200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameinjection moulding silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHong Ye Silicone HY-922
payment methodT/T, L/C, Westem Union
update timeSat, 09 Nov 2013 12:46:11 GMT
Colour: transparent
Hardness(shore A): 40
Tear strength (KN/mm) 35
Elongation at break (%) 550
Density (g/cm3) 1.08
Viscosity (Pa.S) 600
Model Number: HY-922
Min Order200 kilogram
HTV addition silicone rubber for Injection Baby Nipple
Model: HY-924#
Usage:
Injection molding for baby nipples, cake mold, medical catheter.
Description:
This is a grade liquid silicone rubber suitable for injecting moulding technique with high transparency, strength, and tear strength.
Silicone rubber Typical Properties:
The HY-924 is an injection molding liquid silicon rubber, which is an elastomer cured under high temperature, has the following excellent properties:
High transparency
Excellent tear strength(≥35N/mm)
Good resilience
Good heat stability and weatherability ( temperature resistant range of -60--250)
Anti-yellowing
Heat-ageing resistance
Comply with USA CFR 21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN14350-2 and EU RoHS Standard.
Siilicone rubber Standard Datasheet:
Item | HY-922 | |
Appearance | transparent | |
Viscosity (Pa.S) | 600 | |
Density (g/cm3) | 1.08 | |
Hardness (A°) | 40 | |
Elongation at break (%) | 550 | |
Tear strength (KN/mm) | 35 | |
Curing condition | After Mixed A with B according to mixing ratio of 1:1, 150mm×150mm×2mm, mould will be formed in 7 minutes under temperature of 150 |
Any questions, please feel free to contact Rose:
TEL: 086-755-89948294
FAX: 086-755-89948030
MOBILE:086-18938867525
E-mail: hyjz(at)szrl(dot)net
MSN:ross1024(at)msn(dot)cn
Skype: LuoYan1012
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.