group nameHMI Touch Screen Panel
Min Order1 piece
brand nameVICPAS
modelTP-3052S1
payment methodWestern Union, MoneyGram, T/T, Paypal, PayPal, T/T ,Credit Card, Western Union
update timeThu, 16 May 2024 15:48:05 GMT
Warranty 365 Days
Shipping 2-4 workdays
Brand Vicpas
Supply Parts Touch Screen Display
Display Size 5.7 inches
Min Order1 piece
Mounting
Place the TP-3052S1 Touch Screen Glass in a panet cut-out and fasten with the attached mounting clips at four places uniformly. Do not tighten excessively, otherwise it may be defommed or damaged. When installing the TP-3052S1 Touch Membrane vertically, make sure that the power input terminal is on the upper side. If the mounting clips are tightened obliquely to the panel, it may fall off the panel. Please attach this product to press down TP-3052S1 Touch Digitizer Glass in the portion of the mountain of gasket. Once removing especially in the attaching again, be careful. There is a possibility that it may become impossible to maintain waterproof ability.
Notes for Operation
The screen becomes blank when the backlight is burnt out; however, the TP-3052S1 Touchscreen remains enabled. Incorrect touch panel operation will occur when operating the touch panel when the backlight appears to be turned off but is actually burnt out. Please note that this erroneous operation may result in damage. At temperatures over the rated operating temperature, the clock accuracy is affected. Adjust the clock before use. For applications which require clock accuracy, adjust the clock periodically. When more than one button is pressed at the same time, due to the detection characteristics of TP-3052S1 Touch Panel, only the gravity center of the pressed area is sensed and the unit assumes that only one button is pressed. Thus, when more than one button is pressed simultaneously, the resulting operation is not guaranteed.
The table below describes the parameters of the TP-3052S1 Touch Membrane HMI.
Operating Humidity: | 10 to 95% RH |
Operating Temperature: | 0 ~ 50°C |
Display Type: | TFT Color |
Storage Temperature: | -20 ~ 60°C |
Brand: | Vicpas |
Model Number: | TP-3052S1 |
Display Size: | 5.7" |
Warranty: | 1-Year Warranty |
Screen Type: | Analog Resistive Film |
Corrosion Immunity: | Free from corrosive gases |
Question: Can I connect external devices to the TP-3052S1 Machine?
Answer: Yes, the TP-3052S1 HMIs typically offer various communication ports, such as Ethernet, USB, RS232, or RS485. These ports allow you to connect external devices, such as PLCs, sensors, or other control equipment, for data exchange and system integration.
Question: How do I calibrate the touch screen on the TP-3052S1 HMI?
Answer: To calibrate the touch panel of TP-3052S1, go to the calibration settings in the HMI menu. Follow the on-screen instructions to touch specific calibration points accurately. This process ensures accurate touch input across the screen.
P-3052S1
TP-352S1
TTP-3052S1
T-P3052S1
TP--3052S1
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.