200 - 2,000 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE620 silicone rubber
payment methodL/C, T/T, Western Union, cash and paypal
update timeThu, 31 Mar 2016 11:39:06 GMT
appearance liquid silicone
application silicone rubber for insole making
hs code 3910000
ship by sea
port shenzhen
hardness 20 shore A
certificates FDA,SGS,ISO
Type addition cure silicone rubber
operating time 30mins
curing time 4H
Weight1.25kg / kilogram
Min Order200 kilogram
Description of Foot Care Additional Silicon Rubber for Insole:
Silicone rubber for silicone insoles is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making masks, arms, legs, and other FDA application.
Application of Foot Care Additional Silicon Rubber for Insole:
Silicone rubber for silicone insoles could be mainly used for making silicone insoles, concrete stones, precision molds, PU molds, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Technique Data of Foot Care Additional Silicon Rubber for Insole:
Model | HY-E620# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 10-15 |
Curing time (Mins 25°C) | 30-50 |
Hardness (A°) | 18-20 |
Density ( g/cm 3 ) | 1.0 |
Viscosity (CS) | 7000±3000 |
Tensile-strength( kgf /cm2 ) | >13 |
Tear-strength (kgf /cm2 ) | > 3 |
Elongation-break(%) | >450 |
Retractility(%) | ≤0.1 |
Piture Show of Foot Care Additional Silicon Rubber for Insole:
Operation of Foot Care Additional Silicon Rubber for Insole:
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Shelf life of Silicone rubber for silicone insoles:
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
Certification of Foot Care Additional Silicon Rubber for Insole:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
SHENZHEN HONG YE JIE TECHNOLOGY CO., LTD
Website: www(at)szrl(dot)net
ADD: Liulian Shibi industrial, Pingdi town, Longgang district, Shenzhen, China
More information needed,Please feel free to contact Miss.Raemon:
E-mail: raemon(at)szrl.net
Tel: 18948315840
Skype: wendy.wen121
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.