Taizhou Chaolong Pump CO.,LTD.

Water controlling Automatic Switch

2009-4-10 13:18:42

This switch has few troubles and long life. It can be used 20 thousand times without any stoppage. Different types are for different size motors.

Temperature controlled switch

2009-4-10 13:23:08

]]>This switch adopts to the temperature controlling Principle, it’s design of special switches for Heating system hot water circulation pump. thus, saving much cost on purchase other temperature controlling device. it can connect with the pump directly as a discreteness of water pump, Enable ordinary hot water circulating upgrade to a automatic temperature controlled circulating pump. there have four stages on the pump. viz. the High stage 60^oC, middling 50^oC, low 40^oC and uninterrupted. When the sensors detect the temperature higher than the set value, the pump will working automatic, when the temperature lower the set value, the pump will stop working. simplenss and convenience. The Temperature, stage and control mode are can adjusted against the different requirements.
This switch??s sensor is high precision NTC, Have strong magnetism, Sensors and switches can be separated, also can Individual fit out.
The Switch Standby prower < 0.1W, The Max Tolerant Current 220V/5A.

Water controlling Automatic Switch

2009-7-3 15:37:42

]]>The switch adopts electronics theory, controlled by water current. It is widely used in mini boosting pumps, solar water-heaters and industrial equipments. When water is on, it will start automatically. Otherwise, it will stop automatically and can adjust sensitively according to the differences pressures. <P>This switch has few troubles and long life. It can be used 20 thousand times without any stoppage. Different types are for different size motors. <BR></P>

To-and-fro pump(diaphragm pump)

2009-7-3 15:53:27

]]><TABLE cellSpacing=0 cellPadding=0 width="100%" border=0> <TBODY> <TR> <TD align=left><SPAN class=re>Use and Features:</SPAN><BR><BR>DC12V or 24V, have the vacuum suction function; low noise, corrosion resistance; small volume, Heigh Suction, High pressure, especial apply to the reverse osmosis water purification system; Water Treatment Equipment; Matching for electric sprayer; Water coolant for the tyre of the car In summer; loading liquid for Chemical and Measurement; sanitation, Environmental protection, printing etc and air pumping for other Industrial equipment or liquid trasportation purposes. </TD></TR> <TR> <TD align=left><SPAN class=re>Structure Chart: </SPAN><BR><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD></TR> <TR> <TD bgColor=#ffffff>1</TD> <TD bgColor=#ffffff>Water outlet </TD> <TD bgColor=#ffffff>7</TD> <TD bgColor=#ffffff>Cover of bearing </TD> <TD bgColor=#ffffff>13</TD> <TD bgColor=#ffffff>Ball bearing(202#) </TD></TR> <TR> <TD bgColor=#ffffff>2</TD> <TD bgColor=#ffffff>Pump body </TD> <TD bgColor=#ffffff>8</TD> <TD bgColor=#ffffff>Front Cover </TD> <TD bgColor=#ffffff>14</TD> <TD bgColor=#ffffff>linker</TD></TR> <TR> <TD bgColor=#ffffff>3</TD> <TD bgColor=#ffffff>Pump cavity </TD> <TD bgColor=#ffffff>9</TD> <TD bgColor=#ffffff>Pump Csaing </TD> <TD bgColor=#ffffff>15</TD> <TD bgColor=#ffffff>Ball bearing(680#)</TD></TR> <TR> <TD bgColor=#ffffff>4</TD> <TD bgColor=#ffffff>Seal</TD> <TD bgColor=#ffffff>10</TD> <TD bgColor=#ffffff>Rotor</TD> <TD bgColor=#ffffff>16</TD> <TD bgColor=#ffffff>Bracket board </TD></TR> <TR> <TD bgColor=#ffffff>5</TD> <TD bgColor=#ffffff>Adaptor</TD> <TD bgColor=#ffffff>11</TD> <TD bgColor=#ffffff>Deflate screw </TD> <TD bgColor=#ffffff>17</TD> <TD bgColor=#ffffff>Back Cover </TD></TR> <TR> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>Pedestal</TD> <TD bgColor=#ffffff>12</TD> <TD bgColor=#ffffff>Water suction valve </TD> <TD bgColor=#ffffff>?</TD> <TD bgColor=#ffffff>?</TD></TR></TBODY></TABLE><SPAN class=re>Technical Data: </SPAN><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle>Model</TD> <TD align=middle>Power <BR>(w)</TD> <TD align=middle>Voltage<BR>DC(v)</TD> <TD align=middle>Speed<BR>(r/min)</TD> <TD align=middle>Head <BR>(m)</TD> <TD align=middle>Suction Head <BR>(m)</TD> <TD align=middle>Capacity <BR>(L/min)</TD> <TD align=middle>G.W.<BR>(kg)</TD> <TD align=middle>Q’ty<BR>(pcs)</TD> <TD align=middle>Package Dimension (cm)</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>WFB-45</TD> <TD align=middle>50</TD> <TD align=middle>12??24</TD> <TD align=middle>3250</TD> <TD align=middle>45</TD> <TD align=middle>9</TD> <TD align=middle>4</TD> <TD align=middle>20.5</TD> <TD align=middle>10</TD> <TD align=middle>56??5??4</TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE>

To-and-fro pump(diaphragm pump)

2009-3-9 9:27:22

]]>

Use and Features:

DC12V or 24V, have the vacuum suction function; low noise, corrosion resistance; small volume, Heigh Suction, High pressure, especial apply to the reverse osmosis water purification system; Water Treatment Equipment; Matching for electric sprayer; Water coolant for the tyre of the car In summer; loading liquid for Chemical and Measurement; sanitation, Environmental protection, printing etc and air pumping for other Industrial equipment or liquid trasportation purposes.

Model	Power (w)	Voltage DC(v)	Speed (r/min)	Head (m)	Suction Head (m)	Capacity (L/min)	G.W. (kg)	Q'ty (pcs)	Package Dimension (cm)
WFB-45	50	1224	3250	45	9	4	20.5	10	562524

Food rubbish processor

2009-7-3 15:40:11

]]><P><SPAN class=re>Features:</SPAN><BR>1.not pile up the food rubbish in the kitchen again.<BR>2.dispose of the rubbish at the firsh time, reduce breeding of pests such as fly, cockroach, mosquito, etc.<BR>3.humanization design to stop accident happens. <BR><BR><SPAN class=re>Main use : </SPAN><BR>Can crush bone,cooked food has thing left, vegetable, peel, etc, hten discharge through the pipeline. Rubbish into thin air that just a touch. </P>

Food rubbish processor

2009-2-24 16:49:48

]]>

Features:
1.not pile up the food rubbish in the kitchen again.
2.dispose of the rubbish at the firsh time, reduce breeding of pests such as fly, cockroach, mosquito, etc.
3.humanization design to stop accident happens.

Main use :
Can crush bone,cooked food has thing left, vegetable, peel, etc, hten discharge through the pipeline. Rubbish into thin air that just a touch.

Temperature controlled switch

2009-7-3 16:11:40

]]>This switch adopts to the temperature controlling Principle, it’s design of special switches for Heating system hot water circulation pump. thus, saving much cost on purchase other temperature controlling device. it can connect with the pump directly as a discreteness of water pump, Enable ordinary hot water circulating upgrade to a automatic temperature controlled circulating pump. there have four stages on the pump. viz. the High stage 60<SUP>o</SUP>C, middling 50<SUP>o</SUP>C, low 40<SUP>o</SUP>C and uninterrupted. When the sensors detect the temperature higher than the set value, the pump will working automatic, when the temperature lower the set value, the pump will stop working. simplenss and convenience. The Temperature, stage and control mode are can adjusted against the different requirements.<BR>This switch??s sensor is high precision NTC, Have strong magnetism, Sensors and switches can be separated, also can Individual fit out.<BR>The Switch Standby prower < 0.1W, The Max Tolerant Current 220V/5A.

Self-priming oil pump(diesel pump)

2009-7-3 15:45:22

]]><P> <TABLE cellSpacing=0 cellPadding=0 width="100%" border=0> <TBODY> <TR> <TD align=left><SPAN class=re>Use and Features:</SPAN><BR>DC12V or 24V, have the vacuum suction function, set the positive and reverse run function; small volume, good performance, Big flow, High discharge height, Very convenient application on various locale, especial applicable to pumping oil liquid for the car or vehicle, more convenience for pumping the oil from the jerrican on gas station. </TD></TR> <TR> <TD align=left><SPAN class=re>Structure Chart: </SPAN><BR><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD></TR> <TR> <TD bgColor=#ffffff>1</TD> <TD bgColor=#ffffff>Cover of pump casing </TD> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>Positive/negative Switch </TD> <TD bgColor=#ffffff>11</TD> <TD bgColor=#ffffff>Fribt Cover </TD></TR> <TR> <TD bgColor=#ffffff>2</TD> <TD bgColor=#ffffff>Outer rotor </TD> <TD bgColor=#ffffff>7</TD> <TD bgColor=#ffffff>Handle</TD> <TD bgColor=#ffffff>12</TD> <TD bgColor=#ffffff>Carbon brush </TD></TR> <TR> <TD bgColor=#ffffff>3</TD> <TD bgColor=#ffffff>Seal</TD> <TD bgColor=#ffffff>8</TD> <TD bgColor=#ffffff>Ball bearing </TD> <TD bgColor=#ffffff>13</TD> <TD bgColor=#ffffff>Rotor </TD></TR> <TR> <TD bgColor=#ffffff>4</TD> <TD bgColor=#ffffff>Pump Body </TD> <TD bgColor=#ffffff>9</TD> <TD bgColor=#ffffff>Back cover </TD> <TD bgColor=#ffffff>14</TD> <TD bgColor=#ffffff>Pump Casing </TD></TR> <TR> <TD bgColor=#ffffff>5</TD> <TD bgColor=#ffffff>Mechanical Seal </TD> <TD bgColor=#ffffff>10</TD> <TD bgColor=#ffffff>Inner rotor </TD> <TD bgColor=#ffffff>15</TD> <TD bgColor=#ffffff>Fuse</TD></TR></TBODY></TABLE><SPAN class=re>Technical Data: </SPAN><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle>Model</TD> <TD align=middle>Power <BR>(w)</TD> <TD align=middle>Voltage<BR>DC(v)</TD> <TD align=middle>Speed<BR>(r/min)</TD> <TD align=middle>Head <BR>(m)</TD> <TD align=middle>Suction Head <BR>(m)</TD> <TD align=middle>Capacity <BR>(L/min)</TD> <TD align=middle>G.W.<BR>(kg)</TD> <TD align=middle>Q’ty<BR>(pcs)</TD> <TD align=middle>Package Dimension (cm)</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>WYB-25</TD> <TD align=middle>370</TD> <TD align=middle>12??24</TD> <TD align=middle>5800</TD> <TD align=middle>25</TD> <TD align=middle>9</TD> <TD align=middle>65</TD> <TD align=middle>34</TD> <TD align=middle>8</TD> <TD align=middle>53??6.5??7</TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE></P>

Magnetic drive pump(water pump)

2009-7-3 15:44:57

]]><P> <TABLE height=100 cellSpacing=0 cellPadding=0 width=500 border=1> <TBODY> <TR> <TD>Parts</TD> <TD>Material</TD></TR> <TR> <TD>1 fixed screw and washer </TD> <TD>stainless steel </TD></TR> <TR> <TD>2 Case </TD> <TD>Glass fiber reinforce polypropylene</TD></TR> <TR> <TD>3 Shaft </TD> <TD>Alumina ceramic</TD></TR> <TR> <TD>4 Impeller </TD> <TD>Glass fiber reinforce polypropylene </TD></TR> <TR> <TD>5 Drived magnet </TD> <TD>Sr ferrite </TD></TR> <TR> <TD>6 Sealring </TD> <TD>Fluoride rubber(FKM)or ternaryethy lenepropylene rubber(EPDM) </TD></TR> <TR> <TD>7 Insulate sheath </TD> <TD>Glass fiber reinforce polypropylene </TD></TR> <TR> <TD>8 Driving magnet </TD> <TD>Sr ferrite </TD></TR> <TR> <TD>9 Motor </TD> <TD></TD></TR></TBODY></TABLE></P><SPAN class=re>Installation Dimensions: unit:(mm)</SPAN><BR> <TABLE height=100 cellSpacing=0 cellPadding=0 width=500 border=1> <TBODY> <TR> <TD>Model</TD> <TD>a</TD> <TD>b</TD> <TD>c</TD> <TD>d</TD> <TD>e</TD> <TD>G</TD> <TD>h</TD> <TD>H</TD> <TD>W</TD> <TD>L</TD></TR> <TR> <TD>8CQ-2</TD> <TD>30</TD> <TD> <P>50</P></TD> <TD>68</TD> <TD>5.5</TD> <TD>46.5</TD> <TD>143</TD> <TD>56</TD> <TD>130</TD> <TD>85</TD> <TD>220.5</TD></TR> <TR> <TD>10CQ-3</TD> <TD>40</TD> <TD> <P>64</P></TD> <TD>100</TD> <TD>9</TD> <TD>48</TD> <TD>169.5</TD> <TD>60</TD> <TD>138</TD> <TD>120</TD> <TD>252.5</TD></TR> <TR> <TD>15CQ-4</TD> <TD>40</TD> <TD>64</TD> <TD>100</TD> <TD>9</TD> <TD>48</TD> <TD>170.5</TD> <TD>60</TD> <TD>138</TD> <TD>120</TD> <TD>277</TD></TR></TBODY></TABLE><SPAN class=re>Technical Data: <TABLE height=100 cellSpacing=0 cellPadding=0 width=500 border=1> <TBODY> <TR> <TD>Model</TD> <TD> <P>Input<BR>(mm)</P></TD> <TD> <P>Outlet<BR>(mm)</P></TD> <TD>Highest<BR>Head<BR>(m) </TD> <TD>Max.<BR>Capacity<BR>(L/min)</TD> <TD>Power<BR>(w)</TD> <TD>Speed<BR>(r/min)</TD> <TD>Voltage<BR>(V)</TD> <TD>Q’ty<BR>(Pcs)</TD> <TD>G.W.<BR>(Kg)</TD> <TD>Package<BR>Dimension<BR>(cm)</TD></TR> <TR> <TD>8CQ-2</TD> <TD>8</TD> <TD>6</TD> <TD>2</TD> <TD>15</TD> <TD>20</TD> <TD>2750</TD> <TD>220-240</TD> <TD>10</TD> <TD>17</TD> <TD>75*25*30</TD></TR> <TR> <TD>10CQ-3</TD> <TD>10</TD> <TD>10</TD> <TD>3</TD> <TD>20</TD> <TD>20</TD> <TD>2750</TD> <TD>220-240</TD> <TD>10</TD> <TD>22</TD> <TD>75*25*30</TD></TR> <TR> <TD>15CQ-4</TD> <TD>15</TD> <TD>10</TD> <TD>4</TD> <TD>25</TD> <TD>40</TD> <TD>2750</TD> <TD>220-240</TD> <TD>10</TD> <TD>34</TD> <TD>75*20*30</TD></TR></TBODY></TABLE></SPAN><BR>

Submersible Pump

2009-7-3 15:41:11

]]>Mechanical seal is not required, thus completely solve pump leadking, Avoid motor burn or accident caused electrocutions, therefore very safely; adopt to the stainless steel motor shaft, graphite bearing, water cycle between stator and rotaor, Not only for cooling, also can be used for bearing lubrication, completely solved the noise problem in working. advanced scientific design, Normal continuous use for 30,000 hours Trouble-free and maintenance-free. Set overload, and the water shortage automatic shutdown protection; the pump's shell used the stainless steel or corrosion-resistant materials never rust. more sanitary in water use; High discharge height, big flow apply to the Agricultural irrigation and pumping; the Industrial liquid pumping and drainage; Family, Eatery, Hotel Water Usage etc.

Solar water pumps

2009-7-3 15:40:41

]]><P><SPAN class=re>Features:</SPAN><BR>The automatic switch adopts electronics theory, controlled by water current. The pump boosts pressure automatically when the tap is on, and turned off when the tap is off. It is used conveniently, and also saves power. Its copper pump body, copper impeller and stainless steel shaft are corrosion-resistant, stainless. The whole pump is sealed well and the conveyed water will be sanitary. Its total suction lift is high. Flow rate is large. It starts well, swithches sensitively and automatically, produces low noise. It also is designed to be low temperature, small volumn, delicate appereance and long-working time. <BR><SPAN class=re>Main use: </SPAN><BR>This pump absolutely solves the lit fire properly of shower owing to the lower pressure and unreliable pressure. When the tap water is of low pressure, the pump can boost pressure. It can also boost pressure for solar water heaters, boost pressure and circulate water for industrial equipments, and increas oxygen for rearing ponds and fish tanks. GR hot-water pumps boost pressure and circulate hot water for boilers besides above using. GZ best feature is that it can suck tap water from one or two floor below directly. So it compeletely solves the problem that the higher floors don’t have water while the lower floors have. <BR></P>

Automatic Boosing Pump

2009-7-3 15:59:03

]]><TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD></TR> <TR> <TD bgColor=#ffffff>1</TD> <TD bgColor=#ffffff>Terminal box </TD> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>Seal ring </TD> <TD bgColor=#ffffff>11</TD> <TD bgColor=#ffffff>Rotor</TD></TR> <TR> <TD bgColor=#ffffff>2</TD> <TD bgColor=#ffffff>Stator (Coil winding) </TD> <TD bgColor=#ffffff>7</TD> <TD bgColor=#ffffff>Automatic-controling device </TD> <TD bgColor=#ffffff>12</TD> <TD bgColor=#ffffff>Fix board </TD></TR> <TR> <TD bgColor=#ffffff>3</TD> <TD bgColor=#ffffff>Protection cover </TD> <TD bgColor=#ffffff>8</TD> <TD bgColor=#ffffff>Pump casing </TD> <TD bgColor=#ffffff>13</TD> <TD bgColor=#ffffff>Impeller</TD></TR> <TR> <TD bgColor=#ffffff>4</TD> <TD bgColor=#ffffff>Steel shielding </TD> <TD bgColor=#ffffff>9</TD> <TD bgColor=#ffffff>Water-sealing bolt </TD> <TD bgColor=#ffffff></TD> <TD bgColor=#ffffff></TD></TR> <TR> <TD bgColor=#ffffff>5</TD> <TD bgColor=#ffffff>Ceramic bearing </TD> <TD bgColor=#ffffff>10</TD> <TD bgColor=#ffffff>Motor Housing </TD> <TD bgColor=#ffffff></TD> <TD bgColor=#ffffff></TD></TR></TBODY></TABLE> <P> </P> <P> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle>Model</TD> <TD align=middle>Max.Power<BR>(w)</TD> <TD align=middle>Voltage<BR>(v)</TD> <TD align=middle>Frequency<BR>(Hz)</TD> <TD align=middle>Input&Outlet Dia. <BR>(mm)(in)</TD> <TD align=middle>Speed<BR>(r/min)</TD> <TD align=middle>Highest Head <BR>(m</TD> <TD align=middle>Max.Capacity<BR>(L/min)</TD> <TD align=middle>G.W.<BR>(kg)</TD> <TD align=middle>Q’ty<BR>(pcs)</TD> <TD align=middle>Package Dimension <BR>(cm)</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>15PBG-7-N</TD> <TD align=middle>90</TD> <TD align=middle>220-240</TD> <TD align=middle>50</TD> <TD align=middle>15(3/4)"</TD> <TD align=middle>2800</TD> <TD align=middle>7</TD> <TD align=middle>30</TD> <TD align=middle>23</TD> <TD align=middle>8</TD> <TD align=middle>28.8*28*31.6</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>15PBG-9-N</TD> <TD align=middle>120</TD> <TD align=middle>220-240</TD> <TD align=middle>50</TD> <TD align=middle>15(3/4)"</TD> <TD align=middle>2800</TD> <TD align=middle>9</TD> <TD align=middle>40</TD> <TD align=middle>26</TD> <TD align=middle>8</TD> <TD align=middle> <P>28.8*28*31</P></TD></TR></TBODY></TABLE></P>

Circulating Pump

2009-7-3 16:12:01

Pipe pump

2009-7-3 16:11:05

]]><P> <TABLE cellSpacing=0 cellPadding=0 width="100%" border=0> <TBODY> <TR> <TD style="PADDING-BOTTOM: 6px; PADDING-TOP: 6px" colSpan=2> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle>Model</TD> <TD align=middle>Max.Power</TD> <TD align=middle>Rated Power </TD> <TD align=middle>Min.<BR>Power</TD> <TD align=middle>Dia.<BR></TD> <TD align=middle>Voltage</TD> <TD align=middle>Frequercy</TD> <TD align=middle>G.W</TD> <TD align=middle>Q’ty</TD> <TD align=middle>Package Dimension</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle><STRONG>25PBG-6-N(B)</STRONG></TD> <TD align=middle>120W</TD> <TD align=middle>90W</TD> <TD align=middle>60W</TD> <TD align=middle>25mm(1??)</TD> <TD align=middle>220~240V</TD> <TD align=middle>50Hz</TD> <TD align=middle>25kg</TD> <TD align=middle>8 Pcs </TD> <TD align=middle>28.8*28*33.6cm</TD></TR></TBODY></TABLE></TD></TR> <TR> <TD width="57%"> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#ffffff>Positice</TD> <TD bgColor=#ffffff>Hightest Head <BR>(m)</TD> <TD bgColor=#ffffff>Max. Capacity <BR>(L/min)</TD> <TD bgColor=#ffffff>Speed<BR>(r/min)</TD></TR> <TR> <TD bgColor=#ffffff>III</TD> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>70</TD> <TD bgColor=#ffffff>2410</TD></TR> <TR> <TD bgColor=#ffffff>II</TD> <TD bgColor=#ffffff>4</TD> <TD bgColor=#ffffff>45</TD> <TD bgColor=#ffffff>2080</TD></TR> <TR> <TD bgColor=#ffffff>I</TD> <TD bgColor=#ffffff>3</TD> <TD bgColor=#ffffff>30</TD> <TD bgColor=#ffffff>1680</TD></TR></TBODY></TABLE></TD> <TD width="43%">?</TD></TR> <TR> <TD style="PADDING-BOTTOM: 6px; PADDING-TOP: 6px" colSpan=2> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle>Model</TD> <TD align=middle>Max.Power</TD> <TD align=middle>Rated Power </TD> <TD align=middle>Min.<BR>Power</TD> <TD align=middle>Dia.<BR></TD> <TD align=middle>Voltage</TD> <TD align=middle>Frequercy</TD> <TD align=middle>G.W</TD> <TD align=middle>Q’ty</TD> <TD align=middle>Package Dimension</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle><STRONG>40PBG-6-N(B)</STRONG></TD> <TD align=middle>120W</TD> <TD align=middle>90W</TD> <TD align=middle>60W</TD> <TD align=middle>25mm(1<FONT style="FONT-SIZE: 9px">1/2"</FONT>)</TD> <TD align=middle>220~240V</TD> <TD align=middle>50Hz</TD> <TD align=middle>26kg</TD> <TD align=middle>8 Pcs </TD> <TD align=middle>28.8*28*33.6cm</TD></TR></TBODY></TABLE></TD></TR> <TR> <TD> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#ffffff>Positice</TD> <TD bgColor=#ffffff>Hightest Head <BR>(m)</TD> <TD bgColor=#ffffff>Max. Capacity <BR>(L/min)</TD> <TD bgColor=#ffffff>Speed<BR>(r/min)</TD></TR> <TR> <TD bgColor=#ffffff>III</TD> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>80</TD> <TD bgColor=#ffffff>2410</TD></TR> <TR> <TD bgColor=#ffffff>II</TD> <TD bgColor=#ffffff>4</TD> <TD bgColor=#ffffff>55</TD> <TD bgColor=#ffffff>2080</TD></TR> <TR> <TD bgColor=#ffffff>I</TD> <TD bgColor=#ffffff>3</TD> <TD bgColor=#ffffff>35</TD> <TD bgColor=#ffffff>1680</TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE></P>

Circulation Pumps

2009-7-3 16:09:27

]]><TABLE cellSpacing=0 cellPadding=0 width="100%" border=0> <TBODY> <TR> <TD style="PADDING-BOTTOM: 6px; PADDING-TOP: 6px" colSpan=2> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle>Model</TD> <TD align=middle>Max.Power</TD> <TD align=middle>Rated Power </TD> <TD align=middle>Min.<BR>Power</TD> <TD align=middle>Dia.<BR></TD> <TD align=middle>Voltage</TD> <TD align=middle>Frequercy</TD> <TD align=middle>G.W</TD> <TD align=middle>Q??ty</TD> <TD align=middle>Package Dimension</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle><STRONG>25PBG-6-N(C)</STRONG></TD> <TD align=middle>100W</TD> <TD align=middle>90W</TD> <TD align=middle>55W</TD> <TD align=middle>25mm(1??)</TD> <TD align=middle>220~240V</TD> <TD align=middle>50Hz</TD> <TD align=middle>24kg</TD> <TD align=middle>8 Pcs </TD> <TD align=middle>38.5*28.5*28.5cm</TD></TR></TBODY></TABLE></TD></TR> <TR> <TD width="57%"> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#ffffff>Positice</TD> <TD bgColor=#ffffff>Hightest Head <BR>(m)</TD> <TD bgColor=#ffffff>Max. Capacity <BR>(L/min)</TD> <TD bgColor=#ffffff>Speed<BR>(r/min)</TD></TR> <TR> <TD bgColor=#ffffff>III</TD> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>70</TD> <TD bgColor=#ffffff>2410</TD></TR> <TR> <TD bgColor=#ffffff>II</TD> <TD bgColor=#ffffff>5</TD> <TD bgColor=#ffffff>55</TD> <TD bgColor=#ffffff>2080</TD></TR> <TR> <TD bgColor=#ffffff>I</TD> <TD bgColor=#ffffff>4</TD> <TD bgColor=#ffffff>30</TD> <TD bgColor=#ffffff>1680</TD></TR></TBODY></TABLE></TD> <TD width="43%"></TD></TR> <TR> <TD style="PADDING-BOTTOM: 6px; PADDING-TOP: 6px" colSpan=2> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle>Model</TD> <TD align=middle>Max.Power</TD> <TD align=middle>Rated Power </TD> <TD align=middle>Min.<BR>Power</TD> <TD align=middle>Dia.<BR></TD> <TD align=middle>Voltage</TD> <TD align=middle>Frequercy</TD> <TD align=middle>G.W</TD> <TD align=middle>Q??ty</TD> <TD align=middle>Package Dimension</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle><STRONG>40PBG-6-N<BR>50PBG-6-N (C\D)</STRONG></TD> <TD align=middle>100W</TD> <TD align=middle>90W</TD> <TD align=middle>55W</TD> <TD align=middle>40mm(1<FONT style="FONT-SIZE: 9px">1/2"</FONT>)</TD> <TD align=middle>220~240V</TD> <TD align=middle>50Hz</TD> <TD align=middle>24.5kg</TD> <TD align=middle>8 Pcs </TD> <TD align=middle>38.5*28.5*28.5cm</TD></TR></TBODY></TABLE></TD></TR> <TR> <TD> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#ffffff>Positice</TD> <TD bgColor=#ffffff>Hightest Head <BR>(m)</TD> <TD bgColor=#ffffff>Max. Capacity <BR>(L/min)</TD> <TD bgColor=#ffffff>Speed<BR>(r/min)</TD></TR> <TR> <TD bgColor=#ffffff>III</TD> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>80</TD> <TD bgColor=#ffffff>2410</TD></TR> <TR> <TD bgColor=#ffffff>II</TD> <TD bgColor=#ffffff>5</TD> <TD bgColor=#ffffff>65</TD> <TD bgColor=#ffffff>2080</TD></TR> <TR> <TD bgColor=#ffffff>I</TD> <TD bgColor=#ffffff>4</TD> <TD bgColor=#ffffff>40</TD> <TD bgColor=#ffffff>1680</TD></TR></TBODY></TABLE></TD> <TD></TD></TR></TBODY></TABLE>

Circulation pump

2009-10-6 15:47:47

]]><TABLE cellSpacing=0 cellPadding=0 width="100%" border=0> <TBODY> <TR> <TD align=left colSpan=2><SPAN class=re>Technical Data: </SPAN></TD></TR> <TR> <TD style="PADDING-BOTTOM: 6px; PADDING-TOP: 6px" colSpan=2> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle>Model</TD> <TD align=middle>Max.Power</TD> <TD align=middle>Rated Power </TD> <TD align=middle>Min.<BR>Power</TD> <TD align=middle>Dia.<BR></TD> <TD align=middle>Voltage</TD> <TD align=middle>Frequercy</TD> <TD align=middle>G.W</TD> <TD align=middle>Qty</TD> <TD align=middle>Package Dimension</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle><STRONG>25PBG-11-N</STRONG></TD> <TD align=middle>150W</TD> <TD align=middle>120W</TD> <TD align=middle>80W</TD> <TD align=middle>25mm(1)</TD> <TD align=middle>220~240V</TD> <TD align=middle>50Hz</TD> <TD align=middle>19kg</TD> <TD align=middle>4 Pcs </TD> <TD align=middle>38.8*30.8*17.5cm</TD></TR></TBODY></TABLE></TD></TR> <TR> <TD width="57%"> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#ffffff>Positice</TD> <TD bgColor=#ffffff>Hightest Head <BR>(m)</TD> <TD bgColor=#ffffff>Max. Capacity <BR>(L/min)</TD> <TD bgColor=#ffffff>Speed<BR>(r/min)</TD></TR> <TR> <TD bgColor=#ffffff>III</TD> <TD bgColor=#ffffff>11</TD> <TD bgColor=#ffffff>35</TD> <TD bgColor=#ffffff>2410</TD></TR> <TR> <TD bgColor=#ffffff>II</TD> <TD bgColor=#ffffff>8</TD> <TD bgColor=#ffffff>25</TD> <TD bgColor=#ffffff>2080</TD></TR> <TR> <TD bgColor=#ffffff>I</TD> <TD bgColor=#ffffff>5</TD> <TD bgColor=#ffffff>18</TD> <TD bgColor=#ffffff>1680</TD></TR></TBODY></TABLE></TD> <TD width="43%">?</TD></TR> <TR> <TD style="PADDING-BOTTOM: 6px; PADDING-TOP: 6px" colSpan=2> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle>Model</TD> <TD align=middle>Max.Power</TD> <TD align=middle>Rated Power </TD> <TD align=middle>Min.<BR>Power</TD> <TD align=middle>Dia.<BR></TD> <TD align=middle>Voltage</TD> <TD align=middle>Frequercy</TD> <TD align=middle>G.W</TD> <TD align=middle>Qty</TD> <TD align=middle>Package Dimension</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle><STRONG>25PBG-13-N</STRONG></TD> <TD align=middle>280W</TD> <TD align=middle>250W</TD> <TD align=middle>120W</TD> <TD align=middle>15mm(<FONT style="FONT-SIZE: 9px">3/4"</FONT>)</TD> <TD align=middle>220~240V</TD> <TD align=middle>50Hz</TD> <TD align=middle>25kg</TD> <TD align=middle>4 Pcs </TD> <TD align=middle>38.8*33.2*20.3cm</TD></TR></TBODY></TABLE></TD></TR> <TR> <TD> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#ffffff>Positice</TD> <TD bgColor=#ffffff>Hightest Head <BR>(m)</TD> <TD bgColor=#ffffff>Max. Capacity <BR>(L/min)</TD> <TD bgColor=#ffffff>Speed<BR>(r/min)</TD></TR> <TR> <TD bgColor=#ffffff>III</TD> <TD bgColor=#ffffff>13</TD> <TD bgColor=#ffffff>65</TD> <TD bgColor=#ffffff>2450</TD></TR> <TR> <TD bgColor=#ffffff>II</TD> <TD bgColor=#ffffff>10</TD> <TD bgColor=#ffffff>55</TD> <TD bgColor=#ffffff>2150</TD></TR> <TR> <TD bgColor=#ffffff>I</TD> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>30</TD> <TD bgColor=#ffffff>1800</TD></TR></TBODY></TABLE></TD> <TD></TD></TR></TBODY></TABLE>

Family booster pumps

2009-7-3 16:08:24

]]><P><SPAN class=re>Technical Data: </SPAN><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle rowSpan=2>Model</TD> <TD align=middle rowSpan=2>Power <BR>(w)</TD> <TD align=middle rowSpan=2>Voltage<BR>(v)</TD> <TD align=middle rowSpan=2>Frequ-ency<BR>(Hz)</TD> <TD align=middle rowSpan=2>Speed<BR>(r/min)</TD> <TD align=middle rowSpan=2>Input & outlet Dia. <BR>(mm)(in)</TD> <TD align=middle rowSpan=2>Hig- hest Head <BR>(m)</TD> <TD align=middle rowSpan=2>Rated Head <BR>(m)</TD> <TD align=middle rowSpan=2>Max. Cap-acity <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>Rated Capa-city <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>G.W.<BR>(kg)</TD> <TD align=middle rowSpan=2>Q??ty<BR>(pcs)</TD> <TD align=middle colSpan=3>Package Dimension (cm)</TD></TR> <TR> <TD align=middle bgColor=#efefef>L</TD> <TD align=middle bgColor=#efefef>W</TD> <TD align=middle bgColor=#efefef>H</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>CL15G-10</TD> <TD align=middle>90</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>15</TD> <TD align=middle>10</TD> <TD align=middle>6</TD> <TD align=middle>20</TD> <TD align=middle>8</TD> <TD align=middle>26</TD> <TD align=middle>8</TD> <TD align=middle>42.8</TD> <TD align=middle>32</TD> <TD align=middle>27.5</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>CL15G-15</TD> <TD align=middle>120</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>15</TD> <TD align=middle>15</TD> <TD align=middle>10</TD> <TD align=middle>25</TD> <TD align=middle>10</TD> <TD align=middle>17</TD> <TD align=middle>4</TD> <TD align=middle>30.5</TD> <TD align=middle>24.5</TD> <TD align=middle>32.5</TD></TR></TBODY></TABLE></P> <P> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD></TR> <TR> <TD bgColor=#ffffff>1</TD> <TD bgColor=#ffffff>Steel housing </TD> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>Copper adaptor </TD> <TD bgColor=#ffffff>11</TD> <TD bgColor=#ffffff>Stator (Coil winding) </TD></TR> <TR> <TD bgColor=#ffffff>2</TD> <TD bgColor=#ffffff>End-shield</TD> <TD bgColor=#ffffff>7</TD> <TD bgColor=#ffffff>Copper Impeller </TD> <TD bgColor=#ffffff>12</TD> <TD bgColor=#ffffff>Ball bearing </TD></TR> <TR> <TD bgColor=#ffffff>3</TD> <TD bgColor=#ffffff>Ball bearing </TD> <TD bgColor=#ffffff>8</TD> <TD bgColor=#ffffff>Automatic switch </TD> <TD bgColor=#ffffff>13</TD> <TD bgColor=#ffffff>Mechanical seal </TD></TR> <TR> <TD bgColor=#ffffff>4</TD> <TD bgColor=#ffffff>Rotor</TD> <TD bgColor=#ffffff>9</TD> <TD bgColor=#ffffff>Base bracket </TD> <TD bgColor=#ffffff>14</TD> <TD bgColor=#ffffff>Copper pump head </TD></TR> <TR> <TD bgColor=#ffffff>5</TD> <TD bgColor=#ffffff>Front-shield</TD> <TD bgColor=#ffffff>10</TD> <TD bgColor=#ffffff>Bolt</TD> <TD bgColor=#ffffff>15</TD> <TD bgColor=#ffffff>Bolt</TD></TR></TBODY></TABLE></P>

Family booster pump

2009-7-3 16:06:47

]]><SPAN class=re>Technical Data: </SPAN><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle rowSpan=2>Model</TD> <TD align=middle rowSpan=2>Power <BR>(w)</TD> <TD align=middle rowSpan=2>Voltage<BR>(v)</TD> <TD align=middle rowSpan=2>Frequ-ency<BR>(Hz)</TD> <TD align=middle rowSpan=2>Speed<BR>(r/min)</TD> <TD align=middle rowSpan=2>Input & outlet Dia. <BR>(mm)</TD> <TD align=middle rowSpan=2>Hig- hest Head <BR>(m)</TD> <TD align=middle rowSpan=2>Rated Head <BR>(m)</TD> <TD align=middle rowSpan=2>Max. Cap-acity <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>Rated Capa-city <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>G.W.<BR>(kg)</TD> <TD align=middle rowSpan=2>Q’ty<BR>(pcs)</TD> <TD align=middle colSpan=3>Package Dime-<BR>nsion (cm)</TD></TR> <TR> <TD align=middle bgColor=#efefef>L</TD> <TD align=middle bgColor=#efefef>W</TD> <TD align=middle bgColor=#efefef>H</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>CL18GZ-16</TD> <TD align=middle>200</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>18</TD> <TD align=middle>16</TD> <TD align=middle>10</TD> <TD align=middle>25</TD> <TD align=middle>10</TD> <TD align=middle>22</TD> <TD align=middle>4</TD> <TD align=middle>39.6</TD> <TD align=middle>25</TD> <TD align=middle>34</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>CL18G-18</TD> <TD align=middle>250</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>18</TD> <TD align=middle>18</TD> <TD align=middle>10</TD> <TD align=middle>30</TD> <TD align=middle>12</TD> <TD align=middle>24</TD> <TD align=middle>4</TD> <TD align=middle>39.6</TD> <TD align=middle>25</TD> <TD align=middle>34</TD></TR></TBODY></TABLE> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD></TR> <TR> <TD bgColor=#ffffff>1</TD> <TD bgColor=#ffffff>Fan cover </TD> <TD bgColor=#ffffff>7</TD> <TD bgColor=#ffffff>Copper Impeller </TD> <TD bgColor=#ffffff>13</TD> <TD bgColor=#ffffff>Front-shield</TD></TR> <TR> <TD bgColor=#ffffff>2</TD> <TD bgColor=#ffffff>End-shield</TD> <TD bgColor=#ffffff>8</TD> <TD bgColor=#ffffff>Automatic switch </TD> <TD bgColor=#ffffff>14</TD> <TD bgColor=#ffffff>Coppet adaptor </TD></TR> <TR> <TD bgColor=#ffffff>3</TD> <TD bgColor=#ffffff>Ball bearing </TD> <TD bgColor=#ffffff>9</TD> <TD bgColor=#ffffff>Bolt</TD> <TD bgColor=#ffffff>15</TD> <TD bgColor=#ffffff>Mechanical seal </TD></TR> <TR> <TD bgColor=#ffffff>4</TD> <TD bgColor=#ffffff>Stator (Coil winding) </TD> <TD bgColor=#ffffff>10</TD> <TD bgColor=#ffffff>Fan</TD> <TD bgColor=#ffffff>16</TD> <TD bgColor=#ffffff>Copper pump casing </TD></TR> <TR> <TD bgColor=#ffffff>5</TD> <TD bgColor=#ffffff>Ball bering </TD> <TD bgColor=#ffffff>11</TD> <TD bgColor=#ffffff>Base bracket </TD> <TD bgColor=#ffffff>?</TD> <TD bgColor=#ffffff>?</TD></TR> <TR> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>Bolt</TD> <TD bgColor=#ffffff>12</TD> <TD bgColor=#ffffff>Rotor</TD> <TD bgColor=#ffffff>?</TD> <TD bgColor=#ffffff>?</TD></TR></TBODY></TABLE>

Domestic Boosting Pump

2009-7-3 16:06:23

]]><SPAN class=re>Technical Data: </SPAN><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle rowSpan=2>Model</TD> <TD align=middle rowSpan=2>Power <BR>(w)</TD> <TD align=middle rowSpan=2>Voltage<BR>(v)</TD> <TD align=middle rowSpan=2>Frequ-ency<BR>(Hz)</TD> <TD align=middle rowSpan=2>Speed<BR>(r/min)</TD> <TD align=middle rowSpan=2>Input & outlet Dia. <BR>(mm)</TD> <TD align=middle rowSpan=2>Hig- hest Head <BR>(m)</TD> <TD align=middle rowSpan=2>Rated Head <BR>(m)</TD> <TD align=middle rowSpan=2>Max. Cap-acity <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>Rated Capa-city <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>G.W.<BR>(kg)</TD> <TD align=middle rowSpan=2>Q??ty<BR>(pcs)</TD> <TD align=middle colSpan=3>Package Dimen-<BR>sion (cm)</TD></TR> <TR> <TD align=middle bgColor=#efefef>L</TD> <TD align=middle bgColor=#efefef>W</TD> <TD align=middle bgColor=#efefef>H</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>CL15GR-10</TD> <TD align=middle>90</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>15</TD> <TD align=middle>10</TD> <TD align=middle>6</TD> <TD align=middle>20</TD> <TD align=middle>8</TD> <TD align=middle>26</TD> <TD align=middle>8</TD> <TD align=middle>42.8</TD> <TD align=middle>32</TD> <TD align=middle>27.5</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>CL15GR-15</TD> <TD align=middle>120</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>15</TD> <TD align=middle>15</TD> <TD align=middle>10</TD> <TD align=middle>25</TD> <TD align=middle>10</TD> <TD align=middle>18</TD> <TD align=middle>4</TD> <TD align=middle>30.5</TD> <TD align=middle>24.5</TD> <TD align=middle>32.5</TD></TR></TBODY></TABLE> <P>?</P> <P> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD></TR> <TR> <TD bgColor=#ffffff>1</TD> <TD bgColor=#ffffff>Fan cover </TD> <TD bgColor=#ffffff>7</TD> <TD bgColor=#ffffff>Bolt</TD> <TD bgColor=#ffffff>13</TD> <TD bgColor=#ffffff>Rotor</TD></TR> <TR> <TD bgColor=#ffffff>2</TD> <TD bgColor=#ffffff>End-shield</TD> <TD bgColor=#ffffff>8</TD> <TD bgColor=#ffffff>Copper Impeller </TD> <TD bgColor=#ffffff>14</TD> <TD bgColor=#ffffff>Front-shield</TD></TR> <TR> <TD bgColor=#ffffff>3</TD> <TD bgColor=#ffffff>Ball bearing </TD> <TD bgColor=#ffffff>9</TD> <TD bgColor=#ffffff>Automatic switch </TD> <TD bgColor=#ffffff>15</TD> <TD bgColor=#ffffff>Coppet adaptor </TD></TR> <TR> <TD bgColor=#ffffff>4</TD> <TD bgColor=#ffffff>Stator (Coil winding) </TD> <TD bgColor=#ffffff>10</TD> <TD bgColor=#ffffff>Bolt</TD> <TD bgColor=#ffffff>16</TD> <TD bgColor=#ffffff>Mechanical seal </TD></TR> <TR> <TD bgColor=#ffffff>5</TD> <TD bgColor=#ffffff>Ball bering </TD> <TD bgColor=#ffffff>11</TD> <TD bgColor=#ffffff>Fan</TD> <TD bgColor=#ffffff>17</TD> <TD bgColor=#ffffff>Copper pump casing </TD></TR> <TR> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>Thermal insulation ring </TD> <TD bgColor=#ffffff>12</TD> <TD bgColor=#ffffff>Base bracket </TD></TR></TBODY></TABLE></P>

High Pressure Pump

2009-7-3 16:02:13

]]><TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle rowSpan=2>Model</TD> <TD align=middle rowSpan=2>Power <BR>(w)</TD> <TD align=middle rowSpan=2>Volt<BR>age<BR>(v)</TD> <TD align=middle rowSpan=2>Freq-ency<BR>(Hz)</TD> <TD align=middle rowSpan=2>Speed<BR>(r/min)</TD> <TD align=middle rowSpan=2>Input & outlet Dia. <BR>(mm)</TD> <TD align=middle rowSpan=2>Hig- hest Head <BR>(m)</TD> <TD align=middle rowSpan=2>Rated Head <BR>(m)</TD> <TD align=middle rowSpan=2>Max. Cap-acity <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>Rated Capa-city <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>Suct-<BR>ion Head <BR>(m)</TD> <TD align=middle rowSpan=2>G.W.<BR>(kg)</TD> <TD align=middle rowSpan=2>Q’ty<BR>(pcs)</TD> <TD align=middle colSpan=3>Package<BR>Dime-<BR>nsion <BR>(cm)</TD></TR> <TR> <TD align=middle bgColor=#efefef>L</TD> <TD align=middle bgColor=#efefef>W</TD> <TD align=middle bgColor=#efefef>H</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>20GZ0.5-14</TD> <TD align=middle>180</TD> <TD align=middle>220</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>20</TD> <TD align=middle>22</TD> <TD align=middle>14</TD> <TD align=middle>1.5</TD> <TD align=middle>0.5</TD> <TD align=middle>6</TD> <TD align=middle>20</TD> <TD align=middle>2</TD> <TD align=middle>38</TD> <TD align=middle>35.5</TD> <TD align=middle>31</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>20GZ0.8-15</TD> <TD align=middle>370</TD> <TD align=middle>220</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>20</TD> <TD align=middle>30</TD> <TD align=middle>15</TD> <TD align=middle>1.8</TD> <TD align=middle>0.8</TD> <TD align=middle>6</TD> <TD align=middle>21</TD> <TD align=middle>2</TD> <TD align=middle>38</TD> <TD align=middle>35.5</TD> <TD align=middle>34</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>25GZ1.2-25</TD> <TD align=middle>550</TD> <TD align=middle>220</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>25</TD> <TD align=middle>45</TD> <TD align=middle>25</TD> <TD align=middle>2.8</TD> <TD align=middle>1.2</TD> <TD align=middle>6</TD> <TD align=middle>31</TD> <TD align=middle>2</TD> <TD align=middle>41.5</TD> <TD align=middle>41.5</TD> <TD align=middle>35.5</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>40GZ1.2-25</TD> <TD align=middle>750</TD> <TD align=middle>220</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>40</TD> <TD align=middle>50</TD> <TD align=middle>25</TD> <TD align=middle>2.8</TD> <TD align=middle>1.2</TD> <TD align=middle>6</TD> <TD align=middle>39</TD> <TD align=middle>2</TD> <TD align=middle>42</TD> <TD align=middle>40</TD> <TD align=middle>40</TD></TR></TBODY></TABLE>

Priming Pump

2009-7-3 15:56:38

]]><P><BR>It has 17 kinds of descriptions,For example, are? Suction flange, Pump casing,? Terminal box ,Ball bearing?? ,Rotor,Wave washer? ,Fan ,Fan cover,Bolt,Board , Copper Impeller ,Mechanical seal,Tie-rod ,, Motor housing? , Ball bearing ,End-shield,Bolt .</P> <P><SPAN class=re>Technical Data: </SPAN><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle rowSpan=2>Model</TD> <TD align=middle rowSpan=2>Power <BR>(w)</TD> <TD align=middle rowSpan=2>Volt-<BR>age<BR>(v)</TD> <TD align=middle rowSpan=2>Frequ-ency<BR>(Hz)</TD> <TD align=middle rowSpan=2>Speed<BR>(r/min)</TD> <TD align=middle rowSpan=2>Hig-<BR>hest <BR>Head <BR>(m)</TD> <TD align=middle rowSpan=2>Rated Head <BR>(m)</TD> <TD align=middle rowSpan=2>Max. Cap-acity <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>Rated Capa<BR>-city <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>Suct-<BR>ion<BR>Head <BR>(m)</TD> <TD align=middle rowSpan=2>G.W.<BR>(kg)</TD> <TD align=middle rowSpan=2>Q’ty<BR>(pcs)</TD> <TD align=middle colSpan=3>Package Dimension (cm)</TD></TR> <TR> <TD align=middle bgColor=#efefef>L</TD> <TD align=middle bgColor=#efefef>W</TD> <TD align=middle bgColor=#efefef>H</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>25GZ0.8-15</TD> <TD align=middle>125</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>25</TD> <TD align=middle>15</TD> <TD align=middle>2</TD> <TD align=middle>0.8</TD> <TD align=middle>9</TD> <TD align=middle>36.6</TD> <TD align=middle>4</TD> <TD align=middle>50</TD> <TD align=middle>38.5</TD> <TD align=middle>26</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>25GZ1.6-15</TD> <TD align=middle>250</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>30</TD> <TD align=middle>15</TD> <TD align=middle>3</TD> <TD align=middle>1.6</TD> <TD align=middle>9</TD> <TD align=middle>20</TD> <TD align=middle>2</TD> <TD align=middle>42</TD> <TD align=middle>27</TD> <TD align=middle>27</TD></TR></TBODY></TABLE></P>

Water pump

2009-10-6 15:47:47

Hand pump

2009-10-6 15:47:47

]]><TABLE cellSpacing=0 cellPadding=0 width="100%" border=0> <TBODY> <TR> <TD align=left><SPAN class=re>Technical Data: </SPAN><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle rowSpan=2>Model</TD> <TD align=middle rowSpan=2>Power <BR>(w)</TD> <TD align=middle rowSpan=2>Voltage<BR>(v)</TD> <TD align=middle rowSpan=2>Frequ-ency<BR>(Hz)</TD> <TD align=middle rowSpan=2>Speed<BR>(r/min)</TD> <TD align=middle rowSpan=2>Hig- hest Head <BR>(m)</TD> <TD align=middle rowSpan=2>Rated Head <BR>(m)</TD> <TD align=middle rowSpan=2>Max. Cap-acity <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>Rated Capa-city <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>Suc-<BR>tion Head <BR>(m)</TD> <TD align=middle rowSpan=2>G.W.<BR>(kg)</TD> <TD align=middle rowSpan=2>Q’ty<BR>(pcs)</TD> <TD align=middle colSpan=3>Package Dimension (cm)</TD></TR> <TR> <TD align=middle bgColor=#efefef>L</TD> <TD align=middle bgColor=#efefef>W</TD> <TD align=middle bgColor=#efefef>H</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>25GZ1.2-15</TD> <TD align=middle>370</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>30</TD> <TD align=middle>15</TD> <TD align=middle>2.5</TD> <TD align=middle>1.2</TD> <TD align=middle>9</TD> <TD align=middle>26</TD> <TD align=middle>4</TD> <TD align=middle>57</TD> <TD align=middle>34.5</TD> <TD align=middle>26</TD></TR></TBODY></TABLE></TD></TR> <TR> <TD align=left><SPAN class=re>Installation Dimensions: </SPAN><BR><BR><SPAN class=re>Structure Chart:?</SPAN><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD></TR> <TR> <TD bgColor=#ffffff>1</TD> <TD bgColor=#ffffff>Copper pump casing </TD> <TD bgColor=#ffffff>5</TD> <TD bgColor=#ffffff>Ball bearing</TD> <TD bgColor=#ffffff>9</TD> <TD bgColor=#ffffff>Ball bearing</TD></TR> <TR> <TD bgColor=#ffffff>2</TD> <TD bgColor=#ffffff>Copper Impeller </TD> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>Motor housing</TD> <TD bgColor=#ffffff>10</TD> <TD bgColor=#ffffff>End-shield</TD></TR> <TR> <TD bgColor=#ffffff>3</TD> <TD bgColor=#ffffff>Mechanical seal </TD> <TD bgColor=#ffffff>7</TD> <TD bgColor=#ffffff>Rotor</TD> <TD bgColor=#ffffff>11</TD> <TD bgColor=#ffffff>Bolt</TD></TR> <TR> <TD bgColor=#ffffff>4</TD> <TD bgColor=#ffffff>Adaptor</TD> <TD bgColor=#ffffff>8</TD> <TD bgColor=#ffffff>Fan</TD> <TD bgColor=#ffffff>12</TD> <TD bgColor=#ffffff>Tie-rod</TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE>

Booster pumps

2009-10-6 15:47:47

]]><SPAN class=re>Technical Data: </SPAN><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle rowSpan=2>Model</TD> <TD align=middle rowSpan=2>Power <BR>(w)</TD> <TD align=middle rowSpan=2>Voltage<BR>(v)</TD> <TD align=middle rowSpan=2>Frequ-ency<BR>(Hz)</TD> <TD align=middle rowSpan=2>Speed<BR>(r/min)</TD> <TD align=middle rowSpan=2>Input & outlet Dia. <BR>(mm)</TD> <TD align=middle rowSpan=2>Hig- hest Head <BR>(m)</TD> <TD align=middle rowSpan=2>Rated Head <BR>(m)</TD> <TD align=middle rowSpan=2>Max. Cap-acity <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>Rated Capa-city <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>Suction<BR>Head<BR>(m)</TD> <TD align=middle rowSpan=2>G.W.<BR>(kg)</TD> <TD align=middle rowSpan=2>Q’ty<BR>(pcs)</TD> <TD align=middle colSpan=3>Package Dimen-<BR>sion (cm)</TD></TR> <TR> <TD align=middle bgColor=#efefef>L</TD> <TD align=middle bgColor=#efefef>W</TD> <TD align=middle bgColor=#efefef>H</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>CL15GZ-15</TD> <TD align=middle>120</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>15</TD> <TD align=middle>15</TD> <TD align=middle>10</TD> <TD align=middle>25</TD> <TD align=middle>10</TD> <TD align=middle>6</TD> <TD align=middle>19</TD> <TD align=middle>4</TD> <TD align=middle>30.5</TD> <TD align=middle>24.5</TD> <TD align=middle>32.5</TD></TR></TBODY></TABLE> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD></TR> <TR> <TD bgColor=#ffffff>1</TD> <TD bgColor=#ffffff>Steel housing </TD> <TD bgColor=#ffffff>7</TD> <TD bgColor=#ffffff>Automatic switch </TD> <TD bgColor=#ffffff>13</TD> <TD bgColor=#ffffff>Copper adaptor </TD></TR> <TR> <TD bgColor=#ffffff>2</TD> <TD bgColor=#ffffff>Ball bearing </TD> <TD bgColor=#ffffff>8</TD> <TD bgColor=#ffffff>Base bracket </TD> <TD bgColor=#ffffff>14</TD> <TD bgColor=#ffffff>Copper Impeller </TD></TR> <TR> <TD bgColor=#ffffff>3</TD> <TD bgColor=#ffffff>Stator (Coil winding) </TD> <TD bgColor=#ffffff>9</TD> <TD bgColor=#ffffff>End-shield</TD> <TD bgColor=#ffffff>15</TD> <TD bgColor=#ffffff>Coper pump casing </TD></TR> <TR> <TD bgColor=#ffffff>4</TD> <TD bgColor=#ffffff>Rotor</TD> <TD bgColor=#ffffff>10</TD> <TD bgColor=#ffffff>Tie-rod</TD> <TD bgColor=#ffffff>16</TD> <TD bgColor=#ffffff>Screw</TD></TR> <TR> <TD bgColor=#ffffff>5</TD> <TD bgColor=#ffffff>Front-shield</TD> <TD bgColor=#ffffff>11</TD> <TD bgColor=#ffffff>Gasket</TD> <TD bgColor=#ffffff>?</TD> <TD bgColor=#ffffff>?</TD></TR> <TR> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>Mechanical seal </TD> <TD bgColor=#ffffff>12</TD> <TD bgColor=#ffffff>Ball bearing </TD></TR></TBODY></TABLE>

Self-Priming Spraying Pumps

2009-10-6 15:47:47

]]><SPAN class=re>Technical Data: </SPAN><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle rowSpan=2>Model</TD> <TD align=middle rowSpan=2>Power <BR>(w)</TD> <TD align=middle rowSpan=2>Voltage<BR>(v)</TD> <TD align=middle rowSpan=2>Frequ-ency<BR>(Hz)</TD> <TD align=middle rowSpan=2>Speed<BR>(r/min)</TD> <TD align=middle rowSpan=2>Hig- hest Head <BR>(m)</TD> <TD align=middle rowSpan=2>Rated Head <BR>(m)</TD> <TD align=middle rowSpan=2>Max. Cap-acity <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>Rated Capa-city <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>Suction Head <BR>(m)</TD> <TD align=middle rowSpan=2>G.W.<BR>(kg)</TD> <TD align=middle rowSpan=2>Q’ty<BR>(pcs)</TD> <TD align=middle colSpan=3>Package Dimension (cm)</TD></TR> <TR> <TD align=middle bgColor=#efefef>L</TD> <TD align=middle bgColor=#efefef>W</TD> <TD align=middle bgColor=#efefef>H</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>25GZ1.5-16</TD> <TD align=middle>0.37</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>28</TD> <TD align=middle>16</TD> <TD align=middle>3</TD> <TD align=middle>1.5</TD> <TD align=middle>9</TD> <TD align=middle>16.5</TD> <TD align=middle>2</TD> <TD align=middle>48.5</TD> <TD align=middle>43</TD> <TD align=middle>25</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>25GZ2-20</TD> <TD align=middle>0.75</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>40</TD> <TD align=middle>20</TD> <TD align=middle>3</TD> <TD align=middle>2</TD> <TD align=middle>9</TD> <TD align=middle>22.5</TD> <TD align=middle>2</TD> <TD align=middle>48.5</TD> <TD align=middle>43</TD> <TD align=middle>25</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>25GZ3-20</TD> <TD align=middle>0.75</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>45</TD> <TD align=middle>20</TD> <TD align=middle>4</TD> <TD align=middle>3</TD> <TD align=middle>9</TD> <TD align=middle>31</TD> <TD align=middle>2</TD> <TD align=middle>48.5</TD> <TD align=middle>43</TD> <TD align=middle>25</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>25GZ3-25</TD> <TD align=middle>1.1</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>50</TD> <TD align=middle>25</TD> <TD align=middle>4</TD> <TD align=middle>3</TD> <TD align=middle>9</TD> <TD align=middle>32</TD> <TD align=middle>2</TD> <TD align=middle>48.5</TD> <TD align=middle>43</TD> <TD align=middle>25</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>25GZ3-30</TD> <TD align=middle>1.5</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>40</TD> <TD align=middle>30</TD> <TD align=middle>5</TD> <TD align=middle>3</TD> <TD align=middle>9</TD> <TD align=middle>19.5</TD> <TD align=middle>1</TD> <TD align=middle>57</TD> <TD align=middle>24</TD> <TD align=middle>25</TD></TR></TBODY></TABLE>

Beverage Pump

2009-10-6 15:47:47

]]><TABLE cellSpacing=0 cellPadding=0 width="100%" border=0> <TBODY> <TR> <TD align=left colSpan=2><SPAN class=re>Technical Data: </SPAN> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle rowSpan=2>Model</TD> <TD align=middle rowSpan=2>Power <BR>(w)</TD> <TD align=middle rowSpan=2>Voltage<BR>(v)</TD> <TD align=middle rowSpan=2>Frequ-ency<BR>(Hz)</TD> <TD align=middle rowSpan=2>Speed<BR>(r/min)</TD> <TD align=middle rowSpan=2>Input<BR>& <BR>Outlet Dia. </TD> <TD align=middle rowSpan=2>Hig- hest Head <BR>(m)</TD> <TD align=middle rowSpan=2>Rated Head <BR>(m)</TD> <TD align=middle rowSpan=2>Max. Cap-acity <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>Rated Capa<BR>-city <BR>(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>G.W.<BR>(kg)</TD> <TD align=middle rowSpan=2>Q’ty<BR>(pcs)</TD> <TD align=middle colSpan=3>Package Dimension<BR>(cm)</TD></TR> <TR> <TD align=middle bgColor=#efefef>L</TD> <TD align=middle bgColor=#efefef>W</TD> <TD align=middle bgColor=#efefef>H</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>CLY-5</TD> <TD align=middle>40</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>12</TD> <TD align=middle>5</TD> <TD align=middle>3</TD> <TD align=middle>30</TD> <TD align=middle>15</TD> <TD align=middle>27</TD> <TD align=middle>2</TD> <TD align=middle>49.5</TD> <TD align=middle>32.5</TD> <TD align=middle>43.8</TD></TR></TBODY></TABLE></TD></TR> <TR> <TD align=left colSpan=2><SPAN class=re>Installation Dimensions: </SPAN><BR><BR><SPAN class=re>Structure Chart: </SPAN><BR><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD></TR> <TR> <TD bgColor=#ffffff>1</TD> <TD bgColor=#ffffff>End-shield</TD> <TD bgColor=#ffffff>5</TD> <TD bgColor=#ffffff>Front-shield</TD> <TD bgColor=#ffffff>9</TD> <TD bgColor=#ffffff>Bolt</TD></TR> <TR> <TD bgColor=#ffffff>2</TD> <TD bgColor=#ffffff>Ball bearing </TD> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>Adaptor</TD> <TD bgColor=#ffffff>10</TD> <TD bgColor=#ffffff>Rotor</TD></TR> <TR> <TD bgColor=#ffffff>3</TD> <TD bgColor=#ffffff>Stator (Coil winding) </TD> <TD bgColor=#ffffff>7</TD> <TD bgColor=#ffffff>Impeller</TD> <TD bgColor=#ffffff>11</TD> <TD bgColor=#ffffff>Stirring paddle </TD></TR> <TR> <TD bgColor=#ffffff>4</TD> <TD bgColor=#ffffff>Ball bearing </TD> <TD bgColor=#ffffff>8</TD> <TD bgColor=#ffffff>Pump casing </TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE>

Cooling Cycle Pump

2009-10-6 15:47:47

]]><SPAN class=re>Technical Data: </SPAN><BR> <TABLE class=table_all cellSpacing=1 cellPadding=2 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle rowSpan=3>Model</TD> <TD align=middle rowSpan=3>Power<BR>(w)</TD> <TD align=middle rowSpan=3>Voltage<BR>(v)</TD> <TD align=middle rowSpan=3>Frequ-<BR>ency<BR>(Hz)</TD> <TD align=middle rowSpan=3>Speed<BR>(r/min)</TD> <TD align=middle rowSpan=3>High-<BR>est <BR>Head<BR>(m)</TD> <TD align=middle rowSpan=3>Rated Head<BR>(m)</TD> <TD align=middle rowSpan=3> <P>Max.<BR>Cap-acity<BR>(L/min)</P></TD> <TD align=middle rowSpan=3>Rated Cap-<BR>acity <BR>(L/min)</TD> <TD align=middle colSpan=5>(A??B)</TD> <TD colSpan=5>(C)</TD></TR> <TR bgColor=#333333> <TD align=middle bgColor=#efefef rowSpan=2>G.W.<BR>(kg)</TD> <TD align=middle bgColor=#efefef rowSpan=2>Q’ty<BR>(pcs)</TD> <TD align=middle bgColor=#efefef colSpan=3>Package <BR>Dimension<BR>(cm)</TD> <TD align=middle bgColor=#efefef rowSpan=2>G.W.<BR>(kg)</TD> <TD align=middle bgColor=#efefef rowSpan=2>Q’ty<BR>(pcs)</TD> <TD align=middle bgColor=#efefef colSpan=3>Package<BR>Dimension<BR>(cm)</TD></TR> <TR bgColor=#333333> <TD align=middle bgColor=#efefef>L</TD> <TD align=middle bgColor=#efefef>W</TD> <TD align=middle bgColor=#efefef>H</TD> <TD align=middle bgColor=#efefef>L</TD> <TD align=middle bgColor=#efefef>W</TD> <TD align=middle bgColor=#efefef>H</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>CB-5600</TD> <TD align=middle>40</TD> <TD align=middle>220</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>2.2</TD> <TD align=middle>1</TD> <TD align=middle>10</TD> <TD align=middle>7</TD> <TD align=middle>20</TD> <TD>20</TD> <TD>54</TD> <TD>43.5</TD> <TD>25.5</TD> <TD align=middle>12</TD> <TD align=middle>12</TD> <TD align=middle>48.5</TD> <TD align=middle>48.2</TD> <TD align=middle>26.3</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>CB-6600</TD> <TD align=middle>50</TD> <TD align=middle>220</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>2.4</TD> <TD align=middle>1.5</TD> <TD align=middle>12</TD> <TD align=middle>8</TD> <TD>21</TD> <TD>20</TD> <TD>54</TD> <TD>43.5</TD> <TD>25.5</TD> <TD align=middle>12.5</TD> <TD align=middle>12</TD> <TD>48.5</TD> <TD>48.2</TD> <TD>26.3</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>CB-7600</TD> <TD align=middle>60</TD> <TD align=middle>220</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>2.6</TD> <TD align=middle>1.5</TD> <TD align=middle>13</TD> <TD align=middle>9</TD> <TD>22</TD> <TD>20</TD> <TD>54</TD> <TD>43.5</TD> <TD>25.5</TD> <TD align=middle>13</TD> <TD align=middle>12</TD> <TD>48.5</TD> <TD>48.2</TD> <TD>26.3</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>CB-8600</TD> <TD align=middle>70</TD> <TD align=middle>220</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>2.8</TD> <TD align=middle>1.5</TD> <TD align=middle>15</TD> <TD align=middle>10</TD> <TD>23</TD> <TD>20</TD> <TD>54</TD> <TD>43.5</TD> <TD>25.5</TD> <TD align=middle>13.5</TD> <TD align=middle>12</TD> <TD>48.5</TD> <TD>48.2</TD> <TD>26.3</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>CB-9600</TD> <TD align=middle>80</TD> <TD align=middle>220</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>3.0</TD> <TD align=middle>1.5</TD> <TD align=middle>16</TD> <TD align=middle>11</TD> <TD>24</TD> <TD>20</TD> <TD>54</TD> <TD>43.5</TD> <TD>25.5</TD> <TD align=middle>14</TD> <TD align=middle>12</TD> <TD>48.5</TD> <TD>48.2</TD> <TD>26.3</TD></TR></TBODY></TABLE>

DC Oil Pumps

2009-10-6 15:47:47

]]><TABLE cellSpacing=0 cellPadding=0 width="100%" border=0> <TBODY> <TR> <TD align=left><SPAN class=re>Use and Features:</SPAN><BR>DC12V or 24V, have the vacuum suction function, set the positive and reverse run function; small volume, good performance, Big flow, High discharge height, Very convenient application on various locale, especial applicable to pumping oil liquid for the car or vehicle, more convenience for pumping the oil from the jerrican on gas station. </TD></TR> <TR> <TD align=left><SPAN class=re>Structure Chart: </SPAN><BR><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD></TR> <TR> <TD bgColor=#ffffff>1</TD> <TD bgColor=#ffffff>Cover of pump casing </TD> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>Positive/negative Switch </TD> <TD bgColor=#ffffff>11</TD> <TD bgColor=#ffffff>Fribt Cover </TD></TR> <TR> <TD bgColor=#ffffff>2</TD> <TD bgColor=#ffffff>Outer rotor </TD> <TD bgColor=#ffffff>7</TD> <TD bgColor=#ffffff>Handle</TD> <TD bgColor=#ffffff>12</TD> <TD bgColor=#ffffff>Carbon brush </TD></TR> <TR> <TD bgColor=#ffffff>3</TD> <TD bgColor=#ffffff>Seal</TD> <TD bgColor=#ffffff>8</TD> <TD bgColor=#ffffff>Ball bearing </TD> <TD bgColor=#ffffff>13</TD> <TD bgColor=#ffffff>Rotor </TD></TR> <TR> <TD bgColor=#ffffff>4</TD> <TD bgColor=#ffffff>Pump Body </TD> <TD bgColor=#ffffff>9</TD> <TD bgColor=#ffffff>Back cover </TD> <TD bgColor=#ffffff>14</TD> <TD bgColor=#ffffff>Pump Casing </TD></TR> <TR> <TD bgColor=#ffffff>5</TD> <TD bgColor=#ffffff>Mechanical Seal </TD> <TD bgColor=#ffffff>10</TD> <TD bgColor=#ffffff>Inner rotor </TD> <TD bgColor=#ffffff>15</TD> <TD bgColor=#ffffff>Fuse</TD></TR></TBODY></TABLE><SPAN class=re>Technical Data: </SPAN><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle>Model</TD> <TD align=middle>Power <BR>(w)</TD> <TD align=middle>Voltage<BR>DC(v)</TD> <TD align=middle>Speed<BR>(r/min)</TD> <TD align=middle>Head <BR>(m)</TD> <TD align=middle>Suction Head <BR>(m)</TD> <TD align=middle>Capacity <BR>(L/min)</TD> <TD align=middle>G.W.<BR>(kg)</TD> <TD align=middle>Q’ty<BR>(pcs)</TD> <TD align=middle>Package Dimension (cm)</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>WYB-25</TD> <TD align=middle>370</TD> <TD align=middle>12??24</TD> <TD align=middle>5800</TD> <TD align=middle>25</TD> <TD align=middle>9</TD> <TD align=middle>65</TD> <TD align=middle>34</TD> <TD align=middle>8</TD> <TD align=middle>53??6.5??7</TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE>

Petrol Water Pump

2009-10-6 15:47:47

]]><TABLE cellSpacing=0 cellPadding=0 width="100%" border=0> <TBODY> <TR> <TD align=left><SPAN class=re>Use and Features:</SPAN><BR><BR>DC12V or 24V, have the vacuum suction function; low noise, corrosion resistance; small volume, Heigh Suction, High pressure, especial apply to the reverse osmosis water purification system; Water Treatment Equipment; Matching for electric sprayer; Water coolant for the tyre of the car In summer; loading liquid for Chemical and Measurement; sanitation, Environmental protection, printing etc and air pumping for other Industrial equipment or liquid trasportation purposes. </TD></TR> <TR> <TD align=left><SPAN class=re>Structure Chart: </SPAN><BR><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD> <TD bgColor=#efefef><STRONG>N.</STRONG></TD> <TD bgColor=#efefef><STRONG>Description</STRONG></TD></TR> <TR> <TD bgColor=#ffffff>1</TD> <TD bgColor=#ffffff>Water outlet </TD> <TD bgColor=#ffffff>7</TD> <TD bgColor=#ffffff>Cover of bearing </TD> <TD bgColor=#ffffff>13</TD> <TD bgColor=#ffffff>Ball bearing(202#) </TD></TR> <TR> <TD bgColor=#ffffff>2</TD> <TD bgColor=#ffffff>Pump body </TD> <TD bgColor=#ffffff>8</TD> <TD bgColor=#ffffff>Front Cover </TD> <TD bgColor=#ffffff>14</TD> <TD bgColor=#ffffff>linker</TD></TR> <TR> <TD bgColor=#ffffff>3</TD> <TD bgColor=#ffffff>Pump cavity </TD> <TD bgColor=#ffffff>9</TD> <TD bgColor=#ffffff>Pump Csaing </TD> <TD bgColor=#ffffff>15</TD> <TD bgColor=#ffffff>Ball bearing(680#)</TD></TR> <TR> <TD bgColor=#ffffff>4</TD> <TD bgColor=#ffffff>Seal</TD> <TD bgColor=#ffffff>10</TD> <TD bgColor=#ffffff>Rotor</TD> <TD bgColor=#ffffff>16</TD> <TD bgColor=#ffffff>Bracket board </TD></TR> <TR> <TD bgColor=#ffffff>5</TD> <TD bgColor=#ffffff>Adaptor</TD> <TD bgColor=#ffffff>11</TD> <TD bgColor=#ffffff>Deflate screw </TD> <TD bgColor=#ffffff>17</TD> <TD bgColor=#ffffff>Back Cover </TD></TR> <TR> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>Pedestal</TD> <TD bgColor=#ffffff>12</TD> <TD bgColor=#ffffff>Water suction valve </TD> <TD bgColor=#ffffff></TD> <TD bgColor=#ffffff></TD></TR></TBODY></TABLE><SPAN class=re>Technical Data: </SPAN><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle>Model</TD> <TD align=middle>Power <BR>(w)</TD> <TD align=middle>Voltage<BR>DC(v)</TD> <TD align=middle>Speed<BR>(r/min)</TD> <TD align=middle>Head <BR>(m)</TD> <TD align=middle>Suction Head <BR>(m)</TD> <TD align=middle>Capacity <BR>(L/min)</TD> <TD align=middle>G.W.<BR>(kg)</TD> <TD align=middle>Q’ty<BR>(pcs)</TD> <TD align=middle>Package Dimension (cm)</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>WFB-45</TD> <TD align=middle>50</TD> <TD align=middle>12??24</TD> <TD align=middle>3250</TD> <TD align=middle>45</TD> <TD align=middle>9</TD> <TD align=middle>4</TD> <TD align=middle>20.5</TD> <TD align=middle>10</TD> <TD align=middle>56??5??4</TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE>

Massage Surf Circulating Pumps

2009-10-6 15:47:47

]]><SPAN class=re>Technical Data: </SPAN><BR> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle rowSpan=2>Model</TD> <TD align=middle rowSpan=2>Power <BR>(w)</TD> <TD align=middle rowSpan=2>Voltage<BR>(v)</TD> <TD align=middle rowSpan=2>Frequ-ency<BR>(Hz)</TD> <TD align=middle rowSpan=2>Speed<BR>(r/min)</TD> <TD align=middle rowSpan=2>Input & Outlet<BR>?Dia. </TD> <TD align=middle rowSpan=2>Hig- <BR>hest Head <BR>(m)</TD> <TD align=middle rowSpan=2>Rated<BR>Head <BR>(m)</TD> <TD align=middle rowSpan=2>Max.<BR>Cap-<BR>acity(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>Rated<BR>Capa-<BR>city(m<SUP>3</SUP>/h)</TD> <TD align=middle rowSpan=2>G.W.<BR>(kg)</TD> <TD align=middle rowSpan=2>Q’ty<BR>(pcs)</TD> <TD align=middle colSpan=3>Package<BR>Dimension<BR>(cm)</TD></TR> <TR> <TD align=middle bgColor=#efefef>L</TD> <TD align=middle bgColor=#efefef>W</TD> <TD align=middle bgColor=#efefef>H</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>50DX-10</TD> <TD align=middle>0.55</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>50</TD> <TD align=middle>8</TD> <TD align=middle>5</TD> <TD align=middle>8</TD> <TD align=middle>5</TD> <TD align=middle>20</TD> <TD align=middle>4</TD> <TD align=middle>35.5</TD> <TD align=middle>28</TD> <TD align=middle>39</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>50DX-10</TD> <TD align=middle>0.55</TD> <TD align=middle>110~120</TD> <TD align=middle>60</TD> <TD align=middle>3360</TD> <TD align=middle>50</TD> <TD align=middle>11</TD> <TD align=middle>5</TD> <TD align=middle>10</TD> <TD align=middle>6</TD> <TD align=middle>20</TD> <TD align=middle>4</TD> <TD align=middle>35.5</TD> <TD align=middle>28</TD> <TD align=middle>39</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>50DX-15</TD> <TD align=middle>0.75</TD> <TD align=middle>220~240</TD> <TD align=middle>50</TD> <TD align=middle>2860</TD> <TD align=middle>50</TD> <TD align=middle>10</TD> <TD align=middle>5</TD> <TD align=middle>12</TD> <TD align=middle>8</TD> <TD align=middle>22</TD> <TD align=middle>4</TD> <TD align=middle>36.5</TD> <TD align=middle>28</TD> <TD align=middle>39</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle>50DX-15</TD> <TD align=middle>0.75</TD> <TD align=middle>110~120</TD> <TD align=middle>60</TD> <TD align=middle>3360</TD> <TD align=middle>50</TD> <TD align=middle>13</TD> <TD align=middle>5</TD> <TD align=middle>15</TD> <TD align=middle>10</TD> <TD align=middle>22</TD> <TD align=middle>4</TD> <TD align=middle>36.5</TD> <TD align=middle>28</TD> <TD align=middle>39</TD></TR></TBODY></TABLE>

Circulating Pumps

2009-7-3 16:09:55

]]><TABLE cellSpacing=0 cellPadding=0 width="100%" border=0> <TBODY> <TR> <TD style="PADDING-BOTTOM: 6px; PADDING-TOP: 6px" colSpan=2> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle>Model</TD> <TD align=middle>Max.Power</TD> <TD align=middle>Rated Power </TD> <TD align=middle>Min.<BR>Power</TD> <TD align=middle>Dia.<BR></TD> <TD align=middle>Voltage</TD> <TD align=middle>Frequercy</TD> <TD align=middle>G.W</TD> <TD align=middle>Q’ty</TD> <TD align=middle>Package Dimension</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle><STRONG>25PBG-8-N</STRONG></TD> <TD align=middle>220W</TD> <TD align=middle>180W</TD> <TD align=middle>115W</TD> <TD align=middle>25mm(<FONT style="FONT-SIZE: 9px">1"</FONT>)</TD> <TD align=middle>220~240V</TD> <TD align=middle>50Hz</TD> <TD align=middle>19.5kg</TD> <TD align=middle>4 Pcs </TD> <TD align=middle>34.8*30.8*19.8cm</TD></TR></TBODY></TABLE></TD></TR> <TR> <TD width="57%"> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#ffffff>Positice</TD> <TD bgColor=#ffffff>Hightest Head <BR>(m)</TD> <TD bgColor=#ffffff>Max. Capacity <BR>(L/min)</TD> <TD bgColor=#ffffff>Speed<BR>(r/min)</TD></TR> <TR> <TD bgColor=#ffffff>III</TD> <TD bgColor=#ffffff>8</TD> <TD bgColor=#ffffff>80</TD> <TD bgColor=#ffffff>2410</TD></TR> <TR> <TD bgColor=#ffffff>II</TD> <TD bgColor=#ffffff>7</TD> <TD bgColor=#ffffff>65</TD> <TD bgColor=#ffffff>2080</TD></TR> <TR> <TD bgColor=#ffffff>I</TD> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>40</TD> <TD bgColor=#ffffff>1680</TD></TR></TBODY></TABLE></TD> <TD width="43%">?</TD></TR> <TR> <TD style="PADDING-BOTTOM: 6px; PADDING-TOP: 6px" colSpan=2> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR align=middle bgColor=#efefef> <TD align=middle>Model</TD> <TD align=middle>Max.Power</TD> <TD align=middle>Rated Power </TD> <TD align=middle>Min.<BR>Power</TD> <TD align=middle>Dia.<BR></TD> <TD align=middle>Voltage</TD> <TD align=middle>Frequercy</TD> <TD align=middle>G.W</TD> <TD align=middle>Q’ty</TD> <TD align=middle>Package Dimension</TD></TR> <TR align=middle bgColor=#ffffff> <TD align=middle><STRONG>40PBG-8-N</STRONG></TD> <TD align=middle>220W</TD> <TD align=middle>180W</TD> <TD align=middle>115W</TD> <TD align=middle>40mm(1<FONT style="FONT-SIZE: 9px">1/2"</FONT>)</TD> <TD align=middle>220~240V</TD> <TD align=middle>50Hz</TD> <TD align=middle>20kg</TD> <TD align=middle>4 Pcs </TD> <TD align=middle>34.8*30.8*19.8cm</TD></TR></TBODY></TABLE></TD></TR> <TR> <TD> <TABLE class=table_all cellSpacing=1 cellPadding=3 width="100%" border=0> <TBODY> <TR> <TD bgColor=#ffffff>Positice</TD> <TD bgColor=#ffffff>Hightest Head <BR>(m)</TD> <TD bgColor=#ffffff>Max. Capacity <BR>(L/min)</TD> <TD bgColor=#ffffff>Speed<BR>(r/min)</TD></TR> <TR> <TD bgColor=#ffffff>III</TD> <TD bgColor=#ffffff>8</TD> <TD bgColor=#ffffff>80</TD> <TD bgColor=#ffffff>2410</TD></TR> <TR> <TD bgColor=#ffffff>II</TD> <TD bgColor=#ffffff>7</TD> <TD bgColor=#ffffff>65</TD> <TD bgColor=#ffffff>2080</TD></TR> <TR> <TD bgColor=#ffffff>I</TD> <TD bgColor=#ffffff>6</TD> <TD bgColor=#ffffff>40</TD> <TD bgColor=#ffffff>1680</TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE>

Automatic Boosing Pump

2009-2-24 16:58:54

]]>

N.	Description	N.	Description	N.	Description
1	Terminal box	6	Seal ring	11	Rotor
2	Stator (Coil winding)	7	Automatic-controling device	12	Fix board
3	Protection cover	8	Pump casing	13	Impeller
4	Steel shielding	9	Water-sealing bolt	?	?
5	Ceramic bearing	10	Motor Housing	?	?

Model	Max.Power (w)	Voltage (v)	Frequency (Hz)	Input&Outlet Dia. (mm)(in)	Speed (r/min)	Highest Head (m	Max.Capacity (L/min)	G.W. (kg)	Q’ty (pcs)	Package Dimension (cm)
15PBG-7-N	90	220-240	50	15(3/4)"	2800	7	30	23	8	28.82831.6
15PBG-9-N	120	220-240	50	15(3/4)"	2800	9	40	26	8	28.82831

Circulating Pump

2009-2-25 8:13:53

]]>

Model	Max.Power	Rated Power	Min. Power	Dia.	Voltage	Frequercy	G.W	Q'ty	Package Dimension
25PBG-8-N	220W	180W	115W	25mm(1")	220~240V	50Hz	19.5kg	4 Pcs	34.830.819.8cm

Circulating Pumps

2009-4-10 13:19:15

]]>

Model	Max.Power	Rated Power	Min. Power	Dia.	Voltage	Frequercy	G.W	Q’ty	Package Dimension
25PBG-8-N	220W	180W	115W	25mm(1")	220~240V	50Hz	19.5kg	4 Pcs	34.830.819.8cm

Positice	Hightest Head (m)	Max. Capacity (L/min)	Speed (r/min)
III	8	80	2410
II	7	65	2080
I	6	40	1680

Model	Max.Power	Rated Power	Min. Power	Dia.	Voltage	Frequercy	G.W	Q’ty	Package Dimension
40PBG-8-N	220W	180W	115W	40mm(11/2")	220~240V	50Hz	20kg	4 Pcs	34.830.819.8cm

Positice	Hightest Head (m)	Max. Capacity (L/min)	Speed (r/min)
III	8	80	2410
II	7	65	2080
I	6	40	1680

Circulation pump

2009-4-10 13:23:22

]]>

Technical Data:

Model	Max.Power	Rated Power	Min. Power	Dia.	Voltage	Frequercy	G.W	Qty	Package Dimension
25PBG-11-N	150W	120W	80W	25mm(1)	220~240V	50Hz	19kg	4 Pcs	38.830.817.5cm

Positice	Hightest Head (m)	Max. Capacity (L/min)	Speed (r/min)
III	11	35	2410
II	8	25	2080
I	5	18	1680

Model	Max.Power	Rated Power	Min. Power	Dia.	Voltage	Frequercy	G.W	Qty	Package Dimension
25PBG-13-N	280W	250W	120W	15mm(3/4")	220~240V	50Hz	25kg	4 Pcs	38.833.220.3cm

Circulation Pumps

2009-4-10 13:22:11

]]>

Model	Max.Power	Rated Power	Min. Power	Dia.	Voltage	Frequercy	G.W	Q??ty	Package Dimension
25PBG-6-N(C)	100W	90W	55W	25mm(1)	220~240V	50Hz	24kg	8 Pcs	38.528.528.5cm

Positice	Hightest Head (m)	Max. Capacity (L/min)	Speed (r/min)
III	6	70	2410
II	5	55	2080
I	4	30	1680

Model	Max.Power	Rated Power	Min. Power	Dia.	Voltage	Frequercy	G.W	Q??ty	Package Dimension
40PBG-6-N?(C)	100W	90W	55W	40mm(11/2")	220~240V	50Hz	24.5kg	8 Pcs	38.528.528.5cm

Positice	Hightest Head (m)	Max. Capacity (L/min)	Speed (r/min)
III	6	80	2410
II	5	65	2080
I	4	40	1680

High Pressure Pump

2009-2-24 16:51:18

]]>

Model	Power (w)	Volt age (v)	Freq-ency (Hz)	Speed (r/min)	Input & outlet Dia. (mm)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	Suct- ion Head (m)	G.W. (kg)	Q’ty (pcs)	Package Dime- nsion (cm)
Model	Power (w)	Volt age (v)	Freq-ency (Hz)	Speed (r/min)	Input & outlet Dia. (mm)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	Suct- ion Head (m)	G.W. (kg)	Q’ty (pcs)	L	W	H
20GZ0.5-14	180	220	50	2860	20	22	14	1.5	0.5	6	20	2	38	35.5	31
20GZ0.8-15	370	220	50	2860	20	30	15	1.8	0.8	6	21	2	38	35.5	34
25GZ1.2-25	550	220	50	2860	25	45	25	2.8	1.2	6	31	2	41.5	41.5	35.5
40GZ1.2-25	750	220	50	2860	40	50	25	2.8	1.2	6	39	2	42	40	40

Self-Priming Pump

2009-2-24 16:51:38

]]>

Features:
Equiped with self-sucking function, the pump has high suction lift, small volumn, With pressure switch and pressure pot, it can be used as automatic pump.
Main use:
It can suck water from 9 meter deepth, boost to apply water for familys, hotels, canteens, high buildings, water towers, and solar water heaters, suck water from wells and pools, boost to offer water to industrial equipments, irrigate gardens, and wash cars.

Technical Data:

Model	Power (w)	Volt- age (v)	Frequ-ency (Hz)	Speed (r/min)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa -city (m³/h)	Suct- ion Head (m)	G.W. (kg)	Q’ty (pcs)	Package Dimension (cm)
Model	Power (w)	Volt- age (v)	Frequ-ency (Hz)	Speed (r/min)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa -city (m³/h)	Suct- ion Head (m)	G.W. (kg)	Q’ty (pcs)	L	W	H
25GZ0.8-15	125	220~240	50	2860	25	15	2	0.8	9	36.6	4	50	38.5	26
25GZ1.6-15	250	220~240	50	2860	30	15	3	1.6	9	20	2	42	27	27

Self-Priming Pump

2009-4-10 13:18:59

]]>Features & Purpose:
The pujp is made of copper material. Refined stainless steel motor casing, stainless steel motor shaft, copper impeller, are corrosion-resistant, which keep water much more sanitary and delicate apperance. With automatic-controlling switch or pressure switch and pressure pot, it can be used as automatic pump. The pump motor has air-cooling device inside and is installed the thermal-protector, which can potector motor awsy from damage effectively.

Technical Data:

Model	Power (w)	Voltage (v)	Frequ-ency (Hz)	Speed (r/min)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	Suc- tion Head (m)	G.W. (kg)	Q’ty (pcs)	Package Dimension (cm)
												L	W	H
25GZ1.2-15	370	220~240	50	2860	30	15	2.5	1.2	9	26	4	57	34.5	26

Self-Priming Pumps

2009-4-10 13:19:07

]]>Technical Data:

Model	Power (w)	Voltage (v)	Frequ-ency (Hz)	Speed (r/min)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	Suction Head (m)	G.W. (kg)	Q’ty (pcs)	Package Dimension (cm)
Model	Power (w)	Voltage (v)	Frequ-ency (Hz)	Speed (r/min)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	Suction Head (m)	G.W. (kg)	Q’ty (pcs)	L	W	H
25GZ1.5-16	0.37	220~240	50	2860	28	16	3	1.5	9	16.5	2	48.5	43	25
25GZ2-20	0.75	220~240	50	2860	40	20	3	2	9	22.5	2	48.5	43	25
25GZ3-20	0.75	220~240	50	2860	45	20	4	3	9	31	2	48.5	43	25
25GZ3-25	1.1	220~240	50	2860	50	25	4	3	9	32	2	48.5	43	25
25GZ3-30	1.5	220~240	50	2860	40	30	5	3	9	19.5	1	57	24	25

Water pump

2009-2-24 16:48:40

]]>Technical Data:

Model	Power (w)	Voltage (v)	Frequ-ency (Hz)	Speed (r/min)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	Suc- tion Head (m)	G.W. (kg)	Q’ty (pcs)	Package Dime- nsion (cm)
Model	Power (w)	Voltage (v)	Frequ-ency (Hz)	Speed (r/min)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	Suc- tion Head (m)	G.W. (kg)	Q’ty (pcs)	L	W	H
25GZ1.2-15	370	220~240	50	2860	30	15	2.5	1.2	9	38	4	57	34.5	26
25GZ1.5-15	550	220~240	50	2860	35	15	3	1.5	9	27	2	41	34	30
25GZ1.5-20	750	220~240	50	2860	45	20	4	1.5	9	29	2	41	34	30

Beverage Pump

2009-4-10 13:21:57

]]>

Technical Data:

Model	Power (w)	Voltage (v)	Frequ-ency (Hz)	Speed (r/min)	Input & Outlet Dia.	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa -city (m³/h)	G.W. (kg)	Q’ty (pcs)	Package Dimension (cm)
												L	W	H
CLY-5	40	220~240	50	2860	12	5	3	30	15	27	2	49.5	32.5	43.8

Installation Dimensions:

Structure Chart:

N.	Description	N.	Description	N.	Description
1	End-shield	5	Front-shield	9	Bolt
2	Ball bearing	6	Adaptor	10	Rotor
3	Stator (Coil winding)	7	Impeller	11	Stirring paddle
4	Ball bearing	8	Pump casing

Cooling Cycle Pump

2009-4-10 13:29:49

]]>Technical Data:

Model	Power (w)	Voltage (v)	Frequ- ency (Hz)	Speed (r/min)	High- est Head (m)	Rated Head (m)	Max. Cap-acity (L/min)	Rated Cap- acity (L/min)	(A??B)					(C)
									G.W. (kg)	Q’ty (pcs)	Package Dimension (cm)			G.W. (kg)	Q’ty (pcs)	Package Dimension (cm)
									G.W. (kg)	Q’ty (pcs)	L	W	H	G.W. (kg)	Q’ty (pcs)	L	W	H
CB-5600	40	220	50	2860	2.2	1	10	7	20	20	54	43.5	25.5	12	12	48.5	48.2	26.3
CB-6600	50	220	50	2860	2.4	1.5	12	8	21	20	54	43.5	25.5	12.5	12	48.5	48.2	26.3
CB-7600	60	220	50	2860	2.6	1.5	13	9	22	20	54	43.5	25.5	13	12	48.5	48.2	26.3
CB-8600	70	220	50	2860	2.8	1.5	15	10	23	20	54	43.5	25.5	13.5	12	48.5	48.2	26.3
CB-9600	80	220	50	2860	3.0	1.5	16	11	24	20	54	43.5	25.5	14	12	48.5	48.2	26.3

DC Oil Pumps

2009-2-25 8:13:22

]]>

Use and Features:
DC12V or 24V, have the vacuum suction function, set the positive and reverse run function; small volume, good performance, Big flow, High discharge height, Very convenient application on various locale, especial applicable to pumping oil liquid for the car or vehicle, more convenience for pumping the oil from the jerrican on gas station.

Structure Chart:

Technical Data:

Model	Power (w)	Voltage DC(v)	Speed (r/min)	Head (m)	Suction Head (m)	Capacity (L/min)	G.W. (kg)	Q’ty (pcs)	Package Dimension (cm)
WYB-25	370	12??24	5800	25	9	65	34	8	53??6.5??7

Diaphragm Pump(water pump)

2009-4-10 13:24:02

]]>

Structure Chart:

N.	Description	N.	Description	N.	Description
1	Water outlet	7	Cover of bearing	13	Ball bearing(202#)
2	Pump body	8	Front Cover	14	linker
3	Pump cavity	9	Pump Csaing	15	Ball bearing(680#)
4	Seal	10	Rotor	16	Bracket board
5	Adaptor	11	Deflate screw	17	Back Cover
6	Pedestal	12	Water suction valve	?	?

Technical Data:

Model	Power (w)	Voltage DC(v)	Speed (r/min)	Head (m)	Suction Head (m)	Capacity (L/min)	G.W. (kg)	Q’ty (pcs)	Package Dimension (cm)
WFB-45	50	12??24	3250	45	9	4	20.5	10	56??5??4

Magnetic drive pump(water pump)

2009-4-10 13:18:33

]]>

8CQ-2/10CQ-3/15CQ-4

Features:
Model CQ magnetic drive pump(magnetic pump for short)is a new product that applies operating principle of permanent magnetic coupling to centrifugal pump,it features rational design,advanced technique, full sealing without leakage and corrosion resistance, its performance is up to advanced level of similar products in the world.
Upper magnetic drive pump uses gasket type seal instead of dynamic seal,so flow passage parts of the pump are completely sealed, thus running, emitting, dripping and leaking problems that are inevitable to mechanical seal of other pumps have been solved thoroughly. Magnetic drive pump adopts corrosion resistant, high strength engineering plastics,corundum ceramics and stainless steel etc as raw materials, therefore, it has good corrosion resistance,and prevents the coneyed medium from contamination.

Main use:
Magnetic drive pump features compact structure,good-looking appearance, small size,low noise,reliable operation, convenient usage and maintenance,may be used widely for pumping acid, alkaline liquors, oils, rare and valuable solutions, venom,volatile liquids in chemical engineering, pharmaceutical, petroleum, electroplating, food, film photo developing and printing, scientific research institution, national defense industry etc units;as wellas an auxiliary equipment for circulating water equipment, auxiliary equipment for filter.Especially for pumping of leaky, inflammable and explosive liquids, this pump is more ideal.

Massage Surf Circulating Pumps

2009-2-24 16:56:53

]]>Features:
This pump adopts inner air cooling design, enables heat dispersion performance of the motor to be more superior, thereby extends service life of motor. The motor is equipped with thermal protector inside, which ensures motor not to be damaged. Use manual press type pneumatic plant to coutrol pump switch, which effectively prevents electric leakage caused by water entering switch or high humidity of air, it has strong safety performance. Pump body adopts acid and alkali proof, corrosion proof material, water utilization is more sanitary. Motor shaft is isolated from liquid thoroughly, which prevents rust from influencing seal performance, the greatest merit is that water is absolutely free of electricity even the motor leaks electricity, thereby it ensures safer operation.

Main use:
This pump is especially suitable for surf massage in shower house and surf auxiliary of footbath massage chair, since flow of this pump is extraordinarily large, it is also suitable for water supply of pool, irrigation of farmland, delivery of beverage, chemialc engineering and petroleum pipe line auxiliaries

Pipe pump

2009-4-10 13:21:45

]]>

Model	Max.Power	Rated Power	Min. Power	Dia.	Voltage	Frequercy	G.W	Q’ty	Package Dimension
25PBG-6-N(B)	120W	90W	60W	25mm(1??)	220~240V	50Hz	25kg	8 Pcs	28.82833.6cm

Positice	Hightest Head (m)	Max. Capacity (L/min)	Speed (r/min)
III	6	70	2410
II	4	45	2080
I	3	30	1680

Model	Max.Power	Rated Power	Min. Power	Dia.	Voltage	Frequercy	G.W	Q’ty	Package Dimension
40PBG-6-N(B)	120W	90W	60W	25mm(11/2")	220~240V	50Hz	26kg	8 Pcs	28.82833.6cm

Positice	Hightest Head (m)	Max. Capacity (L/min)	Speed (r/min)
III	6	80	2410
II	4	55	2080
I	3	35	1680

Submersible Pump

2009-2-25 8:13:43

]]>

Mechanical seal is not required, thus completely solve pump leadking, Avoid motor burn or accident caused electrocutions, therefore very safely; adopt to the stainless steel motor shaft, graphite bearing, water cycle between stator and rotaor, Not only for cooling, also can be used for bearing lubrication, completely solved the noise problem in working. advanced scientific design, Normal continuous use for 30,000 hours Trouble-free and maintenance-free. Set overload, and the water shortage automatic shutdown protection; the pump's shell used the stainless steel or corrosion-resistant materials never rust. more sanitary in water use; High discharge height, big flow apply to the Agricultural irrigation and pumping; the Industrial liquid pumping and drainage; Family, Eatery, Hotel Water Usage etc.

Model	Rated Power (w)	Voltage (v)	Frequ-ency (Hz)	Speed (r/min)	Pipe size (mm)(in)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	G.W. (kg)	Q'ty (pcs)	Package Dimension (cm)
Model	Rated Power (w)	Voltage (v)	Frequ-ency (Hz)	Speed (r/min)	Pipe size (mm)(in)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	G.W. (kg)	Q'ty (pcs)	L	W	H
PB-QDX2-12-0.37	0.37	220	50	2860	25/1"	18	12	4	2	10	2	41.8	21.5	34.5
PB-QDX3-18-0.55	0.55	220	50	2860	25/1"	25	18	6	3	12	2	41.8	21.5	34.5
PB-QDX4-22-0.75	0.75	220	50	2860	25/1"	30	22	8	4	14	2	41.8	21.5	34.5

Domestic booster pumps

2009-4-10 13:30:05

]]>

Technical Data:

Model	Power (w)	Voltage (v)	Frequ-ency (Hz)	Speed (r/min)	Input & outlet Dia. (mm)(in)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	G.W. (kg)	Q??ty (pcs)	Package Dimension (cm)
Model	Power (w)	Voltage (v)	Frequ-ency (Hz)	Speed (r/min)	Input & outlet Dia. (mm)(in)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	G.W. (kg)	Q??ty (pcs)	L	W	H
CL15G-10	90	220~240	50	2860	15	10	6	20	8	26	8	42.8	32	27.5
CL15G-15	120	220~240	50	2860	15	15	10	25	10	17	4	30.5	24.5	32.5

Family booster pump

2009-2-25 8:11:28

]]>Technical Data:

Model	Power (w)	Voltage (v)	Frequ-ency (Hz)	Speed (r/min)	Input & outlet Dia. (mm)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	G.W. (kg)	Q’ty (pcs)	Package Dime- nsion (cm)
Model	Power (w)	Voltage (v)	Frequ-ency (Hz)	Speed (r/min)	Input & outlet Dia. (mm)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	G.W. (kg)	Q’ty (pcs)	L	W	H
CL18GZ-16	200	220~240	50	2860	18	16	10	25	10	22	4	39.6	25	34
CL18G-18	250	220~240	50	2860	18	18	10	30	12	24	4	39.6	25	34

N.	Description	N.	Description	N.	Description
1	Fan cover	7	Copper Impeller	13	Front-shield
2	End-shield	8	Automatic switch	14	Coppet adaptor
3	Ball bearing			15	Mechanical seal
4	Stator (Coil winding)			16	Copper pump casing
5	Ball bering			?	?
6	Bolt			?	?

Solar water pumps

2009-2-24 16:52:18

]]>

Features:
The automatic switch adopts electronics theory, controlled by water current. The pump boosts pressure automatically when the tap is on, and turned off when the tap is off. It is used conveniently, and also saves power. Its copper pump body, copper impeller and stainless steel shaft are corrosion-resistant, stainless. The whole pump is sealed well and the conveyed water will be sanitary. Its total suction lift is high. Flow rate is large. It starts well, swithches sensitively and automatically, produces low noise. It also is designed to be low temperature, small volumn, delicate appereance and long-working time.
Main use:
This pump absolutely solves the lit fire properly of shower owing to the lower pressure and unreliable pressure. When the tap water is of low pressure, the pump can boost pressure. It can also boost pressure for solar water heaters, boost pressure and circulate water for industrial equipments, and increas oxygen for rearing ponds and fish tanks. GR hot-water pumps boost pressure and circulate hot water for boilers besides above using. GZ best feature is that it can suck tap water from one or two floor below directly. So it compeletely solves the problem that the higher floors don’t have water while the lower floors have.

Booster pumps

2009-4-10 13:18:49

]]>Technical Data:

Model	Power (w)	Voltage (v)	Frequ-ency (Hz)	Speed (r/min)	Input & outlet Dia. (mm)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	Suction Head (m)	G.W. (kg)	Q’ty (pcs)	Package Dimen- sion (cm)
													L	W	H
CL15GZ-15	120	220~240	50	2860	15	15	10	25	10	6	19	4	30.5	24.5	32.5

N.	Description	N.	Description	N.	Description
1	Steel housing	7	Automatic switch	13	Copper adaptor
2	Ball bearing	8	Base bracket	14	Copper Impeller
3	Stator (Coil winding)	9	End-shield	15	Coper pump casing
4	Rotor	10	Tie-rod	16	Screw
5	Front-shield	11	Gasket	?	?
6	Mechanical seal	12	Ball bearing

Domestic Boosting Pump

2009-3-9 9:08:47

]]>Technical Data:

Model	Power (w)	Voltage (v)	Frequ-ency (Hz)	Speed (r/min)	Input & outlet Dia. (mm)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	G.W. (kg)	Q??ty (pcs)	Package Dimen- sion (cm)
Model	Power (w)	Voltage (v)	Frequ-ency (Hz)	Speed (r/min)	Input & outlet Dia. (mm)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	G.W. (kg)	Q??ty (pcs)	L	W	H
CL15GR-10	90	220~240	50	2860	15	10	6	20	8	26	8	42.8	32	27.5
CL15GR-15	120	220~240	50	2860	15	15	10	25	10	18	4	30.5	24.5	32.5

N.	Description	N.	Description	N.	Description
1	Fan cover	7	Bolt	13	Rotor
2	End-shield	8	Copper Impeller	14	Front-shield
3	Ball bearing	9	Automatic switch	15	Coppet adaptor
4	Stator (Coil winding)	10	Bolt	16	Mechanical seal
5	Ball bering	11	Fan	17	Copper pump casing
6	Thermal insulation ring	12	Base bracket

High Pressure Pump

2009-2-25 8:11:47

]]>

Model	Power (w)	Volt age (v)	Freq-ency (Hz)	Speed (r/min)	Input & outlet Dia. (mm)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	Suct- ion Head (m)	G.W. (kg)	Q’ty (pcs)	Package Dime- nsion (cm)
Model	Power (w)	Volt age (v)	Freq-ency (Hz)	Speed (r/min)	Input & outlet Dia. (mm)	Hig- hest Head (m)	Rated Head (m)	Max. Cap-acity (m³/h)	Rated Capa-city (m³/h)	Suct- ion Head (m)	G.W. (kg)	Q’ty (pcs)	L	W	H
20GZ0.5-14	180	220	50	2860	20	22	14	1.5	0.5	6	20	2	38	35.5	31
20GZ0.8-15	370	220	50	2860	20	30	15	1.8	0.8	6	21	2	38	35.5	34
25GZ1.2-25	550	220	50	2860	25	45	25	2.8	1.2	6	31	2	41.5	41.5	35.5
40GZ1.2-25	750	220	50	2860	40	50	25	2.8	1.2	6	39	2	42	40	40

YC/YL Series single phase asynchronous motor

2009-7-3 15:33:03

]]><P>YC,YL series single phase asynchronous motor manufactured according with the Stats Standard, the are characterized with the merits of good performance in start and running, low noise, small body easy for maintenance. The machine protection grade: IP44, cooling method: ICO141, insulation grade:B, working type: continual,voltage:220V, frequency 50Hz. <BR>The Y aeries is full enclosed squirrel-cage phrase asynchronous motor, it is characterized with the merits of high efficiency, energy-saving, large torque, low noise, slight vibration, hgh reliability easy for service and maintenance.</P>

Double speeds air-condition motor

2009-7-3 15:50:25

]]><STRONG> <P>Use and Feature :<BR>This Motor have doubloe speeds function, the speed can adjustable, Set up a damping dcvice, low noise, the Motor have good cooling performance, especial apply to Water-cooled air-conditioning, central air conditioning equipment aand matching for other industrial equipments.<BR>Technical Data:<BR>Modelis CL12M280B1 ,power is 1/31/9(ph),Voltage is 220(v) , Frequ-ency is 50(Hz),Speed is 1425/950(r/min), Weight is 17(kg),quality is 2(pcs), Package Dimension of L is 36 (cm) ,Package Dimension of W is 27.5(cm) ,Package Dimension ofH is 25(cm).<BR></STRONG><STRONG></P></STRONG>

Single phase asynchronous motor

2009-2-25 8:12:31

]]>

YC,YL series single phase asynchronous motor manufactured according with the Stats Standard, the are characterized with the merits of good performance in start and running, low noise, small body easy for maintenance. The machine protection grade: IP44, cooling method: ICO141, insulation grade:B, working type: continual,voltage:220V, frequency 50Hz.
The Y aeries is full enclosed squirrel-cage phrase asynchronous motor, it is characterized with the merits of high efficiency, energy-saving, large torque, low noise, slight vibration, hgh reliability easy for service and maintenance.