good quality condensation electronic potting silicone rubber

Condensation Electronic Potting Silicone Rubber Applications & Features:

It serves sticky viscosity, low shrinkage and non-corrosiveness. It can be used for a long time under the temperature of -60~200C with the characteristics of moisture-proof and waterproof, radiation-proof, as well as weatherable and anti-ageing. It is applicable to sealing, bonding and coating for electronic parts.

TECHNICAL GUIDELINES FOR ELECTRONIC POTTING SILICONE RUBBER.

1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2, Weight Ratio: part A: part B = 10:1

3, Deaeration the mixture under 0.08 MPa for 3 minutes.

4, The temperature influences the curing time of electronic potting silicone rubber. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.

Warm Tips for electronic potting silicone rubber:

 
1.The following material may hinder the curing of the product, So pls apply after summary 

    experiment. When necessary, pls clean the application areas.  Condensation silicone which not 

    completely cured or organic tin compounds Sulphur, sulfide and sulfur rubber materials.   Amine 

    compounds as well as contains the amine materials. Pewters solder flux.
2. The electronic potting silicon erubber should be sealed storage.The mixture should be used up at

     once, avoid causing waste.

3. The electronic potting silicone rubber belongs to non-dangerous goods, but keep away from

    mouth and eyes.

4. When electronic potting silicone rubber gets stratified after a period of storage, Please mix the

    electronic potting silicone rubber evenly before using, it does not affect the performance

For get further information about our silicone product, PLS contact with Miss RoseMobile:086-18938867525

TEL: 0086-755-89948294

FAX: 086-755-89948030