200 - 40,000 kilogram
40,001 - 999,999 kilogram
group namePad printing silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-901 silicone
payment methodT/T, L/C, Westem Union
update timeSat, 09 Nov 2013 12:38:25 GMT
color any
Certifications RoHS.MSDS.SGS
Min Order200 kilogram
Usage of pad printing silicon rubber
Pad printing silicon rubber is mainly applicable to the printing of irregular patterns on plastics toys, electroplating products, electronic toys, trademarks, artwork gifts, and stationery, etc.
Description of pad printing silicon rubber
The silicon pad is a carrier which transfers the patterns from the steel plate onto the products’ surface. It has the advantage of good printing effects, good quality, good resilience, and without any impurity.
Technical Datesheets of pad printing silicone rubber :
Model | Appearance | Viscosity (cP) | Hardness (Shore A)
| Tensile strength (MPa) | Tear-strength (kN/m) | Elongation (%) | Mixing ratio ( %) | Pot life( min) | Curing time (h) |
901 | white | 32000±3000 | 21±2 | ≥3.0 | ≥15 | ≥350 | 2~3 | 30 | 2~4 |
Frequently asked question of pad printing silicone rubber:
The reasons why the silicone pad has a short service life are listed as follows:
(1)The problem caused by inappropriate filtration of silicone rubber, and impurities in the packaging process due to the uncleanness of barrels and bags.
(2)The short service life of the silicone pad has a close relationship with the adding amount of silicone oil. The more the silicone oil added, the softer the silicone pad will be. The silicone oil will destroy the molecule of the silicone rubber, thereby bringing about the non-durable and easy ageing of the silicone pad.
(3)All the users should know the properties of pad printing silicone rubber. The service life of the silicone pad has close relationship with the size of the printed patterns. For example, if a big pattern to be printed, a big silicone pad is required; if a small pattern to be printed, a small silicone pad (the silicone pad has to be adjusted according to the size of the patterns, and the proportion between the size of the silicone pad and the pattern is 3:1.)
How to make a silicone pad?
1) At first, prepare all the tools like the pad mold, a cup for mixing, and a glass stick. Clean the pad mould with detergent, and dry the pad mould with an air-gun or cloth, then brush a lay of mold release agent.
2) For second step, adjust the ratio between the silicon rubber and silicon oil according the customer’s requirement. If customers want to print large pattern, soft silicon pad need and silicon oil need to add, otherwise, hard silicone pad need, less silicone oil to add or none.
For get further information about our pad printing silicone rubber, PLS contact with Miss
Rose
TEL: 0086-75589948294
Mobile:086-18938867525
FAX: 086-755-89948030
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.