http://www.tradevv.com/chinasuppliers/cnjianpaien-ustradevv.comhttp://www.tradevv.com/chinasuppliers/cnjianpai/offers-detail-242e/High-Efficiency-Film-Coating-Machine.html]]>Model JGB-D high efficiency coaing mahine has enhanced the function on the foundation of that of Model JGB-C. Features—— 1. New type main frame: The two sides of main frame apply dual-layer hinge gate construction, so has the features of sound-proof, heal insulation and easy operation, also increased the width of two sides of the case, so simplify the mounting of color copper plate. 2. Apply micro-pressure transducer, automatically control the open and close of butterfly valve, the air quantity and pressure, to achieve best coating result. 3. Automatically record, save and print the process data. 4. Automatically carry out the purification, diversion and pressure-regulating of spraying air source, also has the function of air source and power cut-off to ensure normal process for spraying system. 5. Mounted high-pressure cleanser and hand-operated cleaning gun, so it is easy and completely to perform cleaning process.2007-12-13 17:14:41http://www.tradevv.com/chinasuppliers/cnjianpai/offers-detail-242f/Vacuum-Emulsion-Equipment.html]]>Purpose—— The equipment is applicable for production of electuary, creams, suppository, paints, foodstuff, medicines and chemicals. Principle of operation—— Buy using a grid agitating paddle and a wall scraper the machine evenly mixes materials with high viscosity, the materials are sent to the head of homogenizer via the backflow agitating paddle to be sheared with high speed until emulsification. Features—— 1. Advance design of the agitating paddle that can mix materials in a high speed and can send them to the homogenizer quickly. 2. Both high-precision homogenizer and shearing force are designed for the machine. 3. Good sealing performance, vacuum keeps longer. 4. Materials with supper high viscosity can be mixed and emulsifie(>50.000C. P. S). 5. The equipment has the function of self-cleaning. 6. Under operation mode of the equipment, the wall scraper can scrape closely against the bottom and the wall of the pot automatically. 7. For electrical control parts, man-machine interface automatic control is used; For PLC, touch screen and vacuum pumps, Siements' products are used, PANASONIC transducer and German button switches are used. 8. Both electric heating and steam heating are used. 9. Parts of the equipment that contact materials are made in SUS316L(SUS304). 10. Inner surface of the pot was polished to grade 300EMSH.2007-12-13 17:19:43http://www.tradevv.com/chinasuppliers/cnjianpai/offers-detail-2431/High-Efficiency-Wet-Process-Granulating-Machine.html]]>Purpose: Model JHZ-C high-efficiency wet-process granulating machine (also called as wet-process compound granulating machine) is a special equipment used in wet-process compound granulation for medicine powder, amylum and adhesive in pharmacy industry to produce medicine pill, also used to compound and granulate the powder material in foodstuff industry and chemical industry. The contact part between equipment and raw material is made of high-grade stainless steel. This equipment is in conformity with GMP standard of pharmacy industry. Principle of operation: The stirring paddle and granule-cutter move in opposite direction, so make the raw material compound completely and granulation stabilized, the produced granule is tiny, even and regular spherical, the surface of pressed flake is smooth; Its hardness, degree of disintegration and release are all better. This machine works in a tightly sealed environment, so it has the features of high efficient, energy save, clean & safety, furthermore, the process is easy to understand and operation is simple. Features: 1. Main bucket: Apply tangency construction with cylinder and cone to help tumbling of raw material; The geometric angle of stirring paddle and granule-cutter are reasonably designed to enhance the effect of compound granulation. 2. The granule-cutter mounted with an inclined angle against the wall of straight bucket, so can improve the granulating scope between cutter and raw material and make the granule more even; Meanwhile, as the cutter mounted with an inclined angle, the raw material wont splash onto the bucket lid, so overcome the defect of wet granule sticking onto the bucket lid in traditional granulating method. 3. For every batch of material, dry compound takes 2 minutes, granulating process takes 1-4 minutes, so the work efficiency has enhanced by 4-5 times than traditional method. 4. Full process performed in a tightly sealed container, dry compound wet compound—granulating process, the adhesive can save 25% than traditional method, and also can reduce the drying time. 5. Operation and control system: Controlled by MCU, and operated by touch screen, can store many sets of process data. The granule-cutter apply frequency conversion speed regulating technology, so can adjust its speed arbitrarily and meet the requirement of different granule. 6. Construction of bucket lid: Apply cylinder automatically interlock device, operated by touch screen, so it is easy to operate. 7. Transmission system: The design is reasonable, still with features of low noise, tight seal and long service life.2007-12-13 17:22:57http://www.tradevv.com/chinasuppliers/cnjianpai/offers-detail-2432/High-Efficiency-Ebullient-Drying-Machine.html]]>Purpose—— This machine is used for drying with ebullition method for granule raw material which diameter between 0.1-6mm.It is widely used to dry rapidly the finished or semi-finished product in pharmacy, foodstuff, light industry, chemical industry. Principle of operation—— The natural air, after heating and purification, is drawn by suction fan into a container;The raw material go through the porous screen and form fluid material under the blending and negative pressure status.In a large areas contact between gas and solid, the moisture in the raw material (solid status) will evaporate rapidly and expel through the exhaust pipe, so fulfill the drying process for the raw material. Features—— 1.The raw material container is a cylinder and sealed with an O-ring, so it is easy to operate, as well as rapid and reliable. 2.The container equipped with a blender, the dried material has good fluidity, no end-corner, and dry quickly and evenly. 3.The top part equipped with a filter bag and a bag auto-shaking device to prevent the raw material from waste. 4.With rapid drying speed, the drying time of every batch of raw material is about 20-30 minutes. 5.Equipped with a butterfly end-cover, with less wind resistance and no end-corner.All processes are performed within tightly sealed environment, no cross contamination, and in conformity with GMP standard.2007-12-13 17:24:51http://www.tradevv.com/chinasuppliers/cnjianpai/offers-detail-2433/Three-Eccentricity-Mixing-Machine.html]]>Purpose: Model JPH three-eccentricity mixing machine is widely used to mix raw material in pharmacy, foodstuff industry, chemical industry, plastic & ceramic industry, etc., especially for those granule or powder materials of humid, soft and uneven specific gravity. Principle of operation: The bucket is eccentric in three ways—centroidal, axial and up-down and asymmetrical in six directions—capacity of up- and down-angle, capacity of left- and right-angle, and capacity of front- and back-angle. The multidirectional dislocation crisscross motion along a single plane and with different capacity, which following this principle, will ensure the best mixing result for raw material. Features: 1. This machine has features of compact structure, high load capacity, easy to feed and discharge raw material, frequency conversion stepless speed-regulation, and infrared safety control, etc. 2. This machine meets the urgent needs for large capacity, high efficiency and low cost mixing machine in domestic market.2007-12-13 17:27:26http://www.tradevv.com/chinasuppliers/cnjianpai/offers-detail-2434/3D-Motion-Mixing-Machine.html]]>Purpose—— Model JSH-B 3D motion mixing machine is widely used to mix raw material in pharmacy, foodstuff industry, chemical industry, plastic & ceramic industry, etc. It has features of high degree of mixing uniformity, good fluidity, high allowable load ratio, and can mix perfectly the granule or powder of humid, soft and uneven specific gravity. Principle of operation—— This equipment applies 3D motion law and with special motion function, i. E. Moving in a unique way, e. G. Revolving, waving & rotating, translational motion, intersection, transpose, tumbling, etc. Multidirectional complex motion. During the compound process, the mixing-bucket revolves simultaneously both on its own axis and round the common track, so the polyhedrical mixing-bucket wave and tumble intensely, also draw by itself with the feature of polyhedron, so increase the tilt angle of raw material and enlarge the scope of rotation, also eliminate the effects of centrifugal force; Therefore, completely ensure the raw material flow and diffuse by itself, also avoid specific gravity segregation, lamination, integration and end-corner of raw material, and make raw material mixed perfectly. Features—— This mixing machine is specially designed and fabricated reasonably, and with the feature of fine polishing, high degree of mixing uniformity, without pollution, no end-corner, without residual material, easy to feed & discharge raw material, easy to clean, still with nice appearance. 1. Mixing-bucket—octagonal bucket with large arc, make the raw material moving without skid, guide the raw material rolling randomly. 2. Frequency conversion speed regulating—accord to the amount, shape and specific gravity of raw material, applies different mixing speed to acquire best effect of mixing. 3. Triangle reinforced steel—stabilize machine running, enhance the strength of frame, no water sticking, easy to clean. 4. Frame with weight inside—stabilize and poise machine running, reduce vibration and noise. 5. The subsidiary axis equipped with an elasticity compensation device.2007-12-13 17:29:01http://www.tradevv.com/chinasuppliers/cnjianpai/products-detail/china-High-Efficiency-Sugar-amp-Film-Coating-Machine-23ef.html]]>This machine is widely used for coating medical pill in tranditional chinese and western medicine, and candy and chocolate in foodstuff industry. All the requirements are conformity with GMP pharmacy standard. Features—— 1. Operation system: Touch screen, dynamic display, man-machine interface, manual/automatic control mode, data and parameter save for a large number of processes, with advanced software program. 2. Adjustable exhaust shutter: Save coating material and thermal energy, improve coating quality, also with large load capacity. 3. Spiral blender: Overcome the defects of traditional blender during coating process, such as pill-hold, pill-crush, pill-lost, pill-break, uneven coating and low density, etc. 4. Frequency conversion squirming pump: Apply data programming and frequency conversion speed regulating technology, communicating with MCU to control automatically the spraying volume, so the medium is conveyed in fixed amount; Also can adjust the degree of squashing distortion of soft pipe, so improve the service life of silica gel pipe. 5. Tightly sealed structure: Apply dual-layer elastic silicone rubber, with high tightness. 6. Spraying gun: No blockage and drip leakage, easy to clean, with good atomization result.2007-12-12 23:06:16http://www.tradevv.com/chinasuppliers/cnjianpai/products-detail/china-3D-Motion-Mixing-Machine-23fa.html]]>Model JSH-B 3D motion mixing machine is widely used to mix raw material in pharmacy, foodstuff industry, chemical industry, plastic & ceramic industry, etc. It has features of high degree of mixing uniformity, good fluidity, high allowable load ratio, and can mix perfectly the granule or powder of humid, soft and uneven specific gravity. This mixing machine is specially designed and fabricated reasonably, and with the feature of fine polishing, high degree of mixing uniformity, without pollution, no end-corner, without residual material, easy to feed & discharge raw material, easy to clean, still with nice appearance. 1. Mixing-bucket—octagonal bucket with large arc, make the raw material moving without skid, guide the raw material rolling randomly. 2. Frequency conversion speed regulating—accord to the amount, shape and specific gravity of raw material, applies different mixing speed to acquire best effect of mixing. 3. Triangle reinforced steel—stabilize machine running, enhance the strength of frame, no water sticking, easy to clean. 4. Frame with weight inside—stabilize and poise machine running, reduce vibration and noise. 5. The subsidiary axis equipped with an elasticity compensation device.2007-12-12 23:32:53http://www.tradevv.com/chinasuppliers/cnjianpai/products-detail/china-Three-Eccentricity-Mixing-Machine-23f6.html]]>Model JPH three-eccentricity mixing machine is widely used to mix raw material in pharmacy, foodstuff industry, chemical industry, plastic & ceramic industry, etc., especially for those granule or powder materials of humid, soft and uneven specific gravity. 1. This machine has features of compact structure, high load capacity, easy to feed and discharge raw material, frequency conversion stepless speed-regulation, and infrared safety control, etc. 2. This machine meets the urgent needs for large capacity, high efficiency and low cost mixing machine in domestic market.2007-12-12 23:29:19http://www.tradevv.com/chinasuppliers/cnjianpai/products-detail/china-High-efficiency-Wet-Process-Granulator-23f1.html]]>Model JHZ-C high-efficiency wet-process granulating machine (also called as wet-process compound granulating machine) is a special equipment used in wet-process compound granulation for medicine powder, amylum and adhesive in pharmacy industry to produce medicine pill, also used to compound and granulate the powder material in foodstuff industry and chemical industry. The contact part between equipment and raw material is made of high-grade stainless steel. This equipment is in conformity with " GMP" Standard of pharmacy industry.2007-12-17 18:10:13http://www.tradevv.com/chinasuppliers/cnjianpai/products-detail/china-High-Efficiency-Ebullient-Drying-Machine-242c.html]]>Drying Machine, Pharmaceutical, Film Coating Machine, Coating Machine, Blister Packing Machine, Mixing Machine, Extracting Machine, Vibrating Sifter, Super Mixing Granulator, Pharmaceutical Machine This machine is used for drying with ebullition method for granule raw material which diameter between 0.1-6mm. It is widely used to dry rapidly the finished or semi-finished product in pharmacy, foodstuff, light industry, chemical industry 1. The raw material container is a cylinder and sealed with an O-ring, so it is easy to operate, as well as rapid and reliable. 2. The container equipped with a blender, the dried material has good fluidity, no end-corner, and dry quickly and evenly. 3. The top part equipped with a filter bag and a bag auto-shaking device to prevent the raw material from waste. 4. With rapid drying speed, the drying time of every batch of raw material is about 20-30 minutes. 5. Equipped with a butterfly end-cover, with less wind resistance and no end-corner. All processes are performed within tightly sealed environment, no cross contamination, and in conformity with "GMP" standard.2007-12-13 16:50:03http://www.tradevv.com/chinasuppliers/cnjianpai/products-detail/china-Jpzrs-Hydraulic-Lifting-Vacuum-Emulsion-Equipment-23ea.html]]>WORKING PRINCIPLE: By using a grid agitaing paddle and a wall scraper the machine evenly mixes materials with high viscosity, the matefials are sent to the head of homogenizer via the backflow agitating paddle to be sheared with high speed until emulsification. APPLICANTION: The equipment is applicable for production of electuary, creams suppository, paints, foodstuff, medicines and chemicals. CHARACTERISTICS OF THE EQUIPMETN: 1. Advanced desigh of the agitating paddle that can mix materials in a high speed and can send them go thehomogenizer quickly. 2. Both high-precision homogenizer and shearing force are designed for the machine. 3. Good sealing performance, vacuum keeps longer. 4. Materials with super high viscosity can be mixed and emulsified(>50.000C. P. S) 5. The equipment has the function of self-cleaning. 6. Undr operation mode of the equipment, the wall scraper can scrape closely against the bottom and the wall of the pot automatically. 7. For electrical control parts, man-machine interface automatic control is used; For PLC, touch screen and vacuum pumps, siemens's products are used, Panasonic transducers and German button switches ard used. 8. Both electric heating and steam heating are used. 9. Parts of the equipment that contact materials are made in SUS316L(SUS304) 10. Inner surface of the pot was polished to Grade 300 EmSH.2007-12-12 22:50:12