group namePool&Spa Filter
Min Order500 piece
brand nameKTMT
payment methodL/C, Western Union, T/T, Paypal
update timeMon, 18 Dec 2017 11:33:03 GMT
Outside Diameter: 65mm,68mm,110mm,114mm
Length: 9.75″、9.87″、10″、20″、30″、40″
Filter medium: Pleated Depth PP, Polyester
Support/Drainage and End caps : Polypropylene (PP)
Adjustable flange : Polypropylene (PP)
Seal Material : EPDM, NBR
Removal Rating: 0.5, 1, 3, 5, 10, 20, 40, 70, 100, 120µm
Maximum Operating Temperature: 80°C
Maximum Differential Pressure: 3.4Bar, 60°C
Item Pool and spa filter cartridge
Size67cm x 40cm x 28cm
Weight20.00kg / piece
Min Order500 piece
Description:
Swimming pool filter cartridge is made of advanced synthetic pleated polyester filtration technology for a larger filter surface area, longer cartridge life, higher flow rate, greater dirt holding capacity, lower pressure drop, and more efficient sediment filtration when compared to other sediment filters. The 100% synthetic cellulose-free pleated polyester media does not contain binders or additives. Additionally, this sediment pleated filter is able to be cleaned and reused between cartridge change-outs to reduce filter replacement costs.Besides, filter media, center pole, end cover as an integral part of the glued together to ensure the end cover sealing better. And due to the folding design provides greater filtration area, providing large filter area, long service life, reducing the filter update times and cost of filtration.
Specification:
Outside Diameter: | 65mm,68mm,110mm,114mm |
Length: | 9.75″,9.87″,10″,20″,30″,40″, 370mm for size 1 bag 634mm for size 2 bag |
Filter medium: | Pleated Depth PP, Polyester |
Support/Drainage and End caps : | Polypropylene (PP) |
Adjustable flange : | Polypropylene (PP) |
Seal Material : | EPDM, NBR |
Removal Rating: | 0.5, 1, 3, 5, 10, 20, 40, 70, 100, 120µm |
Maximum Operating Temperature: | 80°C |
Maximum Differential Pressure: | 3.4Bar, 60°C |
Recommended Change out Differential Pressure: | 2.4Bar, 20°C. |
Feature:
- Pleated
design increased surface area and contaminant removal
--
Longer filtration runs for fewer change-out and less maintenance
--
Low pressure drop
--
Designed for general water filtration purposes
Swimming
Pool water filter used imported paper, PCcore, filter element with high
precision, large flow, pollutant carrying capacity, the initial resistance is
small and suitable for all kinds of water filtration swimming pools and ponds.
Multi-fold
standard pool filter using polyester fiber filter media, with good mechanical
properties and solar, and the center pin glued together from cover,
folding design, filtration area increases, the overall gluing, cover seal good, high tensile strength,
multi-fold filter with a long filter life, less the number of replacement
filter cost and low cost, is widely used in resins, inks, paints, adhesives,
purification, chemical agents, electroplating filtration, solvent and
pharmaceutical filtration, filtration in food and beverage industries,
particularly those with more widely used in swimming pool filters, also known
as the pool filter.
The Cleaning Method
of the Filter
Step
1. Lift the pool filter cartridge straight up to remove it from the pool filter
body.
Step
2. Set the filter cartridge on the lawn and begin cleaning it with a garden
hose. Use a full stray nozzle. A pressure nozzle may be too strong and will
cause unnecessary wear on the pleated folds. When spraying, start at the top of
the cartridge.
Step
3. Work your way straight down the cartridge to work the debris down and out
the bottom of the pool filter cartridge.
Step
4. Rotate the filter cartridge to the next section and starting at the top work
your way down again to the bottom. Continue rotating until the filter cartridge looks clean. Check
inside the folds to make sure all the debris has been removed.
Step
5. Some of the debris will have collected at the bottom. Spend extra time
spraying out the bottom.
Packaging:
1. Products are packed by shrink wrap. It can reduce abrasion when
transport.
2. Products are packed by high quality carton package, suitable for long
distance ocean freight transportation as well as changing climate and with good
resistance to moisture and shocks
Delivery time: If this
kind of product in stock, the product will be send for you 1-7 days after
payment. If this kind of products are not in stock in our factory, the product
will take about 7-25 days to produce.
Shipping: Maritime;
Railway; Air(DHL/UPS/TNT/FEDEX)
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.