Tom Medical Supplies Co., Ltd.

Pulse oximeter

2009-12-9 19:52:56

]]>Integrated with SPO2 probe and processing display module ■ Can be used in: hospital, home, community medical treatment, sports healthcare, etc. ■ Can measure SPO2 and PR accurately ■ SPO2 and PR display, PR waveform and bargraph display ■ Battery voltage indicator ■ Dual direction display ■ Low power consumption; shut off automatically when no signal ■ Small volume(66(L) × 36(W) ×33(H) mm)、light，convenient to carry Technical Parameters ■ Display Format: 64k color OLED, resolution 96*64 ■ Spo2: 35～99％ Pulse Ratio：30～250BPM ■ Resolution: 1% for SPO2, 1BPM for pulse ratio ■ Accuracy: ±2% (70％～ 99％), unspecified (<70%) for SPO2, ±2BPM or±2% (select larger) for pulse ratio ■ Power: 1.5V (AAA size) alkaline batteries × 2 ■ Can work more than 12 hours continuously ■Interference resistance capacity against ambient light and measurement performance at low perfusion

Pulse oximeter

2009-12-9 19:52:56

Hemodialysis machine

2009-12-9 19:52:56

]]>▲ TMS-2028 main technical parameter ◆ Volume (length× width ×height): ?370mm×340mm ×1570mm ◆ Weight: about 90kg 　　 ◆ Power supply voltage: AC220V±10% 　　 ?Frequency: 50HZ ~ 60 HZ ?Power: 1500W ◆ Blood pump/spare pump: ?Flux: 15 ~ 340ml/min (Ф 6mm) 20 ~ 460 ml/min (Ф 8mm) ◆ Heparin pump: ?Flux: 0.1ml/h～10ml/h(±5%) ?Precise: 0.1ml/h ?Injector size: 20ml/30ml/50ml 10ml/20ml/30ml (selectable) ◆ Arterial pressure: ?display scope:-300mmHg～+300mmHg (±10mmHg) ◆ Venous pressure: ?display scope:-50mmHg～+300mmHg (±10mmHg) ◆ Dialysate flow: ?300ml/min～800ml/min linearity adjustable (+10%) (-5%) ?Temperature:35.0℃~39.0℃ ?Resolving rate:0.1℃ ?Conductivity:13mS/cm~15.5mS/cm (±0.1 mS/cm) ◆ UF flow scope: 0～1800ml/h(±30ml/h ) 0～4000ml/h(optional) ◆ ISO UF flow scope:0～2000ml/h(±30ml/h) ◆ TMP ?Scope:-100mmHg～+600mmHg (±20mmHg) ◆ Blood leakage monitor: ?over 1ml blood per liter dialysate (flow:500ml/min) ◆ Blood level monitor: ultrasonic sensor ◆ Air bubble monitor: ?Infrared and response threshold value: Single air bubble of 200 и I exists when Blood flux is 200ml/min ◆ Inflow pressure:0MPa～0.6MPa ◆ Inflow temperature: 5℃～30℃ ◆ Environment temperature: 10℃～30℃, ? Relative humidity≤70% ◆ Rinse/disinfection: chemical disinfection (citric acid,peracetic acid and oxalic acid) ◆ Hot rinse: 80℃ ◆ Back-up power supply: last for 15-30min after electric-cut.(optional) ▲ TMS-2028 function Be applicable of hemodialysis treatment,hemoperfusion,Plasma Exchange,Pure ultrafiltration project.Touch screen was equipped and it can show Na＋and UF profiles;In addition,the functions ie.backup power supply, Kt/V,HCO3ˉ adjustment,single needle and acetate treatment are optional. ▲ Clinical Application ◆ Hemodialysis Therapy:same as TMS-2000 ◆ Pure ultrafiltration Therapy: same as TMS-2000 ◆ Hemoperfusion Therapy:same as TMS-2000 ◆ Plasma exchange Therapy:same as TMS-2000 ◆ Na＋and UF profiling: ?Be applicable for reducing the cases during dialysis treatment such as low/high pressure,muscle convulsion, headache,nausea,vomit ect. ◆ Kt/V function: ?The sufficiency of dialysis can be reflected by Kt/V.(Optional) ◆ HCO3 adjustment function: ?Be applicable for sericous acid toxicosis patient. Be capable to calibrate the acid toxicosis status according to patient's state of illness.(optional) ◆ Backup power-supply: ?It can last for 15-30 minutes after power cut off.(Optional) Providing the programmed UF and adjustable Na+ dialysis(Totally there are seven Na+ curves and seven Ufcurves for your selection). The suitable curve can be selected basing on patien's actual status.

Pulse oximeter

2009-5-21 14:56:48

Pulse oximeter

2008-3-24 17:59:09

Hemodialysis machine

2009-5-21 15:16:23

]]>▲ TMS-2028 main technical parameter ◆ Volume (length× width ×height): •370mm×340mm ×1570mm ◆ Weight: about 90kg 　　 ◆ Power supply voltage: AC220V±10% 　　 •Frequency: 50HZ ~ 60 HZ •Power: 1500W ◆ Blood pump/spare pump: •Flux: 15 ~ 340ml/min (Ф 6mm) 20 ~ 460 ml/min (Ф 8mm) ◆ Heparin pump: •Flux: 0.1ml/h～10ml/h(±5%) •Precise: 0.1ml/h •Injector size: 20ml/30ml/50ml 10ml/20ml/30ml (selectable) ◆ Arterial pressure: •display scope:-300mmHg～+300mmHg (±10mmHg) ◆ Venous pressure: •display scope:-50mmHg～+300mmHg (±10mmHg) ◆ Dialysate flow: •300ml/min～800ml/min linearity adjustable (+10%) (-5%) •Temperature:35.0℃~39.0℃ •Resolving rate:0.1℃ •Conductivity:13mS/cm~15.5mS/cm (±0.1 mS/cm) ◆ UF flow scope: 0～1800ml/h(±30ml/h ) 0～4000ml/h(optional) ◆ ISO UF flow scope:0～2000ml/h(±30ml/h) ◆ TMP •Scope:-100mmHg～+600mmHg (±20mmHg) ◆ Blood leakage monitor: •over 1ml blood per liter dialysate (flow:500ml/min) ◆ Blood level monitor: ultrasonic sensor ◆ Air bubble monitor: •Infrared and response threshold value: Single air bubble of 200 и I exists when Blood flux is 200ml/min ◆ Inflow pressure:0MPa～0.6MPa ◆ Inflow temperature: 5℃～30℃ ◆ Environment temperature: 10℃～30℃, • Relative humidity≤70% ◆ Rinse/disinfection: chemical disinfection (citric acid,peracetic acid and oxalic acid) ◆ Hot rinse: 80℃ ◆ Back-up power supply: last for 15-30min after electric-cut.(optional) ▲ TMS-2028 function Be applicable of hemodialysis treatment,hemoperfusion,Plasma Exchange,Pure ultrafiltration project.Touch screen was equipped and it can show Na＋and UF profiles;In addition,the functions ie.backup power supply, Kt/V,HCO3ˉ adjustment,single needle and acetate treatment are optional. ▲ Clinical Application ◆ Hemodialysis Therapy:same as TMS-2000 ◆ Pure ultrafiltration Therapy: same as TMS-2000 ◆ Hemoperfusion Therapy:same as TMS-2000 ◆ Plasma exchange Therapy:same as TMS-2000 ◆ Na＋and UF profiling: •Be applicable for reducing the cases during dialysis treatment such as low/high pressure,muscle convulsion, headache,nausea,vomit ect. ◆ Kt/V function: •The sufficiency of dialysis can be reflected by Kt/V.(Optional) ◆ HCO3 adjustment function: •Be applicable for sericous acid toxicosis patient. Be capable to calibrate the acid toxicosis status according to patient's state of illness.(optional) ◆ Backup power-supply: •It can last for 15-30 minutes after power cut off.(Optional) Providing the programmed UF and adjustable Na+ dialysis(Totally there are seven Na+ curves and seven Ufcurves for your selection). The suitable curve can be selected basing on patien's actual status.

Oximeter-50d

2009-12-8 11:17:11

]]> Integrated with SPO2 probe and processing display module. ■ Can be used in: hospital, home, community medical treatment, sports healthcare, etc. ■ Can measure SPO2 and PR accurately ■ SPO2 and PR display, PR waveform and bargraph display ■ Battery voltage low indication ■ Four directions and six modes ■ Four levels adjustable brightness ■ Low power consumption; shut off automatically when no signal ■ Small volume(57(L) * 31(W) *32(H) mm)、light，convenient to carry Technical Parameters ■ 1.3' double Color OLED display, resolution 160*64 ■ Spo2：35～99％ Pulse Ratio：30～250BPM ■ Resolution: 1% for SPO2, 1BPM for pulse ratio ■ Accuracy: +-2% (70％～ 99％), unspecified (<70%) for SPO2, +-2BPM or+-2% (select larger) for pulse ratio ■ Power: 1.5V (AAA size) alkaline batteries * 2 ■ Can work more than 30 hours continuously ■Interference resistance capacity against ambient light and measurement performance at low perfusion

Oximeter

2009-12-8 11:17:11

]]>Integrated with SPO2 probe and processing display module ■ Can be used in: hospital, home, community medical treatment, sports healthcare, etc. ■ Can measure SPO2 and PR accurately ■ SPO2 and PR display, PR waveform and bargraph display ■ Battery voltage indicator ■ Friendly Operation Menu for The Function Setting ■ 4 Direction Dispaly ■ Four levels adjustable brightness ■ Pulse sound function ■ Alarm function; can set upper and lower limits. ■ Can store data ■ USB interface to Computer, software can analyse, store and print the data. ■ Rechargeablr Li battery ■ Low power consumption; shut off automatically when no signal ■ Small volume(57(L)*32(W)*30(H) mm)、light，convenient to carry Technical Parameters ■ 1.3' 65K Color OLED display, resolution 160*128 ■ SPO2: 35～99％ Pulse Ratio：30～250BPM ■ Resolution: 1% for SPO2, 1BPM for pulse ratio ■ Accuracy: +-2% (70％～99％), unspecified (<70%) for SPO2, +-2BPM or+- 2% (select larger) for pulse ratio ■ Power: 1 rechargeable Li battery ■ Charge manner : AC transformer or PC USB port ■ Can work more than 24 hours continuously ■Interference resistance capacity against ambient light and measurement performance at low perfusion

Oximeter

2009-12-8 11:17:11

]]>The one to be worn comfortably on the patients wrist for easy spot-check of blood oxygen saturation and pulse rate. Can be used for monitoring daily activities and overinght sleep studies,The compact design is intended to give the patient greater freedom while improving patient compliance. ■ Compact and light weight design,fit comfortably on the patient wrist ■ Simply plug in the sensor and out ■ For spot checking short and long term monitoring applications ■ High accuracy and repetition ■ Friendly operation menu for the funcion setting ■ 256k color OLED display whit 4 directions ■ Pulse strength:OLED Graphic display ■ Battery Voltage indication:OLED graphic display

Oximeter

2009-12-8 11:17:11

]]> Probe can be used for: adult, child ■ Can be used in: hospital, home, community medical treatment, sports healthcare, etc. ■ Can measure SPO2 and PR accurately ■ SPO2 and PR display, PR waveform and bargraph display ■ Battery voltage indicator ■ Friendly Operation Menu for The Function Setting ■ Dual dirsction display ■ Three levels adjustable brightness ■ Pulse sound function ■ Store and Alarm function; can set upper and lower limits. ■ USBinterface to Computer, software can analyse, store and print the data. ■ Rechargeablr Li battery ■ Function switch used to activate measurement and turn off power; function key for menu setting ■ Low power consumption ■ Small volume(87(L)*45(W)*22(H) mm)、light，convenient to carry Technical Parameters ■ 1.8' 65K Color TFT display, resolution 160*128 ■ SPO2: 35～99％ Pulse Ratio：30～250BPM ■ Resolution: 1% for SPO2, 1BPM for pulse ratio ■ Accuracy: +-2% (70％～99％), unspecified (<70%) for SPO2, +-2BPM or+- 2% (select larger) for pulse ratio ■ Power: 1 rechargeable Li battery ■ Charge manner : AC transformer or PC USB port ■ Can work more than 24 hours continuously ■Interference resistance capacity against ambient light and measurement performance at low perfusion

ECG

2009-12-8 11:17:11

]]>Input circuit : Floating ■Calibrating Voltage :1mV ?% ■Input current :<100nA ■CMRR :>103dB ■A/D :12bit ■Frequency Response: 0.05Hz--150Hz ■Filter :AC 50/60Hz EMG: 35-4Hz ■Skin Voltage Tolerance :?00mV ■Sensitivity Setting 5 、10 、20mm/mV, conversion deviation?% ■Noisy Level :?5Vp-p ■Safety standard :IEC class I, type CF ■Lead selection :Automatic and Manual ■Operation mode :Automatic and Manual ■Display :LCD 160*96 visual size: 34*60 ■Recording system :Thermal-array printing ■Power supply: AC220V?0% DC 7.4 lithium battery

ECG

2009-12-8 11:17:11

]]> High-resolution thermal printing array system ■ Frequency response is as high as 150Hz ■ Capable of printing continuously on channel trace and annotations including lead mark and parameter such as sensitivity, paper speed and filter operation status ■ High resolution digital filter inhibits baseline drift without affecting ECG waveform ■ One-touch operation ■ Concept of floating input circuit meets IEC safety standard ■ Rechargeable battery supporting more than 50 patient examinations ■ Lead Standard: 12 leads Specifications Input Circuit Floating; Protection against Defibrillator effect Lead Standard 12 Leads, Lead change automatically Patient Current Leakage <10μA Input Impedance >=10ΜΩ Calibrating Voltage 1mV+-3% A/D Conversion 12 bit Frequency Response 0.05Hz~150Hz (IEC) Time Constant >3.2seconds CMRR >80dB >100dB (with filter) EMG Filter 35Hz (-3dB) / 25Hz (-3dB) Sensitivity 1/2, 1, 2 (cm/mV), Conversion Deviation<=5% Recording System Thermal-array 8 dots/mm ( vertical ) 16 dots/mm ( horizontal, 25mm/sec ) Paper Speed 25, 50mm/s+-3% Recording Paper 50mm,20m, high-speed roll Input Circuit Current =<50nA Safety Standard IEC class I, type CF Power Supply AC: 220V / 110V, 50/60Hz DC: 12V rechargeable battery Skin Voltage Tolerance +-300mV Noise Level <15uVp-p Dimensions 310mm*230mm*70mm Dimension of Packing 400mm*280mm*160mm Weight 2.75kg

ECG

2009-12-8 11:17:11

]]>High-resolution thermal printing array system ■ Frequency response is as high as 150Hz ■ Capable of printing continuously on channel trace and annotations including lead mark and parameter such as sensitivity, paper speed and filter operation status ■ High resolution digital filter inhibits baseline drift without affecting ECG waveform ■ One-touch operation ■ Concept of floating input circuit meets IEC safety standard ■ Rechargeable battery supporting more than 50 patient examinations ■ Lead Standard: 12 leads Specifications Input Circuit Floating; Protection against Defibrillator effect Lead Standard 12 Leads, Lead change automatically Patient Current Leakage <10μA Input Impedance >=10ΜΩ Calibrating Voltage 1mV+-3% A/D Conversion 12 bit Frequency Response 0.05Hz~150Hz (IEC) Time Constant >3.2seconds CMRR >80dB >100dB (with filter) EMG Filter 35Hz (-3dB) / 25Hz (-3dB) Sensitivity 1/2, 1, 2 (cm/mV), Conversion Deviation=<5% Recording System Thermal-array 8 dots/mm ( vertical ) 16 dots/mm ( horizontal, 25mm/sec ) Paper Speed 25, 50mm/s+-3% Recording Paper 50mm,20m, high-speed roll Input Circuit Current =<50nA Safety Standard IEC class I, type CF Power Supply AC: 220V / 110V, 50/60Hz DC: 12V rechargeable battery Skin Voltage Tolerance +-300mV Noise Level <15uVp-p Dimensions 310mm*230mm*70mm Dimension of Packing 400mm*280mm*160mm Weight 2.75kg

ECG

2009-12-8 11:17:11

]]>Input Circuit : Floating; Protection against Defibrillator effect ■Lead: Standard 12 leads ,Lead change automatically ■Patient Current Leakage:<10 μ A ■Input Impedance:≥50 ΜΩ ■Calibrating Voltage: 1mV ±3% ■A/D Conversion:12 bit ■Display:320×240LCD ■Frequency Response:0.05Hz-150Hz ■Time Constant:>3.2seconds ■CMRR:>80d>100dB(with filter) ■Paper Speed:25,50mm/s±3% ■Recording Paper: 210mm×30m, A4 size ■Input Circuit Current: ≤50nA ■Safety Standard: IEC class I, type CF ■Sensitivity: 1/2,1,2(cm/mV) ■Skin Voltage Tolerance: ±300mV ■Noise Level:<15 μVp-p ■Weight: 5.1kg Feature: ■Simultaneous 12 leads acquisition and printing ■Automatic measurement and interpretation;R-R analysis

Oximeter

2008-3-24 18:37:49

]]>Integrated with SPO2 probe and processing display module ■ Can be used in: hospital, home, community medical treatment, sports healthcare, etc. ■ Can measure SPO2 and PR accurately ■ SPO2 and PR display, PR waveform and bargraph display ■ Battery voltage indicator ■ Friendly Operation Menu for The Function Setting ■ 4 Direction Dispaly ■ Four levels adjustable brightness ■ Pulse sound function ■ Alarm function; can set upper and lower limits. ■ Can store data ■ USB interface to Computer, software can analyse, store and print the data. ■ Rechargeablr Li battery ■ Low power consumption; shut off automatically when no signal ■ Small volume(57(L)*32(W)*30(H) mm)、light，convenient to carry Technical Parameters ■ 1.3' 65K Color OLED display, resolution 160*128 ■ SPO2: 35～99％ Pulse Ratio：30～250BPM ■ Resolution: 1% for SPO2, 1BPM for pulse ratio ■ Accuracy: +-2% (70％～99％), unspecified (<70%) for SPO2, +-2BPM or+- 2% (select larger) for pulse ratio ■ Power: 1 rechargeable Li battery ■ Charge manner : AC transformer or PC USB port ■ Can work more than 24 hours continuously ■Interference resistance capacity against ambient light and measurement performance at low perfusion

Oximeter

2008-3-24 19:28:52

Oximeter

2008-3-24 19:41:22

Oximeter-50d

2008-3-24 18:12:53

ECG

2009-5-21 15:06:07

ECG

2009-5-21 15:08:03

ECG

2009-5-21 15:09:26

]]>High-resolution thermal printing array system ■ Frequency response is as high as 150Hz ■ Capable of printing continuously on channel trace and annotations including lead mark and parameter such as sensitivity, paper speed and filter operation status ■ High resolution digital filter inhibits baseline drift without affecting ECG waveform ■ One-touch operation ■ Concept of floating input circuit meets IEC safety standard ■ Rechargeable battery supporting more than 50 patient examinations ■ Lead Standard: 12 leads Specifications Input Circuit Floating; Protection against Defibrillator effect Lead Standard 12 Leads, Lead change automatically Patient Current Leakage <10μA Input Impedance >=10ΜΩ Calibrating Voltage 1mV+-3% A/D Conversion 12 bit Frequency Response 0.05Hz~150Hz (IEC) Time Constant >3.2seconds CMRR >80dB >100dB (with filter) EMG Filter 35Hz (-3dB) / 25Hz (-3dB) Sensitivity 1/2, 1, 2 (cm/mV), Conversion Deviation=<5% Recording System Thermal-array 8 dots/mm ( vertical ) 16 dots/mm ( horizontal, 25mm/sec ) Paper Speed 25, 50mm/s+-3% Recording Paper 50mm,20m, high-speed roll Input Circuit Current =<50nA Safety Standard IEC class I, type CF Power Supply AC: 220V / 110V, 50/60Hz DC: 12V rechargeable battery Skin Voltage Tolerance +-300mV Noise Level <15uVp-p Dimensions 310mm*230mm*70mm Dimension of Packing 400mm*280mm*160mm Weight 2.75kg

ECG

2008-3-24 21:23:16

Spo2 Patient Monitor

2009-12-9 19:52:56

]]>Measurement Range:35-100% ■ Resolution:1% ■ Accuracy:70-100% ±2% 0-69% unspecified ■ Alarm range:0-100% Pulse Rate ■ Range: 0-254bpm ■ Resolution:1bpm ■ Accuracy: ±1bpm ■ Alarm range:0-254bpm Features ■ Compact and portable,easy to use ■ Suitable for adult, pediatric and neonatal patient. ■ Large color LCD display of NIBP, SPO2 and Pulse rate ■ Adjustable audible and visual alarms ■ Real-time ambulatory monitoring.24 hours storage and review of date. ■ All date can be transferred to a PC through Windows-based software for review and print. Specifications: ■ Display:Color LCD ■ Power: Two "AA", 1.5V Alkali Battery ■ Dimension:120*80*32mm ■ Weight:<350g(Including Batteries) NIBP ■ Method:Oscillometry ■ Mode:Manaual/Automatic/continous ■ Measurement Range:25-260mmHg(Max:280mmHg) ■ Automatic Measurement Interval:5,10,15,30,45,60,90 minutes ■ Resolution:ImmHg ■ Overpressure Protection:300mmHg ■ Alarm:Systolic,Diastolic, mean Alarm range:10-270mmHg

Parameter Montior

2009-12-9 19:52:56

]]>8.4″ color TFT display ■ Suitable for adult, pediatric and neonatal patient ■ Basic parameters (ECG, SpO2, NIBP) in a durable case for bedside monitoring and transport ■ Audible and visual alarms with adjustable alarm ranges ■ Networkable with CONTEC central monitoring system ■ Powerful data management and storage capacity ECG ■ Lead type:5-lead ■ Input: RA; LA; RL; LL; V ■ Sweep speed: 12.5mm/s, 25mm/s, 50mm/s ■ Accuracy: ?bpm or ?%, whichever is greater ■ Protection: Withstand 4000VAC/50Hz voltage in isolation against electrosurgical and defibrillation ■ S-T detection: YES, Arrhythmia analysis: YES ■ Alarm: YES, audible and visual alarm, alarm events recallable NIBP ■ Method: Oscillometry ■ Operation modes: Manual/Automatic/STAT ■ Measurement unit: mmHg/KPa selectable ■ Measurement types: Systolic, Diastolic, Mean ■ Over-pressure protection: YES SpO2 ■ Measurement range: 0-100% ■ Accuracy: ?digit (70~100%); ■ 0~69% unspecified Standard Configuration: ◇ ECG, NIBP, SpO2 Optional: ◇ RESP,2-TEMP,2-IBP,ETCO2,Network,Thermal Recorder

Parameter Monitor

2009-12-9 19:52:56

]]>12.1"High brightnees TFT LCD display ■ Portable ,streamline handle design ■ Big figure display ■ ECG Waveforms of 7-lead displayed in one screen ■ 96-hour tabular and graphic trends & date storage ■ Compatible and self identify 3-lead and 5-lead ECG cable ■NIBP dual Over Pressure Protection ■Isolated floating,anti defibrillation protected and anti high-frequency interference Standard parameter & configuration ■ 3/5 lead ECG,RESP,SpO2,NIMP,TEMP,PR,Network Optional parameter & configuration ■ 2-IBP,Recorder,12 lead ECG,ETCO2

Multi-parameter Monitor

2009-12-9 19:52:56

]]>Color TFT Screen, waveform up to 8 channels ■ Light and portable with build-in rechargeable battery ■ UP to 10 kinds of monitor parameters ■ Arrhythmia analysis, pace-marker detection and S-T Segmentanalysis ■ 72 hour storage and review of trend grams and tables, 40 second review of olographic wavefo rms. ■ Built-in recorder(option) ■ All-round monitor of adult ,pediatric and neonatal. ■ Electrosurgical unit and defibrillation protected ■ Standard parameters: ECG, NIBP, SPO2, Respiration, Temperature, Pulse rate ■ Option parameters: EtCO2, CO, IBP, Thermal Printer ECG ■ 5-lead or 3-lead selectable ■ Input: 5-lead: RA; LA; RL; LL; V or R; L; N; F; C ■ Lead selection: I; II; III; avR; avL; avF; Vx; CAL ■ Gain selection: 12.5mm/s, 25mm/s, 50mm/s ■ Accuracy: ?bpm or ?%, whichever is greater ■ Protection: Withstand 4000VAC/50Hz voltage in isolation against electrosurgical and defibrillation ■ Calibration signal: 1mV?% ■ Operation modes: Diagnostic, Monitor, Surgery ■ Alarm range: Adult: 15-300bpm ■ Pediatric/Neonatal: 15-350bpm ■ Alarm range: -2.0mV~2.0mV ■ S-T detection: YES, Arrhythmia analysis: YES ■ Alarm: YES, audible and visual alarm, alarm events recallable NIBP ■ Method: Oscillometry ■ Operation modes: Manual/Automatic/STAT ■ Measurement unit: mmHg/KPa selectable ■ Measurement types: Systolic, Diastolic, Mean ■ Measurement range: Adult: 10-270mmHg ■ Over-pressure protection: YES ■ Resolution: 1mmHg ■ Accuracy: Mean error and standard deviation per ANSI/AAMI SP-10 ■ Alarm: Systolic,Diastolic,Mean SpO2 ■ Measurement range: 0-100% ■ Accuracy: ?digit (70~100%); ■ 0~69% unspecified ■ Alarm range: 0-100% Respiration ■ Method: RA-LL impedance ■ Pediatric/Neonatal: 6-150rpm ■ Alarm range: Adult: 6-120rpm

Fetal Doppler

2009-12-9 19:52:56

]]>Baby Sound A Fetal Doppler is a safe and easy to use device that has been specially designed for use at home, allowing pregnant women to listen to their unborn baby's heart beat, movements and hiccups from as early as 10 to12 weeks. It is suitable for expectant mother to carry out regular checks on her baby in between routine hospital checks. It can not only reduce the expectant mother’s anxiety but also allow other members of the family to listen to the baby heartbeat. This portable device is also suitable for obstetricians, midwives and pregnant women. It can connect to a computer, CD or Type to record the baby heart sound and share your baby’s heart beat with family and friends via email. 2 AAA size batteries ( alkaline or chargeable) are very convenient to buy. The batteries can last more than 6 hours for continuous use ( depend on capability ) Feature and Technical Specification ■ All in one design ■ The probe and main units integrated togather ■ High sensitive doppler probe ■ Crystal clear sound ■ Low power consumption ■ Compact and light ■ Ergonomic design ■ Easy to use ■ CE approved ■ Ultrasound Frequency 2MHz Ultrasound Intensity <10mW/cm2 ■ Out put Headset with Volume Control ■ Double Audio Output sockets for Headset ■ Power Supply: 1.5V Battery x 2 (Type: AAA) ■ Sensitivity From 10 - 12 weeks ■ PC Interface cable ■ Battery Life >360 minutes Safty Standards ■ CE Certified, EN ISO 13485:2003 compliant ■ Conforms to UK and EC Medical Safety Requirements (Medical Directive 93/94/EEC) CE 0123 Dimensions ■ (L) 110 x (W) 55 x (H) 16 mm ■ WEIGHT: 80g( with 2 AAA batteries) ■ DISPLAY: 25*14 mm Inside The Box ■ Baby Sound A unit ■ 1 Headset ■ 1 Recording Cable ■ Instruction Manual ■ 1 year warranty Tips that will make the use of this fetal Doppler easier: - Take it with you when you first visit your doctor. The doctor or Ultrasound Tech can very easily show you how to find your baby heartbeats - During the first stages of the pregnancy place the Doppler probe just above the pubic hair. As your pregnancy progresses, you will find the heartbeat higher up.- Move the probe gently and very slowly. - Lean the Doppler probe downward toward the pubic bone. - Use some gel while using the Doppler probe. You don't need to buy any expensive Gel. You can use any general purpose Gel.

Doppler

2009-12-9 19:52:56

]]>sonotrax handheld Doppler can meet routine examination requirement of obstetricians, midwives, and pregnant women. It is a high performance model with FHR digital LCD display. It has three heart rate processing modes: real-time FHR display mode, averaged FHR display mode and manual mode. Both of the models have audio output, and can connect with earphone or recorder with audio input. Sonotrax has a slim, power saving and interchangeable ultrasound probe. Feature: ■ Easy to use ■ Accurate FHR detection and LCD display ■ Auto and manual counting ■ Built-in speaker ■ Automatic switch-off ■ Battery energy indication Function: FHR Detection: Speaker output/Earphone output LCD display, Three working modes: Real-time FHR Display mode, Averaged FHR Display mode, Manual mode, continuous operation time≥15hours

Parameter Montior

2008-3-24 21:54:33

Parameter Monitor

2008-3-24 22:00:59

Multi-parameter Monitor

2008-3-24 22:06:03

Spo2 Patient Monitor

2008-3-24 21:47:50

Doppler

2008-3-24 22:31:42

Fetal Doppler

2008-3-24 22:23:41

Fistula needle

2009-12-9 19:52:56

]]>

The AV fistula needle? Have got CE.

15G,16G,17G

PE bag, Blister packing.

Fistula needle

2009-5-21 14:52:55

]]>

The AV fistula needle? Have got CE.

15G,16G,17G

PE bag, Blister packing.