Pad printing silicone rubber,Good print effect gel

Good print effect gel application:
Good print effect gel is mainly applicable to making pads for plastics toys, electroplating products, electronic toys, trademarks and irregular pattern printing. Pad printing pads is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface.

Good print effect gel features:
Good print effect gel with the advantages of abrasion resistance, high temperature resistance, good printing effect, etc., which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining.

Good print effect gel (916#)datasheet:
Appearance: Red
Viscosity (cps): 35000
Hardness (A): 15
Tensile strength (Mpa) ≥ 3.5
Tear-strength(KN/m)≥ 24
Elongation break: (%)≥ 420
Retractility (%): ≤ 0.3
Curing agent mixed rate (%): 2-3
Operate time (min): 30
Curing time (hours): 2-4
Operation instruction for Good print effect gel

Admixture amount of curing agent and gel reaction: Curing agent reaction rate is related with weather and temperature. Under 25 degree, they can be added according to the instruction or at double amount in winter or under subzero temperature.
(Note: Curing agent can not be added above the 4% maximum level and the normal proportion is 2%. If more than 4% is applied, the gel will condensate too fast for normal usage).

For get further information about our silicone product, PLS contact with Miss Rose

Tel: 0086-75589948294

Mob:086-18938867525