TAIAN SHI WUZHOU FUEL PUMP AND NOZZLES CO.,LTD

EDC ( Electronic Diesel Controller)

2009-8-21 10:33:45

]]>

It mainly used for testing Electronic VP,VE Pumps.

PQ400 double springs Nozzle tester

2009-8-21 10:33:45

]]>

Allows to test and to calibrate diesel double springs injectors.

l????????? Equipment with a manometer gauge for internal pressure regulation

l????????? Digital display permits to calibrate the injector opening pressure

l????????? One shot and continuous spraying test

l????????? rate of oil pressure and air pressure is 100:1

Sell PT212 PT CUMMINS PUMP TEST STAND

2009-8-21 10:33:45

]]>

PT 212 PT fuel pump Test bench is special equipment used to provide test and calibration for CUMMINS PT fuel pump. It has abundant functions, high measure precision, and fast sampling.

For instance: Fit for: PT(G), PT(G)VS, PT(G)MVS, PT(G)AFC. PT(G) AFC-VS, PT(G) EFC. PT(G)R. PT(H). fuel pumps etc and damping ASA valve.

PT212 PT CUMMINS PUMP TEST STAND

2009-5-22 14:22:21

]]>

PT 212 PT fuel pump Test bench is special equipment used to provide test and calibration for CUMMINS PT fuel pump. It has abundant functions, high measure precision, and fast sampling.

For instance: Fit for: PT(G), PT(G)VS, PT(G)MVS, PT(G)AFC. PT(G) AFC-VS, PT(G) EFC. PT(G)R. PT(H). fuel pumps etc and damping ASA valve.

12PSB-II type Diesel Fuel Injection Pump Test Bench

2009-1-3 14:02:18

]]>

1.Imported international advanced technology,use original packing imported converter,the test?stand has wide speed scope and good dynamic performance.

2.Direct output of main motor,start up with low voltage,save energy,small value of reduction of speed,high measurement accuracy,good reliability,and complete automatic protection function.

3.Clockwise or anticlockwise rotation speed is 0-4000r/min.It adopts WZ-I full-function digital controller and displays seven shifts preset of speed, rotate speed, count, fuel oil temperature. And equipped with systems such as air supply positive and negative pressure,VE pump inner pressure, reture oil amount, direct current electric power source and so on. It has full functions and convenient to use.

PQ2000 Common rail injector test bench

2009-2-24 9:33:51

]]>

It mainly used for test and ajustment of Common rail injector, and is suitable for the conventional injectors and double springs injecors.

Main technical characteristics of PQ2000 Common rail injector test bench

1.High pressure 0-1980bar

2. Check the injector starting pressure

3.Assessment of the injector spray fog quality

4. Inspeciton of the injector spray oil range

5.Check of the injector seal and angel

6.Check of the injector oil flow

7.The machine has? fog dissipation convulsion device to improve the work condition.

8.It has the two garde filter to ensure the cleanliness of test.

9.The parameter of common rail injector ( fuel spray counts, frquency, pulse width, pressure etc..)

can be set willfully.

PT212 PT CUMMINS PUMP TEST STAND

2009-2-10 9:50:07

]]>

PT 212 PT fuel pump Test bench is special equipment used to provide test and calibration for CUMMINS PT fuel pump. It has abundant functions, high measure precision, and fast sampling.

For instance: Fit for: PT(G), PT(G)VS, PT(G)MVS, PT(G)AFC. PT(G) AFC-VS, PT(G) EFC. PT(G)R. PT(H). fuel pumps etc and damping ASA valve.

Diesel injection fuel pump and nozzle test bench

2008-8-16 9:26:58

]]>

Main technical characteristics of 12PSB-II type Fuel Injection Pump Test bench

1.Imported international advanced technology,use original packing imported converter,the test?stand has wide speed scope and good dynamic performance.

2.Direct output of main motor,start up with low voltage,save energy,small value of reduction of speed,high measurement accuracy,good reliability,and complete automatic protection function.

Diesel injection fuel pump and nozzle test bench

2008-7-21 9:07:15

]]>

Main technical characteristics of PS2000-I type Fuel Injection Pump Test bench

1.Imported international advanced technology,use original packing imported converter,the test? stand has wide speed scope and good dynamic performance.

2.Direct output of main motor,start up with low voltage,save energy,small value of reduction of speed,high measurement accuracy,good reliability,and complete automatic protection function.

4.Controlled by industry computer and equipped with digital display. It can be used normally even if the computer is not start. It’s really reliable and high cost performance.

5.The computer in the test bench has large-scale data base,more than 2000 technical parameters of fuel pump can be referred easily.

ps2000-V Diesel injection fuel pump nozzle test bench

2009-8-21 10:33:45

]]>

1. It is a kind of frequency-changing speed-regulation Fuel Injection Pump Test Bench which has the most complete functions and best performance.The integral work station adopts 15/17 inch? liquid crystal display, both digital and screen display can be used. It has Chinese/English display menu.

2. It equipped with?debugging interface,operation interface,fuel pump parameter interface,and word illustration interface. Advanced angle, rotate speed, count, fuel oil temperature and so on could be displayed on the screen( Oil pressure, atmospheric pressure, rack bar stroke are optional).?It can be input fuel pump debugging data manually,print and?save it.

3. The integral work station adopts photoelectric isolation technology,complete isolation technology,compensate speed automatically,largely improved the work reliability and auuracy of test bench.

4. The test bench has network interface,can control many machines easily,Via upgrade,full-function oil-measurement digital display can be realized.(Optional)

ps2000-I Diesel injecion fuel pump nozzle test bench

2009-8-21 10:33:45

]]>

Main technical characteristics of PS2000-I type Fuel Injection Pump Test bench

1.Imported international advanced technology,use original packing imported converter,the test? stand has wide speed scope and good dynamic performance.

2.Direct output of main motor,start up with low voltage,save energy,small value of reduction of speed,high measurement accuracy,good reliability,and complete automatic protection function.

4.Controlled by industry computer and equipped with digital display. It can be used normally even if the computer is not start. It is really reliable and high cost performance.

5.The computer in the test bench has large-scale data base,more than 2000 technical parameters of fuel pump can be referred easily.

CR2000 Common Rail Injectors and Pumps Tester

2009-8-21 10:33:45

]]>

The function of the tester for CR high pressure pumps is to provide the desired signal to drive the solenoid in the pump being tested. CR2000 common rail Tester can used for testing following pumps:

BOSCH CP1-H， BOSCH CP1-K，BOSCH CP2 , BOSCH CP3，

DELPHI， DENSO HP2 AND HP3.

SIEMENS

It? can drive up to 6 common rail injectors in one time.

PQ2000 COMMON RAIL INJECTORS TEST BENCH

2009-8-21 10:33:45

]]>

It mainly used for test and ajustment of Common rail injector, and is suitable for the conventional injectors and double springs injecors.

Main technical characteristics of PQ2000 Common rail injector test bench

1.High pressure 0-1980bar

2. Check the injector starting pressure

3.Assessment of the injector spray fog quality

4. Inspeciton of the injector spray oil range

5.Check of the injector seal and angel

6.Check of the injector oil flow

7.The machine has? fog dissipation convulsion device to improve the work condition.

8.It has the two garde filter to ensure the cleanliness of test.

9.The parameter of common rail injector ( fuel spray counts, frquency, pulse width, pressure etc..)

can be set willfully.

Cr 2000 nozzle test bench

2009-3-20 14:50:53

]]>

It mainly used for test and ajustment of Common rail injector, and is suitable for the conventional injectors and double springs injectors.

Main technical characteristics of PQ2000?common rail injector test bench

1.High pressure 0-1980bar

2. Check the injector starting pressure

3.Assessment of the injector spray fog quality

4. Inspeciton of the injector spray oil range

5.Check of the injector seal and angle

6.Check of the injector oil flow

7.The machine has? fog dissipation convulsion device to improve the work condition.

8.It has the two garde filter to ensure the cleanliness of test.

Diesel injecion fuel pump nozzle test bench

2009-2-17 9:40:46

]]>

Main technical characteristics of PS2000-I type Fuel Injection Pump Test bench

1.Imported international advanced technology,use original packing imported converter,the test? stand has wide speed scope and good dynamic performance.

2.Direct output of main motor,start up with low voltage,save energy,small value of reduction of speed,high measurement accuracy,good reliability,and complete automatic protection function.

4.Controlled by industry computer and equipped with digital display. It can be used normally even if the computer is not start. It is really reliable and high cost performance.

5.The computer in the test bench has large-scale data base,more than 2000 technical parameters of fuel pump can be referred easily.

Diesel injection pump test bench

2009-3-6 9:25:13

]]>

PS2000-V type Fuel Injection Pump Test Bench（Integral Work Station）

Main technical characteristics of? integral work station type Fuel Injection Pump Test bench

1. It’s a kind of frequency-changing speed-regulation Fuel Injection Pump Test Bench which has the most complete functions and best performance.The integral work station adopts 15/17 inch? liquid crystal display, both digital and screen display can be used. It has Chinese/English display menu.

3. The integral work station adopts photoelectric isolation technology,complete isolation technology,compensate speed automatically,largely improved the work reliability and auuracy of test bench.

4. The test bench has network interface,can control many machines easily,Via upgrade,full-function oil-measurement digital display can be realized.(Optional)

(The test stand?is able to have?network interface.)

Diesel injection fuel pump nozzle test bench

2008-7-24 10:35:46

]]>

3. The integral work station adopts photoelectric isolation technology,complete isolation technology,compensate speed automatically,largely improved the work reliability and auuracy of test bench.

4. The test bench has network interface,can control many machines easily,Via upgrade,full-function oil-measurement digital display can be realized.(Optional)

12psb-II Diesel injection fuel pump nozzle test bench

2009-8-21 10:33:45

]]>

Main technical characteristics of 12PSB-II type Fuel Injection Pump Test bench

1.Imported international advanced technology,use original packing imported converter,the test?stand has wide speed scope and good dynamic performance.

2.Direct output of main motor,start up with low voltage,save energy,small value of reduction of speed,high measurement accuracy,good reliability,and complete automatic protection function.

Diesel injection fuel pump nozzle test bench

2008-7-29 10:34:20

]]>

Main technical characteristics of 12PSB-II type Fuel Injection Pump Test bench

1.Imported international advanced technology,use original packing imported converter,the test?stand has wide speed scope and good dynamic performance.

2.Direct output of main motor,start up with low voltage,save energy,small value of reduction of speed,high measurement accuracy,good reliability,and complete automatic protection function.

Diesel injection fuel pump test bench

2008-7-12 9:11:35

]]>

PS2000-V type Fuel Injection Pump Test Bench（Integral Work Station）

Main technical characteristics of? integral work station type Fuel Injection Pump Test bench

3. The integral work station adopts photoelectric isolation technology,complete isolation technology,compensate speed automatically,largely improved the work reliability and auuracy of test bench.

4. The test bench has network interface,can control many machines easily,Via upgrade,full-function oil-measurement digital display can be realized.(Optional)

(The test stand?is able to have?network interface.)