group nameVale
Min Order1 piece
modelY13X-1.0
update timeWed, 03 Dec 2014 20:33:46 GMT
Standard or Nonstandard Standard
Structure Pressure Reducing
Pressure Medium Pressure
Power Manual
Material Brass
Temperature of Media Medium Temperature
Media Water
Port Size DN50-200
Min Order1 piece
reducing valve
Size ratio: 2:1 and 3:1
Valve body material is brass
Application:
Used for a central, set the reduced pressure, than before and after the proportional valve pressure, precise proportion no adjustment.
Working principle:
Y series set of internal pressure reducing valve than at both ends of the piston area into specific proportion, and subject to the front pressure and valve pressure P2 P1 after the effect, and the ratio of the P2 when P1 rating of the greater than valve proportion, the piston open, and lithium piston closed, both in the pipeline system under pressure in the case, the piston area at the ends of the poor form the valve pressure difference after before, and is proportional.
Pay attention to the matters:
1, and set the valve type pressure reducing valve than before, after the pressure set, valve into than after pressure can not be adjusted.
2, advice is perpendicular installation, vent not jam.
3, the valve should be often in a dynamic work state, avoid long-term idle.
4, if not for a long time, with artificial activities should be the best before the pistons, and add lubricant.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.