Catalyst Silicon Electronic Potting

addition catalyst electronic  potting silicone rubber applications & Features:

It can be vulcanized under room temperature or high temperature with low viscosity, easy mixing and pouring, and it is applicable to bulk pouring with excellent electrical performance. It is applicable to sealing, bonding, coating for electronic parts.

 TECHNICAL GUIDELINES FOR addition catalystELECTRONIC POTTING SILICONE RUBBER.

 1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2, Weight Ratio: part A: part B = 1:1

3, Deaeration the mixture under 0.08 MPa for 3 minutes.

4, The temperature influences the curing time of electronic potting silicone rubber. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.

Warm Tips for addition catalystelectronic potting silicone rubber:

 
1.The following material may hinder the curing of the product, So pls apply after summary 

    experiment. When necessary, pls clean the application areas.  Condensation silicone which not 

    completely cured or organic tin compounds Sulphur, sulfide and sulfur rubber materials.   Amine 

    compounds as well as contains the amine materials. Pewters solder flux.
2. The electronic potting silicon erubber should be sealed storage.The mixture should be used up at

     once, avoid causing waste.

3. The electronic potting silicone rubber belongs to non-dangerous goods, but keep away from

    mouth and eyes.

4. When electronic potting silicone rubber gets stratified after a period of storage, Please mix the

    electronic potting silicone rubber evenly before using, it does not affect the performance

 For get further information about our addition catalystsilicone product, PLS contact with Miss Rose:

Tel: 0086-755-89948294
Fax: 0086-755-89948030
Mobil: 0086-18938867525 

E-mail: hyjz(at)szrl(dot)net
MSN: ross1024(at)msn(dot)cn