0.3mm Hot Dipped Galvanized Iron Wire for Armouring Cable
group nameGalvanized Wire
-
Min Order1 ton
model0.3mm
-
update timeWed, 03 Dec 2014 20:39:07 GMT
Paramtents
Steel Grade EN 10244
Standard BS
Wire Gauge 0.3mm
Type Galvanized
Application Rope
Alloy Or Not Non-alloy
Special Use Cold Heading Steel
Packging & Delivery
Min Order1 ton
Briefing
1Tensile Strength:390Mpa-500Mpa
2.Zinc Coat:min 500g/m2
3. Coil; Spool
4. Marine c
Detailed
0.3mm Hot Dipped Galvanized Iron Wire for Armouring Cable
Technical Armouring Wire is a soft, heavily Zinc coated wire used in the power, terrestrial and marine communications industry for binding electrical cables which are used in places where the cable maybe subjected to crushing or other injury.
Low carbon armouring wires are produced to meet the requirements of Australian Standard AS 3863 "Galvanised Mild Steel for Armouring Cables"; BS EN 10244 etc. High carbon armouring wires can be produced to customer requirements on request.
Armouring wire is available in diameters ranging from 0.9mm to 8.0mm and is available in either coils or stems.
Armouring Wire Specifications
Diameter Tolerances
Nominal Wire Diameter | Tolerance (mm) |
over 0.15mm up to and incl. 0.80mm over 0.80mm up to and incl. 1.60mm over 1.60mm up to and incl. 2.50mm over 2.50mm up to and incl. 4.00mm over 4.00mm up to and incl. 5.00mm over 5.00mm up to and incl. 8.00mm | +/-0.02 +/-0.03 +/-0.03 +/-0.03 +/-0.04 +/-0.04 |
Galvanised Coating Weight - AS3863; EN 10244
Wire Diameter | Minimum Ctg Mass (g/m2) |
0.24mm 0.25mm 0.30mm 0.45mm 0.50mm 0.90mm 1.25mm 1.60mm 2.00mm 2.50mm 3.15mm 4.00mm 5.0mm 6.0mm 8.0mm | 15 30 30 30 30 150 200 230 240 260 275 290 320 350 430 |
Tensile Strength (MPa)
The tensile strength is defined as the maximum load achieved in a tensile test divided by the cross sectional area of the wire test piece. The tensile strength range for Armouring Wire is 340 to 500 MPa.
Steel Chemistry
The table below is indicative of steel chemistries used for low carbon Armouring Wire.
Element | % |
Carbon Phosphorus Manganese Silicon Sulphur | 0.05 max 0.03 max 0.50 max 0.12/0.18 0.30 max |
Quality Control & manage system
Entire producing process is supervised from raw material to installment on field site.
Qualified Inspector tests each processing as per relative standard and Testing Certificate
Products management system
Save your time and get all relative products in one stop
Feature products
1) Galvanized iron wire with zinc coating 500g/m2
2) Maxiumu Diameter of the wire: 8mm
