<![CDATA[Jinan Tianwei Innovation Oilfield Equipment Enterprise]]>

<![CDATA[Jinan Tianwei Innovation Oilfield Equipment Enterprise]]>http://www.tradevv.com/chinasuppliers/twcxamyen-ustradevv.com<![CDATA[Sell Piston rubber, valve insert,liner seal&gasket]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-81840/Sell-Piston-rubber-valve-insert-liner-seal-amp-gasket.html

Sell Piston rubber, valve insert,liner seal&gasket

]]>we also can supply a full line of&nbsp;rubbers ,seals for piston,rubber,liner,module of mud pump. If you need any kind of rubber seals, pls contact us.2009-9-15 15:36:33<![CDATA[Piston rubber, valve insert,liner seal&gasket]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-Piston-rubber-valve-insert-liner-seal-amp-gasket-8183f.html

Piston rubber, valve insert,liner seal&gasket

]]>we also can supply a full line of&nbsp;rubbers ,seals for piston,rubber,liner,module of mud pump. If you need any kind of rubber seals, pls contact us.2009-9-15 15:36:33<![CDATA[Supply Oilfield Drilling tool- Drill pipe Elevator and Casing Elevator]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-ad5e9/Supply-Oilfield-Drilling-tool-Drill-pipe-Elevator-and-Casing-Elevator.html

Supply Oilfield Drilling tool- Drill pipe Elevator and Casing Elevator

]]>OEE can supply series of elevators, including Casing Elevator/Spiders,CD Series Side Door Elevator,DD Type Center Latch Elevator,DDZ Elevator,Drill Collar Elevator,Single Joint Elevator,Slip Type Elevators,Sucker Rod Elevator,etc.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> ●CD Series Side Door Type Elevators, hoisting tools for handling drill pipe, casing, tubing and drill collar in oil and gas field. <o:p></o:p> ●Casing Elevators/Spiders, for handling casing from 41/2-14 inch O.D. and with capacties of 350 and 500 tons. <o:p></o:p> ●DD Type Center Latch Elevators ,hoisting tools for handling 90°shoulder drill pipe, casing, tubing and drill collar in oil and gas field. <o:p></o:p> ●DDZ Elevators,suitable for handling 18°taper shoulder drill pipe, drilling tools and etc. <o:p></o:p> ●Drill Collar Elevators ,hoisting tools for drill collars with zip lift recess and drill collars with lift plugs in oil and gas field.<o:p></o:p> ●Single Joint Elevator ,hoisting tools for handling single tubing, casing and drill pipe with taper joint. <o:p></o:p> ●Slip Type Elevators ,handling drill pipe,casing, tubing in oil and gas field. They are especially fit to integral joint tubing, non-coupled casing, electric submersible pump and other tubular goods. <o:p></o:p> All of our elevators are designed and manufactured according to API Spec <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:chmetcnv UnitName="a" SourceValue="8" HasSpace="False" Negative="False" NumberType="1" TCSC="0" w:st="on">8A</st1:chmetcnv>-Specification for Drilling and Production Hoisting Equipment.For any question, pls contact us.<o:p></o:p>2009-12-10 15:20:42<![CDATA[Oilfield Drilling tool- Drill pipe Elevator and Casing Elevator]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-Oilfield-Drilling-tool-Drill-pipe-Elevator-and-Casing-Elevator-ad5e8.html

Oilfield Drilling tool- Drill pipe Elevator and Casing Elevator

]]>OEE can supply series of elevators, including Casing Elevator/Spiders,CD Series Side Door Elevator,DD Type Center Latch Elevator,DDZ Elevator,Drill Collar Elevator,Single Joint Elevator,Slip Type Elevators,Sucker Rod Elevator,etc.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> ●CD Series Side Door Type Elevators, hoisting tools for handling drill pipe, casing, tubing and drill collar in oil and gas field. <o:p></o:p> ●Casing Elevators/Spiders, for handling casing from 41/2-14 inch O.D. and with capacties of 350 and 500 tons. <o:p></o:p> ●DD Type Center Latch Elevators ,hoisting tools for handling 90°shoulder drill pipe, casing, tubing and drill collar in oil and gas field. <o:p></o:p> ●DDZ Elevators,suitable for handling 18°taper shoulder drill pipe, drilling tools and etc. <o:p></o:p> ●Drill Collar Elevators ,hoisting tools for drill collars with zip lift recess and drill collars with lift plugs in oil and gas field.<o:p></o:p> ●Single Joint Elevator ,hoisting tools for handling single tubing, casing and drill pipe with taper joint. <o:p></o:p> ●Slip Type Elevators ,handling drill pipe,casing, tubing in oil and gas field. They are especially fit to integral joint tubing, non-coupled casing, electric submersible pump and other tubular goods. <o:p></o:p> All of our elevators are designed and manufactured according to API Spec <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:chmetcnv UnitName="a" SourceValue="8" HasSpace="False" Negative="False" NumberType="1" TCSC="0" w:st="on">8A</st1:chmetcnv>-Specification for Drilling and Production Hoisting Equipment.For any question, pls contact us.<o:p></o:p>2009-12-10 15:20:42<![CDATA[Supply Oilfield Drilling tool- Wellhead Manual Tongs and Power Tongs]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-ad656/Supply-Oilfield-Drilling-tool-Wellhead-Manual-Tongs-and-Power-Tongs.html

Supply Oilfield Drilling tool- Wellhead Manual Tongs and Power Tongs

]]>OEE can supply series of wellhead manual tongs and power tongs. Such as Casing Tongs,drill pipe tongs,and well sevicing tongs.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> Manual tongs are an essential tool in oil drilling operation to fasten or remove(making up or breaking out)&nbsp; the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch jaws and handling shoulders. According to Rated Torque and Pipe Size supplied by costomers, we can choose suitablbe tongs for our customer. <o:p></o:p> Drill pipe power tong and casing power tong are an ideal wellhead tool for oil&amp;gas drilling, widely applied in making-up and breaking-out for well drilling and repairing on offshore and onshore.These tongs are combined with spinning tong and torque tong. It substitutes cathead,suspension tong and spinning rope in making-up and breaking-out. These tongs are designed and manufactured according to API 7K”Specification for Drilling Equipment”. <o:p></o:p> For any question, welcome to contact us.<o:p></o:p>2009-12-10 15:31:37<![CDATA[Oilfield Drilling tool- Wellhead Manual Tongs and Power Tongs]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-Oilfield-Drilling-tool-Wellhead-Manual-Tongs-and-Power-Tongs-ad655.html

Oilfield Drilling tool- Wellhead Manual Tongs and Power Tongs

]]>OEE can supply series of wellhead manual tongs and power tongs. Such as Casing Tongs,drill pipe tongs,and well sevicing tongs.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> Manual tongs are an essential tool in oil drilling operation to fasten or remove(making up or breaking out)&nbsp; the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch jaws and handling shoulders. According to Rated Torque and Pipe Size supplied by costomers, we can choose suitablbe tongs for our customer. <o:p></o:p> Drill pipe power tong and casing power tong are an ideal wellhead tool for oil&amp;gas drilling, widely applied in making-up and breaking-out for well drilling and repairing on offshore and onshore.These tongs are combined with spinning tong and torque tong. It substitutes cathead,suspension tong and spinning rope in making-up and breaking-out. These tongs are designed and manufactured according to API 7K”Specification for Drilling Equipment”. <o:p></o:p> For any question, welcome to contact us.<o:p></o:p>2009-12-10 15:31:37<![CDATA[Sell Drilling wellhead tools- casing slips]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-61b13/Sell-Drilling-wellhead-tools-casing-slips.html

Sell Drilling wellhead tools- casing slips

Sell Drilling wellhead tools- safety clamps

Sell Drilling wellhead tools- series manual tongs

Sell Drilling wellhead tools- series of elevators ,spider

Drilling wellhead tools- series manual tongs

Drilling wellhead tools- series of elevators ,spider

Supply Slip Inserts and Tong Dies for drilling tools

]]>OEE supplies a full line of slip inserts and tong dies, which are made of high-quality alloy steel, chemically heat-treated for surface hardness, wear-resisting, corrosion-resisting and a long service life.Casing depth usually is 0.762<?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:chmetcnv UnitName="mm" SourceValue=".889" HasSpace="False" Negative="True" NumberType="1" TCSC="0" w:st="on">-0.889mm</st1:chmetcnv>,and hardness is 52-62HRC, Max to 68HRC.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> OEE also designs and manufactures special inserts according to customer's requirement.<o:p></o:p> If you have any need, please let me know<o:p></o:p> Ms. Amy Chen&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <o:p></o:p> Sales Manager <o:p></o:p> MSN:cn_happy0910@msn.com<o:p></o:p> E-mail:abigail@china-ck.com<o:p></o:p> Skype:amychen0910 OEE supplies a full line of slip inserts and tong dies, which are made of high-quality alloy steel, chemically heat-treated for surface hardness, wear-resisting, corrosion-resisting and a long service life.Casing depth usually is 0.762<st1:chmetcnv UnitName="mm" SourceValue=".889" HasSpace="False" Negative="True" NumberType="1" TCSC="0" w:st="on">-0.889mm</st1:chmetcnv>,and hardness is 52-62HRC, Max to 68HRC.<o:p></o:p> OEE also designs and manufactures special inserts according to customer's requirement.<o:p></o:p> If you have any need, please let me know<o:p></o:p> Ms. Amy Chen&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <o:p></o:p> Sales Manager <o:p></o:p> <o:p></o:p><o:p></o:p>2009-12-10 15:34:44<![CDATA[Slip Inserts and Tong Dies for drilling tools]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-Slip-Inserts-and-Tong-Dies-for-drilling-tools-ad67e.html

Slip Inserts and Tong Dies for drilling tools

]]>OEE supplies a full line of slip inserts and tong dies, which are made of high-quality alloy steel, chemically heat-treated for surface hardness, wear-resisting, corrosion-resisting and a long service life.Casing depth usually is 0.762<?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:chmetcnv UnitName="mm" SourceValue=".889" HasSpace="False" Negative="True" NumberType="1" TCSC="0" w:st="on">-0.889mm</st1:chmetcnv>,and hardness is 52-62HRC, Max to 68HRC.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> OEE also designs and manufactures special inserts according to customer's requirement.<o:p></o:p> If you have any need, please let me know<o:p></o:p> Ms. Amy Chen&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <o:p></o:p> Sales Manager <o:p></o:p> MSN:cn_happy0910@msn.com<o:p></o:p> E-mail:abigail@china-ck.com<o:p></o:p> Skype:amychen0910 OEE supplies a full line of slip inserts and tong dies, which are made of high-quality alloy steel, chemically heat-treated for surface hardness, wear-resisting, corrosion-resisting and a long service life.Casing depth usually is 0.762<st1:chmetcnv UnitName="mm" SourceValue=".889" HasSpace="False" Negative="True" NumberType="1" TCSC="0" w:st="on">-0.889mm</st1:chmetcnv>,and hardness is 52-62HRC, Max to 68HRC.<o:p></o:p> OEE also designs and manufactures special inserts according to customer's requirement.<o:p></o:p> If you have any need, please let me know<o:p></o:p> Ms. Amy Chen&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <o:p></o:p> Sales Manager <o:p></o:p> <o:p></o:p><o:p></o:p>2009-12-10 15:34:44<![CDATA[Sell Replaceable Rubber Piston]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-817da/Sell-Replaceable-Rubber-Piston.html

]]>Pistons with replacement rubbers will run in higher-pressure, fast stroking pumps, and is resistant to oil base muds and other additives currently being used. This one piece bonded unit provides the same series of advantages, being impervious to oil and other chemicals.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> OEE also offers a full line of piston replacements including Piston Hubs, Plates, Snap rings and Renewable Rubbers.<o:p></o:p> Material of the piston hub is 40Cr forging steel,After rough process, hardness is HB283-302 or HB 255-285.After intensive process, the surface will be phosphorated or oiled according to customers demand. If it is not specified,it is phosphorated. Piston hub have sigle-acting abd doule acting. Outsaide dimension is according to customers requiement. Our standard size is D-0.08(-0.10-0),D is the liner nominal insiade dimension from <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="3" UnitName="”">3”</st1:chmetcnv>to <st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="8" UnitName="”">8”</st1:chmetcnv>.<o:p></o:p> The piston rubber is made from specially formulated compounds which are resistant to the effects of heat, oil and water. The multi-ply fabric reinforced backings used in the production of the piston rubbers provide positive, wear resistant seals.<o:p></o:p>2009-12-10 15:09:25<![CDATA[Bonded Urethane Pistons for Duplex and Triplex pump]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-Bonded-Urethane-Pistons-for-Duplex-and-Triplex-pump-817d9.html

Bonded Urethane Pistons for Duplex and Triplex pump

]]> OEE offers a full line of pistons for duplex and triplex mud pumps. All API types are available. Among these are: <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> 1. Bonded Rubber Pistons<o:p></o:p> 2. Premium Bonded Urethane Pistons<o:p></o:p> 3. Pistons with replacement rubbers<o:p></o:p> Bonded Rubber Pistons are fully interchangeable with other API standard desig0ned pistons and delivery maximum performance in almost all drilling conditions. High tensile strength, resistance to chemicals, hydrocarbons, and abrasion, long lasting service, and full interchangeability with other API designed pistons make Our Premium piston a sound value.&nbsp; <o:p></o:p> Bonded Urethane Pistons have no joints to leak. But eliminates abrasive fluids between piston and liner. The fluid expanded lip is not damaged by high pressure and fast pump strokes.&nbsp; This Fail-Safe piston seals off to greater diameter as liner wears. <o:p></o:p> Premium Bonded Urethane Pistons apply in standard environment with the longest service life of more than 500 hours, and piston hub has the longest service life of more than 450 hours.<o:p></o:p> Pistons with replacement rubbers will run in higher-pressure, fast stroking pumps, and is resistant to oil base muds and other additives currently being used. This one piece bonded unit provides the same series of advantages, being impervious to oil and other chemicals.<o:p></o:p> <o:p>&nbsp;</o:p> If you have any need, please let me know<o:p></o:p> 2009-12-10 15:42:37<![CDATA[Sell Premium Chromium Liners]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-8180d/Sell-Premium-Chromium-Liners.html

]]> Premium Chromium Liners(Bi metal liner,Hy-chorme liner )combine the strength of a forged steel out shell with the abrasion and corrosion resistance of a high chromium iron inner sleeve. These liners feature a centrifugally cast high chrome iron sleeve which is machined and heat treated to a minimum uniform bore hardness of 62RC. Each liner is machined to close tolerance to assure ease of installation and long liner life with the inside diameter of these premium liners honed to a mirror-like finish for smooth even wear during the life superior performance under tough corrosive and abrasive conditions.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> Outer Shell: 45# forged steel, tensile strength is σb ＞610MPa, yield strength is σs＞450MPa, elongation is δ＞17%, hardness is HRC180-200 Inner Sleeve: Hy-chrome forged steel (centrifugal forged). Annealing hardness is HRC≤40. Quenching hardness is HRC59-67.<o:p></o:p> 2009-9-15 15:26:17<![CDATA[Triplex mud pump Liners-bi metal liner]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-Triplex-mud-pump-Liners-bi-metal-liner-8180c.html

]]> Premium Chromium Liners(Bi metal liner,Hy-chorme liner )combine the strength of a forged steel out shell with the abrasion and corrosion resistance of a high chromium iron inner sleeve. These liners feature a centrifugally cast high chrome iron sleeve which is machined and heat treated to a minimum uniform bore hardness of 62RC. Each liner is machined to close tolerance to assure ease of installation and long liner life with the inside diameter of these premium liners honed to a mirror-like finish for smooth even wear during the life superior performance under tough corrosive and abrasive conditions.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> Outer Shell: 45# forged steel, tensile strength is σb ＞610MPa, yield strength is σs＞450MPa, elongation is δ＞17%, hardness is HRC180-200 Inner Sleeve: Hy-chrome forged steel (centrifugal forged). Annealing hardness is HRC≤40. Quenching hardness is HRC59-67.<o:p></o:p> 2009-9-28 14:27:00<![CDATA[Sell Mud Pump piston-THE DUAL-DURO PISTON]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-817eb/Sell-Mud-Pump-piston-THE-DUAL-DURO-PISTON.html

Sell Mud Pump piston-THE DUAL-DURO PISTON

]]>For Triplex Pumps Currently running in pumps using exotic muds and highest drilling pressures! Bonded construction - no joints, no leakage. Longer piston and liner life. This piston will run in higher-pressure, fast stroking pumps, and is resistant to oil base muds and other additives currently being used. This Premium Piston has been in service since 1985, providing unmatched performance under extreme drilling conditions. It’s construction is idential to that of SOUTHWEST FAIL-SAFE? piston. This one piece bonded unit provides the same series of advantages. Made of dual-durometer polyurethane, this piston is virtually impervious to oil and other chemicals.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>2009-9-15 15:19:51<![CDATA[Sell Emsco F -1300/1600 Triplex Mud Pump]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-882a3/Sell-Emsco-F-1300-1600-Triplex-Mud-Pump.html

Sell Emsco F -1300/1600 Triplex Mud Pump

]]>OEE is a large Mud Pump,Fluid End Expendables and drilling wellhead tools manufacturer in China. <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> <o:p>&nbsp;</o:p> We mainly manufacturer Emsco F-500, F-800, F-1000, F-1300, F-1600,Gardner Denver PZ-9 and National 12-P-160 mud pumps. The quality products, competitive prices, respensive service and short delivery time earn a lot of reputation for us. <o:p></o:p> <o:p>&nbsp;</o:p> F-1300 mud pump is horizontal triplex single acting piston pump. <o:p></o:p> -Rated power: 956kw (1300HP) <o:p></o:p> 1. Stroke length: 12" (<?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:chmetcnv w:st="on" UnitName="mm" SourceValue="305" HasSpace="False" Negative="False" NumberType="1" TCSC="0">305mm</st1:chmetcnv>) <o:p></o:p> 2. Rated strokes per minute: 120 <o:p></o:p> 3. Gear ratio: 3.657 <o:p></o:p> 4. Rated rotating speed: 438 r/min <o:p></o:p> 5. Diameter of suction inlet: 12" <o:p></o:p> 6. Diameter of discharge outlet: 4" <o:p></o:p> 7. Weight: 45, <st1:chmetcnv w:st="on" UnitName="lbs" SourceValue="856" HasSpace="False" Negative="False" NumberType="1" TCSC="0">856lbs</st1:chmetcnv> (<st1:chmetcnv w:st="on" UnitName="kg" SourceValue="20800" HasSpace="False" Negative="False" NumberType="1" TCSC="0">20800kg</st1:chmetcnv>) &nbsp; &nbsp; F-1600 mud pump is horizontal triplex single acting piston pump. <o:p></o:p> -Rated power: 1176kw (1600HP) <o:p></o:p> 1. Stroke length: 12" (<st1:chmetcnv w:st="on" UnitName="mm" SourceValue="305" HasSpace="False" Negative="False" NumberType="1" TCSC="0">305mm</st1:chmetcnv>) <o:p></o:p> 2. Rated strokes per minute: 120 <o:p></o:p> 3. Gear ratio: 3.657/4.206 <o:p></o:p> 4. Rated rotating speed: 438 r/min <o:p></o:p> 5. Diameter of suction inlet: 12" <o:p></o:p> 6. Diameter of discharge outlet: 4" <o:p></o:p> 7. Weight: 59, <st1:chmetcnv w:st="on" UnitName="lbs" SourceValue="745" HasSpace="False" Negative="False" NumberType="1" TCSC="0">745lbs</st1:chmetcnv> (<st1:chmetcnv w:st="on" UnitName="kg" SourceValue="27100" HasSpace="False" Negative="False" NumberType="1" TCSC="0">27100kg</st1:chmetcnv>)<o:p></o:p> <o:p></o:p>&nbsp;2009-9-28 14:37:05<![CDATA[Emsco F -1300/1600 Triplex Mud Pump]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-Emsco-F-1300-1600-Triplex-Mud-Pump-882a2.html

]]>OEE is a large Mud Pump,Fluid End Expendables and drilling wellhead tools manufacturer in China. <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> <o:p>&nbsp;</o:p> We mainly manufacturer Emsco F-500, F-800, F-1000, F-1300, F-1600,Gardner Denver PZ-9 and National 12-P-160 mud pumps. The quality products, competitive prices, respensive service and short delivery time earn a lot of reputation for us. <o:p></o:p> <o:p>&nbsp;</o:p> F-1300 mud pump is horizontal triplex single acting piston pump. <o:p></o:p> -Rated power: 956kw (1300HP) <o:p></o:p> 1. Stroke length: 12" (<?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:chmetcnv w:st="on" UnitName="mm" SourceValue="305" HasSpace="False" Negative="False" NumberType="1" TCSC="0">305mm</st1:chmetcnv>) <o:p></o:p> 2. Rated strokes per minute: 120 <o:p></o:p> 3. Gear ratio: 3.657 <o:p></o:p> 4. Rated rotating speed: 438 r/min <o:p></o:p> 5. Diameter of suction inlet: 12" <o:p></o:p> 6. Diameter of discharge outlet: 4" <o:p></o:p> 7. Weight: 45, <st1:chmetcnv w:st="on" UnitName="lbs" SourceValue="856" HasSpace="False" Negative="False" NumberType="1" TCSC="0">856lbs</st1:chmetcnv> (<st1:chmetcnv w:st="on" UnitName="kg" SourceValue="20800" HasSpace="False" Negative="False" NumberType="1" TCSC="0">20800kg</st1:chmetcnv>) &nbsp; &nbsp; F-1600 mud pump is horizontal triplex single acting piston pump. <o:p></o:p> -Rated power: 1176kw (1600HP) <o:p></o:p> 1. Stroke length: 12" (<st1:chmetcnv w:st="on" UnitName="mm" SourceValue="305" HasSpace="False" Negative="False" NumberType="1" TCSC="0">305mm</st1:chmetcnv>) <o:p></o:p> 2. Rated strokes per minute: 120 <o:p></o:p> 3. Gear ratio: 3.657/4.206 <o:p></o:p> 4. Rated rotating speed: 438 r/min <o:p></o:p> 5. Diameter of suction inlet: 12" <o:p></o:p> 6. Diameter of discharge outlet: 4" <o:p></o:p> 7. Weight: 59, <st1:chmetcnv w:st="on" UnitName="lbs" SourceValue="745" HasSpace="False" Negative="False" NumberType="1" TCSC="0">745lbs</st1:chmetcnv> (<st1:chmetcnv w:st="on" UnitName="kg" SourceValue="27100" HasSpace="False" Negative="False" NumberType="1" TCSC="0">27100kg</st1:chmetcnv>)<o:p></o:p> <o:p></o:p>&nbsp;2009-9-28 14:37:05<![CDATA[Mud Pump piston-THE DUAL-DURO PISTON]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-Mud-Pump-piston-THE-DUAL-DURO-PISTON-817ea.html

]]>For Triplex Pumps Currently running in pumps using exotic muds and highest drilling pressures! Bonded construction - no joints, no leakage. Longer piston and liner life. This piston will run in higher-pressure, fast stroking pumps, and is resistant to oil base muds and other additives currently being used. This Premium Piston has been in service since 1985, providing unmatched performance under extreme drilling conditions. It’s construction is idential to that of SOUTHWEST FAIL-SAFE? piston. This one piece bonded unit provides the same series of advantages. Made of dual-durometer polyurethane, this piston is virtually impervious to oil and other chemicals.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>2009-9-15 15:19:51<![CDATA[Sell Continental Emsco F-1000 Mud Pump]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-61aa4/Sell-Continental-Emsco-F-1000-Mud-Pump.html

]]> F-1000 single acting triplex mud pumps are authorized by Continental Emsco Company to manufacture in China and fully conform to Continental Emsco Company's technical requirement. F-1000 mud pumps are rated at longer stroke length and relatively low stroke per minute. It can increase the service life of expendable parts of fluid end assembly. The fluid end assembly mainly consists of fluid end, valve assembly, liners and pistons. Fluid end is made of forged alloy steel and three fluid ends of each pump are interchangeable. The suction valve and discharge valve of F mud pump are interchangeable. Liners use Bi metal, the sleeve is made of wear resisting cast iron. Piston and piton rod are of slide fit and sealed with rubber seal rings and are fastened with lock nuts to prevent the piston from loosing. The valve seat bores have bottom shoulders. The piston and liners are spray lubricated and cooled which allow an extended service life. The power end assembly mainly consists of frame, crankshaft, pinion shaft, crosshead and extension rod. Continuous tooth herringbone gear. One-piece alloy steel crankshaft. Replaceable crosshead guides. Frame fabricated steel plate weldment provides the optimum rigidity, high strength and lightweight. Double sealing structure for extension rod provides good sealing. Power end utilizes the combination lubricating system of forced lubrication and splashing lubrication. 2009-7-4 9:41:39<![CDATA[Sell PZ-9 Mud Pump]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-61ab2/Sell-PZ-9-Mud-Pump.html

]]>Product Description Model PZ-9 mud pump is a horizontal triplex single acting piston pump which has the advanced structure and small in size. It has the reliable performance, good exchangeability, easy maintenance. The pump consists of two main sections: Power end &amp; fluid end. Power end includes pump case pinion shaft, crankshaft, back cover, connection rod, crosshead etc. Fluid end includes valve pot assembly, valves, cylinder liners, pistons, discharge manifold and suction manifold, etc. In order to prevent the water-hammer and reduce pressure difference in the outlet side, of the pump. In order to prevent the over-pressure, there fixed a shear safty valve in the outlet side of the pump. The gears, bearings, crosshead in the power end adopt splash system and pressure lubrication system. This guarantees a good lubrication. The cylinder liners &amp; the pistons in the fluid end is cleaned and cooled by a centrifugal spray pump with lubrication water. This pump has a complete set of special tools for general maintenance &amp; repair. Technical Specifications (1)Type: Horizontal triplex single acting piston pump. (2)Rated input power 1000HP (3)Rated speed: 130SPM (4)Stroke length 9"(228.6mm) (5)Rated speed of pinion shaft 582 rpm (6)Gear ratio: 4.48: 1 (7)Valve standard: API7# (8)Suction inlet 10" (9)Discharge outlet 5 1/8" (5000PSI) (10)Overall dimension 205X94X100.5in (5200X2388X2550MM) (11)Pump weight 44050 ib(20000kg) 2009-7-4 9:50:48<![CDATA[Continental Emsco F-1000 Mud Pump]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-Continental-Emsco-F-1000-Mud-Pump-61aa3.html

]]> F-1000 single acting triplex mud pumps are authorized by Continental Emsco Company to manufacture in China and fully conform to Continental Emsco Company's technical requirement. F-1000 mud pumps are rated at longer stroke length and relatively low stroke per minute. It can increase the service life of expendable parts of fluid end assembly. The fluid end assembly mainly consists of fluid end, valve assembly, liners and pistons. Fluid end is made of forged alloy steel and three fluid ends of each pump are interchangeable. The suction valve and discharge valve of F mud pump are interchangeable. Liners use Bi metal, the sleeve is made of wear resisting cast iron. Piston and piton rod are of slide fit and sealed with rubber seal rings and are fastened with lock nuts to prevent the piston from loosing. The valve seat bores have bottom shoulders. The piston and liners are spray lubricated and cooled which allow an extended service life. The power end assembly mainly consists of frame, crankshaft, pinion shaft, crosshead and extension rod. Continuous tooth herringbone gear. One-piece alloy steel crankshaft. Replaceable crosshead guides. Frame fabricated steel plate weldment provides the optimum rigidity, high strength and lightweight. Double sealing structure for extension rod provides good sealing. Power end utilizes the combination lubricating system of forced lubrication and splashing lubrication. 2009-7-4 9:41:39<![CDATA[PZ-9 Mud Pump]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-PZ-9-Mud-Pump-61ab1.html

]]>Product Description Model PZ-9 mud pump is a horizontal triplex single acting piston pump which has the advanced structure and small in size. It has the reliable performance, good exchangeability, easy maintenance. The pump consists of two main sections: Power end &amp; fluid end. Power end includes pump case pinion shaft, crankshaft, back cover, connection rod, crosshead etc. Fluid end includes valve pot assembly, valves, cylinder liners, pistons, discharge manifold and suction manifold, etc. In order to prevent the water-hammer and reduce pressure difference in the outlet side, of the pump. In order to prevent the over-pressure, there fixed a shear safty valve in the outlet side of the pump. The gears, bearings, crosshead in the power end adopt splash system and pressure lubrication system. This guarantees a good lubrication. The cylinder liners &amp; the pistons in the fluid end is cleaned and cooled by a centrifugal spray pump with lubrication water. This pump has a complete set of special tools for general maintenance &amp; repair. Technical Specifications (1)Type: Horizontal triplex single acting piston pump. (2)Rated input power 1000HP (3)Rated speed: 130SPM (4)Stroke length 9"(228.6mm) (5)Rated speed of pinion shaft 582 rpm (6)Gear ratio: 4.48: 1 (7)Valve standard: API7# (8)Suction inlet 10" (9)Discharge outlet 5 1/8" (5000PSI) (10)Overall dimension 205X94X100.5in (5200X2388X2550MM) (11)Pump weight 44050 ib(20000kg) 2009-7-4 9:50:48<![CDATA[Sell Mud Pump Power End Parts-pinion shaft]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-61aba/Sell-Mud-Pump-Power-End-Parts-pinion-shaft.html

Sell Mud Pump Power End Parts-pinion shaft

]]>OEE supplies power end parts such as Crank shaft, pinion shaft, crosshead, bull bear, pulsation dampener, frame and so on for following triplex mud pumps:<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> EMSCO:F-500, F-800, F-1000, F-1300, F-1600<o:p></o:p> NATIONAL OILWELL::8-P-80, 9-P-100, 10-P-130, 12-P-160<o:p></o:p> GARDNER DENVER:PZ-8, PZ-9.<o:p></o:p> The products quality is in accordance with the stipulation of API (American Petroleum Institute).OEE’s high quality products perform excellent under high pressure, high temperature, and corrosion. OEE’s product equipments conform to the requirement of API as well, the processing of products is reasonable and effective.<o:p></o:p> Crosshead and crosshead guide are made of ASTM A48-83 meehanite featuring good abrasion resistance and long service life.<o:p></o:p> Pinion Shaft is made of forged alloy steel, on which a herringbone gear with the medium-hard teeth surface is machined.<o:p></o:p>2009-12-10 15:47:51<![CDATA[Sell Mud Pump Power End Parts-crank shaft]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-61abc/Sell-Mud-Pump-Power-End-Parts-crank-shaft.html

Sell Mud Pump Power End Parts-crank shaft

]]>OEE supplies power end parts such as Crank shaft, pinion shaft, crosshead, bull bear, pulsation dampener, frame and so on for following triplex mud pumps:<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> EMSCO:F-500, F-800, F-1000, F-1300, F-1600<o:p></o:p> NATIONAL OILWELL::8-P-80, 9-P-100, 10-P-130, 12-P-160<o:p></o:p> GARDNER DENVER:PZ-8, PZ-9.<o:p></o:p> The products quality is in accordance with the stipulation of API (American Petroleum Institute).OEE’s high quality products perform excellent under high pressure, high temperature, and corrosion. OEE’s product equipments conform to the requirement of API as well, the processing of products is reasonable and effective.<o:p></o:p> Crosshead and crosshead guide are made of ASTM A48-83 meehanite featuring good abrasion resistance and long service life.<o:p></o:p> Pinion Shaft is made of forged alloy steel, on which a herringbone gear with the medium-hard teeth surface is machined.<o:p></o:p>2009-12-10 15:47:51<![CDATA[Sell Mud Pump Power End Parts-crosshead and crosshead guide]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-61ac3/Sell-Mud-Pump-Power-End-Parts-crosshead-and-crosshead-guide.html

Sell Mud Pump Power End Parts-crosshead and crosshead guide

]]>OEE supplies power end parts such as Crank shaft, pinion shaft, crosshead, bull bear, pulsation dampener, frame and so on for following triplex mud pumps:<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> EMSCO:F-500, F-800, F-1000, F-1300, F-1600<o:p></o:p> NATIONAL OILWELL::8-P-80, 9-P-100, 10-P-130, 12-P-160<o:p></o:p> GARDNER DENVER:PZ-8, PZ-9.<o:p></o:p> The products quality is in accordance with the stipulation of API (American Petroleum Institute).OEE’s high quality products perform excellent under high pressure, high temperature, and corrosion. OEE’s product equipments conform to the requirement of API as well, the processing of products is reasonable and effective.<o:p></o:p> Crosshead and crosshead guide are made of ASTM A48-83 meehanite featuring good abrasion resistance and long service life.<o:p></o:p> Pinion Shaft is made of forged alloy steel, on which a herringbone gear with the medium-hard teeth surface is machined.<o:p></o:p>2009-12-10 15:07:59<![CDATA[Sell Mud Pump Power End Parts-pulsation dampener]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-61ac5/Sell-Mud-Pump-Power-End-Parts-pulsation-dampener.html

Sell Mud Pump Power End Parts-pulsation dampener

]]>OEE supplies power end parts such as Crank shaft, pinion shaft, crosshead, bull bear, pulsation dampener, frame and so on for following triplex mud pumps:<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> EMSCO:F-500, F-800, F-1000, F-1300, F-1600<o:p></o:p> NATIONAL OILWELL::8-P-80, 9-P-100, 10-P-130, 12-P-160<o:p></o:p> GARDNER DENVER:PZ-8, PZ-9.<o:p></o:p> The products quality is in accordance with the stipulation of API (American Petroleum Institute).OEE’s high quality products perform excellent under high pressure, high temperature, and corrosion. OEE’s product equipments conform to the requirement of API as well, the processing of products is reasonable and effective.<o:p></o:p> Crosshead and crosshead guide are made of ASTM A48-83 meehanite featuring good abrasion resistance and long service life.<o:p></o:p> Pinion Shaft is made of forged alloy steel, on which a herringbone gear with the medium-hard teeth surface is machined.<o:p></o:p>2009-12-10 15:47:51<![CDATA[Sell Cylinder for Triplex mud pump(fluid end module)]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-61ace/Sell-Cylinder-for-Triplex-mud-pump-fluid-end-module.html

Sell Cylinder for Triplex mud pump(fluid end module)

]]>Our plants are specialized in producing wide range of replacement parts and liners for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, etc. And other brand liners. All items are manufactured to API 7K quality standards. OEM Style Modules Mission L Modules Brewster B-1000-T/B-1100-T Mission L Brewster B-1300-T/B-1600-T Brewster B-1300-T/B-1600-T Mission L Emsco F-800, F-1000 Ellis Williams 9-W-1000 Mission L Emsco FB-1300/FB-1600 Emsco F-350/F-500/F-650 Mission L Gardner Denver PZ-7 Emsco F-800/F-1000 Mission L Gardner Denver PZ-8 Emsco FB-1300/FB-1600 Mission L Gardner Denver PZ-9 Emsco FC-1600 Mission L Gardner Denver PZ-10/PZ-11 Emsco FC-2200 Mission L Ideco T-1300/T-1600 Gardner Denver PAH Mission L National 9-P-100 Gardner Denver TEE Mission L National 10-P-130 Gardner Denver PX-11(2000 HP) 7500 psi Mission L National 12-P-160 Gardner Denver PZ-7/PZ-8/PZ-9 Mission L National 12-P-160 "New Style" Gardner Denver PZ-7/PZ-8/PZ-9 w/ Wear Plate Mission L Oilwell A-850-PT/A-1100-PT Gardner Denver PZ-10/PZ-11 Mission L Oilwell A-1400-PT/A-1700-PT Gardner Denver PZ-10/PZ-11 w/ Wear Plate Mission L Wirth TPK-1300/TPK-1600 Ideco T-500 Ideco T-800/T-1000 Ideco T-1300/T-1600 Mission "L" 7500 PSI Asemblies National 7-P-50 Mission L National 12-P-160 (7500 PSI Working Pressure) National 8-P-80 Tapr-Lok Mission L National 14-P-220 (7500 PSI Working Pressure) National 8-P-80 Fast Change Mission L Oilwell A/HD-1700-PT 7500 PSI Working Pressure National 9-P-100 Tapr-Lok National 9-P-100 Fast Change National 10-P-130 Tapr-Lok National 10-P-130 Fast Change National 12-P-160 Tapr-Lok National 12-P-160 Fast Change National 12-P-160 7500 PSI National 14-P-220 Oilwell A-850/1100/1400/1700-PT &nbsp; Heat-treated and internally hardened for high durability; available in various materials to meet a wide range of applications; standard one or two-piece configuration, with designs available for pressure of 5000psi(35.1Mpa),&nbsp; 7500psi(52.7Mpa), and 10000psi(70.3Mpa); discharge connections available on each side; suction connections on each side or front center. &nbsp;<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p> Material is 35CrMoA or 40CrMoNn alloy forged steel. To get better fiber texture, we use electric stove for second forging, or deoxidation treatment. It is forged from three directions and the forging ratio is not less than 4.0:1.0. It can not have crack, impurity, looseness, overburns, etc. And weld is not allowed. It should be confirming to the stipulation of JB/TQ252-81, and should be checked by gradeⅢ After quenching the rough module will be rough processed, then the hull hardness is HB285-330.<o:p></o:p> Mechanical property: σb ≥850MPa, σs≥670MPa, δ≥5%,ψ≥30%.<o:p></o:p> </o:p>&nbsp;2009-12-10 15:10:04<![CDATA[Sell Mud Pump Fluid End-Module parts]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-61ad1/Sell-Mud-Pump-Fluid-End-Module-parts.html

]]><?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p> <P class=MsoNormal style="MARGIN: 6pt 0cm 0pt 35.7pt; TEXT-INDENT: -17.85pt; LINE-HEIGHT: 16pt; TEXT-ALIGN: left; mso-line-height-rule: exactly; mso-pagination: widow-orphan; mso-para-margin-top: .5gd; mso-para-margin-right: 0cm; mso-para-margin-bottom: .0001pt; mso-para-margin-left: 35.7pt; mso-list: l0 level1 lfo1; tab-stops: list 36.0pt" align=left>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Premium Bonded Urethane Pistons <o:p></o:p> This one piece bonded constructed piston has no joints to leak. But eliminates abrasive fluids between piston and liner. The fluid expanded lip is not damaged by high pressure and fast pump strokes.&nbsp; This Fail-Safe piston seals off to greater diameter as liner wears.<o:p></o:p> <P class=MsoNormal style="MARGIN: 6pt 0cm 0pt 35.7pt; TEXT-INDENT: -17.85pt; LINE-HEIGHT: 16pt; TEXT-ALIGN: left; mso-line-height-rule: exactly; mso-pagination: widow-orphan; mso-para-margin-top: .5gd; mso-para-margin-right: 0cm; mso-para-margin-bottom: .0001pt; mso-para-margin-left: 35.7pt; mso-list: l0 level1 lfo1; tab-stops: list 36.0pt" align=left>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Pistons with replacement rubbers<o:p></o:p> Currently running in pumps using exotic muds and highest drilling pressures! Bonded construction - no joints, no leakage. Longer piston and liner life. This piston will run in higher-pressure, fast stroking pumps, and is resistant to oil base muds and other additives currently being used. This Premium Piston has been in service for years, providing unmatched performance under extreme drilling conditions. This one piece bonded unit provides the same series of advantages, being impervious to oil and other chemicals. Size of piston and partw <o:p> <TABLE class=MsoTableGrid style="BORDER-RIGHT: medium none; BORDER-TOP: medium none; BORDER-LEFT: medium none; BORDER-BOTTOM: medium none; BORDER-COLLAPSE: collapse; mso-border-alt: solid windowtext .5pt; mso-yfti-tbllook: 480; mso-padding-alt: 0cm 5.4pt 0cm 5.4pt; mso-border-insideh: .5pt solid windowtext; mso-border-insidev: .5pt solid windowtext" cellSpacing=0 cellPadding=0 border=1> <TBODY> <TR style="mso-yfti-irow: 0; mso-yfti-firstrow: yes"> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: windowtext 1pt solid; WIDTH: 48.3pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt" vAlign=top width=64> <o:p>&nbsp;</o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 21.5pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=29> <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:chmetcnv w:st="on" UnitName="”" SourceValue="3" HasSpace="False" Negative="False" NumberType="1" TCSC="0">3”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 43.6pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=58> 3-1/<st1:chmetcnv w:st="on" UnitName="”" SourceValue="2" HasSpace="False" Negative="False" NumberType="1" TCSC="0">2”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 21.5pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=29> <st1:chmetcnv w:st="on" UnitName="”" SourceValue="4" HasSpace="False" Negative="False" NumberType="1" TCSC="0">4”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 42.15pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=56> 4-1/<st1:chmetcnv w:st="on" UnitName="”" SourceValue="2" HasSpace="False" Negative="False" NumberType="1" TCSC="0">2”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 26.35pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=35> <st1:chmetcnv w:st="on" UnitName="”" SourceValue="5" HasSpace="False" Negative="False" NumberType="1" TCSC="0">5”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=60> 5-1/<st1:chmetcnv w:st="on" UnitName="”" SourceValue="2" HasSpace="False" Negative="False" NumberType="1" TCSC="0">2”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 27pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=36> <st1:chmetcnv w:st="on" UnitName="”" SourceValue="6" HasSpace="False" Negative="False" NumberType="1" TCSC="0">6”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=60> 6-1/<st1:chmetcnv w:st="on" UnitName="”" SourceValue="4" HasSpace="False" Negative="False" NumberType="1" TCSC="0">4”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=60> 6-1/<st1:chmetcnv w:st="on" UnitName="”" SourceValue="2" HasSpace="False" Negative="False" NumberType="1" TCSC="0">2”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 47.95pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=64> 6-3/<st1:chmetcnv w:st="on" UnitName="”" SourceValue="4" HasSpace="False" Negative="False" NumberType="1" TCSC="0">4”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 23.6pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=31> <st1:chmetcnv w:st="on" UnitName="”" SourceValue="7" HasSpace="False" Negative="False" NumberType="1" TCSC="0">7”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 42.15pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=56> 7-1/<st1:chmetcnv w:st="on" UnitName="”" SourceValue="4" HasSpace="False" Negative="False" NumberType="1" TCSC="0">4”</st1:chmetcnv><o:p></o:p></TD></TR> <TR style="mso-yfti-irow: 1"> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: windowtext 1pt solid; WIDTH: 48.3pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=64> Duplex<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 21.5pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=29> K<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 43.6pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=58> K<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 21.5pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=29> K<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 42.15pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=56> K<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 26.35pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=35> B<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=60> B<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 27pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=36> B<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=60> L<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=60> L<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 47.95pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=64> L<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 23.6pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=31> L<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 42.15pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=56> L<o:p></o:p></TD></TR> <TR style="mso-yfti-irow: 2; mso-yfti-lastrow: yes"> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: windowtext 1pt solid; WIDTH: 48.3pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=64> Triplex<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 21.5pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=29> K<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 43.6pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=58> K<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 21.5pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=29> K<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 42.15pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=56> K<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 26.35pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=35> B<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=60> B<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 27pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=36> B<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=60> L<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=60> L<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 47.95pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=64> L<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 23.6pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=31> L<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 42.15pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=56> L<o:p></o:p></TD></TR></TBODY></TABLE></o:p> </o:p>2009-12-10 15:47:51<![CDATA[Sell Mud Pump Fluid End-piston rod.pony rod,clamp]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-61ae5/Sell-Mud-Pump-Fluid-End-piston-rod-pony-rod-clamp.html

Sell Mud Pump Fluid End-piston rod.pony rod,clamp

Sell Mud pump piston-piston with replacement rubber

]]>we can offer&nbsp; premium piston with replacement rubber ,also offer a full line parts for this piston ,including piston rubber,piston hub,snap ring ,plate. <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p>&nbsp;</o:p> Material of the piston hub is 40Cr forging steel,After rough process, hardness is HB283-302 or HB 255-285.After intensive process, the surface will be phosphorated or oiled according to customers demand. If it is not specified,it is phosphorated. Piston hub have sigle-acting abd doule acting. Outsaide dimension is according to customers requiement. Our standard size is D-0.08(-0.10-0),D is the liner nominal insiade dimension from <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="3" UnitName="”">3”</st1:chmetcnv> to <st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="8" UnitName="”">8”</st1:chmetcnv>. The multi-ply fabric reinforced backings used in the production of the piston rubbers provide positive, wear resistant seals. High tensile strength, resistance to chemicals, hydrocarbons, and abrasion, long lasting service, and full interchangeability with other API designed pistons make our Premium piston a sound value.2009-12-10 15:47:51<![CDATA[Sell Mud Pump Fluid End-piston rod.pony rod,clamp]]>http://www.tradevv.com/chinasuppliers/twcxamy/offers-detail-61ae3/Sell-Mud-Pump-Fluid-End-piston-rod-pony-rod-clamp.html

Sell Drilling wellhead tools- drill collar slips

Sell Drilling wellhead tools- rotary slips

]]>OEE supplies power end parts such as Crank shaft, pinion shaft, crosshead, bull bear, pulsation dampener, frame and so on for following triplex mud pumps:<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> EMSCO:F-500, F-800, F-1000, F-1300, F-1600<o:p></o:p> NATIONAL OILWELL::8-P-80, 9-P-100, 10-P-130, 12-P-160<o:p></o:p> GARDNER DENVER:PZ-8, PZ-9.<o:p></o:p> The products quality is in accordance with the stipulation of API (American Petroleum Institute).OEE’s high quality products perform excellent under high pressure, high temperature, and corrosion. OEE’s product equipments conform to the requirement of API as well, the processing of products is reasonable and effective.<o:p></o:p> Crosshead and crosshead guide are made of ASTM A48-83 meehanite featuring good abrasion resistance and long service life.<o:p></o:p> Pinion Shaft is made of forged alloy steel, on which a herringbone gear with the medium-hard teeth surface is machined.<o:p></o:p>2009-7-4 9:55:15<![CDATA[Mud Pump Power End Parts-crosshead and crosshead guide]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-Mud-Pump-Power-End-Parts-crosshead-and-crosshead-guide-61ac2.html

Mud Pump Power End Parts-crosshead and crosshead guide

]]>OEE supplies power end parts such as Crank shaft, pinion shaft, crosshead, bull bear, pulsation dampener, frame and so on for following triplex mud pumps:<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> EMSCO:F-500, F-800, F-1000, F-1300, F-1600<o:p></o:p> NATIONAL OILWELL::8-P-80, 9-P-100, 10-P-130, 12-P-160<o:p></o:p> GARDNER DENVER:PZ-8, PZ-9.<o:p></o:p> The products quality is in accordance with the stipulation of API (American Petroleum Institute).OEE’s high quality products perform excellent under high pressure, high temperature, and corrosion. OEE’s product equipments conform to the requirement of API as well, the processing of products is reasonable and effective.<o:p></o:p> Crosshead and crosshead guide are made of ASTM A48-83 meehanite featuring good abrasion resistance and long service life.<o:p></o:p> Pinion Shaft is made of forged alloy steel, on which a herringbone gear with the medium-hard teeth surface is machined.<o:p></o:p>2009-7-4 9:57:11<![CDATA[Mud Pump Power End Parts-pinion shaft]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-Mud-Pump-Power-End-Parts-pinion-shaft-61ab9.html

]]>OEE supplies power end parts such as Crank shaft, pinion shaft, crosshead, bull bear, pulsation dampener, frame and so on for following triplex mud pumps:<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> EMSCO:F-500, F-800, F-1000, F-1300, F-1600<o:p></o:p> NATIONAL OILWELL::8-P-80, 9-P-100, 10-P-130, 12-P-160<o:p></o:p> GARDNER DENVER:PZ-8, PZ-9.<o:p></o:p> The products quality is in accordance with the stipulation of API (American Petroleum Institute).OEE’s high quality products perform excellent under high pressure, high temperature, and corrosion. OEE’s product equipments conform to the requirement of API as well, the processing of products is reasonable and effective.<o:p></o:p> Crosshead and crosshead guide are made of ASTM A48-83 meehanite featuring good abrasion resistance and long service life.<o:p></o:p> Pinion Shaft is made of forged alloy steel, on which a herringbone gear with the medium-hard teeth surface is machined.<o:p></o:p>2009-7-4 9:54:30<![CDATA[Mud Pump Power End Parts-pulsation dampener]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-Mud-Pump-Power-End-Parts-pulsation-dampener-61ac4.html

Mud Pump Power End Parts-pulsation dampener

]]>OEE supplies power end parts such as Crank shaft, pinion shaft, crosshead, bull bear, pulsation dampener, frame and so on for following triplex mud pumps:<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> EMSCO:F-500, F-800, F-1000, F-1300, F-1600<o:p></o:p> NATIONAL OILWELL::8-P-80, 9-P-100, 10-P-130, 12-P-160<o:p></o:p> GARDNER DENVER:PZ-8, PZ-9.<o:p></o:p> The products quality is in accordance with the stipulation of API (American Petroleum Institute).OEE’s high quality products perform excellent under high pressure, high temperature, and corrosion. OEE’s product equipments conform to the requirement of API as well, the processing of products is reasonable and effective.<o:p></o:p> Crosshead and crosshead guide are made of ASTM A48-83 meehanite featuring good abrasion resistance and long service life.<o:p></o:p> Pinion Shaft is made of forged alloy steel, on which a herringbone gear with the medium-hard teeth surface is machined.<o:p></o:p>2009-7-4 9:58:18<![CDATA[Mud Pump Fluid End-liner]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-Mud-Pump-Fluid-End-liner-61af1.html

]]>Our plants are specialized in producing wide range of replacement parts and liners for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, etc. And other brand liners. All items are manufactured to API 7K quality standards. OEM Style Modules Mission L Modules Brewster B-1000-T/B-1100-T Mission L Brewster B-1300-T/B-1600-T Brewster B-1300-T/B-1600-T Mission L Emsco F-800, F-1000 Ellis Williams 9-W-1000 Mission L Emsco FB-1300/FB-1600 Emsco F-350/F-500/F-650 Mission L Gardner Denver PZ-7 Emsco F-800/F-1000 Mission L Gardner Denver PZ-8 Emsco FB-1300/FB-1600 Mission L Gardner Denver PZ-9 Emsco FC-1600 Mission L Gardner Denver PZ-10/PZ-11 Emsco FC-2200 Mission L Ideco T-1300/T-1600 Gardner Denver PAH Mission L National 9-P-100 Gardner Denver TEE Mission L National 10-P-130 Gardner Denver PX-11(2000 HP) 7500 psi Mission L National 12-P-160 Gardner Denver PZ-7/PZ-8/PZ-9 Mission L National 12-P-160 "New Style" Gardner Denver PZ-7/PZ-8/PZ-9 w/ Wear Plate Mission L Oilwell A-850-PT/A-1100-PT Gardner Denver PZ-10/PZ-11 Mission L Oilwell A-1400-PT/A-1700-PT Gardner Denver PZ-10/PZ-11 w/ Wear Plate Mission L Wirth TPK-1300/TPK-1600 Ideco T-500 Ideco T-800/T-1000 Ideco T-1300/T-1600 Mission "L" 7500 PSI Asemblies National 7-P-50 Mission L National 12-P-160 (7500 PSI Working Pressure) National 8-P-80 Tapr-Lok Mission L National 14-P-220 (7500 PSI Working Pressure) National 8-P-80 Fast Change Mission L Oilwell A/HD-1700-PT 7500 PSI Working Pressure National 9-P-100 Tapr-Lok National 9-P-100 Fast Change National 10-P-130 Tapr-Lok National 10-P-130 Fast Change National 12-P-160 Tapr-Lok National 12-P-160 Fast Change National 12-P-160 7500 PSI National 14-P-220 Oilwell A-850/1100/1400/1700-PT &nbsp; Heat-treated and internally hardened for high durability; available in various materials to meet a wide range of applications; standard one or two-piece configuration, with designs available for pressure of 5000psi(35.1Mpa),&nbsp; 7500psi(52.7Mpa), and 10000psi(70.3Mpa); discharge connections available on each side; suction connections on each side or front center. &nbsp;<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p> Material is 35CrMoA or 40CrMoNn alloy forged steel. To get better fiber texture, we use electric stove for second forging, or deoxidation treatment. It is forged from three directions and the forging ratio is not less than 4.0:1.0. It can not have crack, impurity, looseness, overburns, etc. And weld is not allowed. It should be confirming to the stipulation of JB/TQ252-81, and should be checked by gradeⅢ After quenching the rough module will be rough processed, then the hull hardness is HB285-330.<o:p></o:p> Mechanical property: σb ≥850MPa, σs≥670MPa, δ≥5%,ψ≥30%.<o:p></o:p> </o:p>&nbsp;2009-7-4 10:04:52<![CDATA[Mud Pump Fluid End-Module parts]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-Mud-Pump-Fluid-End-Module-parts-61ad0.html

]]><?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p> <P class=MsoNormal style="MARGIN: 6pt 0cm 0pt 35.7pt; TEXT-INDENT: -17.85pt; LINE-HEIGHT: 16pt; TEXT-ALIGN: left; mso-line-height-rule: exactly; mso-pagination: widow-orphan; mso-para-margin-top: .5gd; mso-para-margin-right: 0cm; mso-para-margin-bottom: .0001pt; mso-para-margin-left: 35.7pt; mso-list: l0 level1 lfo1; tab-stops: list 36.0pt" align=left>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Premium Bonded Urethane Pistons <o:p></o:p> This one piece bonded constructed piston has no joints to leak. But eliminates abrasive fluids between piston and liner. The fluid expanded lip is not damaged by high pressure and fast pump strokes.&nbsp; This Fail-Safe piston seals off to greater diameter as liner wears.<o:p></o:p> <P class=MsoNormal style="MARGIN: 6pt 0cm 0pt 35.7pt; TEXT-INDENT: -17.85pt; LINE-HEIGHT: 16pt; TEXT-ALIGN: left; mso-line-height-rule: exactly; mso-pagination: widow-orphan; mso-para-margin-top: .5gd; mso-para-margin-right: 0cm; mso-para-margin-bottom: .0001pt; mso-para-margin-left: 35.7pt; mso-list: l0 level1 lfo1; tab-stops: list 36.0pt" align=left>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Pistons with replacement rubbers<o:p></o:p> Currently running in pumps using exotic muds and highest drilling pressures! Bonded construction - no joints, no leakage. Longer piston and liner life. This piston will run in higher-pressure, fast stroking pumps, and is resistant to oil base muds and other additives currently being used. This Premium Piston has been in service for years, providing unmatched performance under extreme drilling conditions. This one piece bonded unit provides the same series of advantages, being impervious to oil and other chemicals. Size of piston and partw <o:p> <TABLE class=MsoTableGrid style="BORDER-RIGHT: medium none; BORDER-TOP: medium none; BORDER-LEFT: medium none; BORDER-BOTTOM: medium none; BORDER-COLLAPSE: collapse; mso-border-alt: solid windowtext .5pt; mso-yfti-tbllook: 480; mso-padding-alt: 0cm 5.4pt 0cm 5.4pt; mso-border-insideh: .5pt solid windowtext; mso-border-insidev: .5pt solid windowtext" cellSpacing=0 cellPadding=0 border=1> <TBODY> <TR style="mso-yfti-irow: 0; mso-yfti-firstrow: yes"> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: windowtext 1pt solid; WIDTH: 48.3pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt" vAlign=top width=64> <o:p>&nbsp;</o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 21.5pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=29> <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:chmetcnv w:st="on" UnitName="”" SourceValue="3" HasSpace="False" Negative="False" NumberType="1" TCSC="0">3”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 43.6pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=58> 3-1/<st1:chmetcnv w:st="on" UnitName="”" SourceValue="2" HasSpace="False" Negative="False" NumberType="1" TCSC="0">2”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 21.5pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=29> <st1:chmetcnv w:st="on" UnitName="”" SourceValue="4" HasSpace="False" Negative="False" NumberType="1" TCSC="0">4”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 42.15pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=56> 4-1/<st1:chmetcnv w:st="on" UnitName="”" SourceValue="2" HasSpace="False" Negative="False" NumberType="1" TCSC="0">2”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 26.35pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=35> <st1:chmetcnv w:st="on" UnitName="”" SourceValue="5" HasSpace="False" Negative="False" NumberType="1" TCSC="0">5”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=60> 5-1/<st1:chmetcnv w:st="on" UnitName="”" SourceValue="2" HasSpace="False" Negative="False" NumberType="1" TCSC="0">2”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 27pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=36> <st1:chmetcnv w:st="on" UnitName="”" SourceValue="6" HasSpace="False" Negative="False" NumberType="1" TCSC="0">6”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=60> 6-1/<st1:chmetcnv w:st="on" UnitName="”" SourceValue="4" HasSpace="False" Negative="False" NumberType="1" TCSC="0">4”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=60> 6-1/<st1:chmetcnv w:st="on" UnitName="”" SourceValue="2" HasSpace="False" Negative="False" NumberType="1" TCSC="0">2”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 47.95pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=64> 6-3/<st1:chmetcnv w:st="on" UnitName="”" SourceValue="4" HasSpace="False" Negative="False" NumberType="1" TCSC="0">4”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 23.6pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=31> <st1:chmetcnv w:st="on" UnitName="”" SourceValue="7" HasSpace="False" Negative="False" NumberType="1" TCSC="0">7”</st1:chmetcnv><o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: windowtext 1pt solid; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 42.15pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt" vAlign=top width=56> 7-1/<st1:chmetcnv w:st="on" UnitName="”" SourceValue="4" HasSpace="False" Negative="False" NumberType="1" TCSC="0">4”</st1:chmetcnv><o:p></o:p></TD></TR> <TR style="mso-yfti-irow: 1"> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: windowtext 1pt solid; WIDTH: 48.3pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=64> Duplex<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 21.5pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=29> K<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 43.6pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=58> K<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 21.5pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=29> K<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 42.15pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=56> K<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 26.35pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=35> B<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=60> B<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 27pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=36> B<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=60> L<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=60> L<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 47.95pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=64> L<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 23.6pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=31> L<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 42.15pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=56> L<o:p></o:p></TD></TR> <TR style="mso-yfti-irow: 2; mso-yfti-lastrow: yes"> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: windowtext 1pt solid; WIDTH: 48.3pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=64> Triplex<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 21.5pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=29> K<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 43.6pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=58> K<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 21.5pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=29> K<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 42.15pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=56> K<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 26.35pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=35> B<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=60> B<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 27pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=36> B<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=60> L<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 45pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=60> L<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 47.95pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=64> L<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 23.6pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=31> L<o:p></o:p></TD> <TD style="BORDER-RIGHT: windowtext 1pt solid; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0cm; BORDER-LEFT: #ece9d8; WIDTH: 42.15pt; PADDING-TOP: 0cm; BORDER-BOTTOM: windowtext 1pt solid; BACKGROUND-COLOR: transparent; mso-border-alt: solid windowtext .5pt; mso-border-left-alt: solid windowtext .5pt; mso-border-top-alt: solid windowtext .5pt" vAlign=top width=56> L<o:p></o:p></TD></TR></TBODY></TABLE></o:p> </o:p>2009-7-4 10:11:09<![CDATA[Mud Pump Fluid End-piston rod.pony rod,clamp]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-Mud-Pump-Fluid-End-piston-rod-pony-rod-clamp-61ae2.html

Mud Pump Fluid End-piston rod.pony rod,clamp

Mud pump piston-piston with replacement rubber

]]>we can offer&nbsp; premium piston with replacement rubber ,also offer a full line parts for this piston ,including piston rubber,piston hub,snap ring ,plate. <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p>&nbsp;</o:p> Material of the piston hub is 40Cr forging steel,After rough process, hardness is HB283-302 or HB 255-285.After intensive process, the surface will be phosphorated or oiled according to customers demand. If it is not specified,it is phosphorated. Piston hub have sigle-acting abd doule acting. Outsaide dimension is according to customers requiement. Our standard size is D-0.08(-0.10-0),D is the liner nominal insiade dimension from <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="3" UnitName="”">3”</st1:chmetcnv> to <st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="8" UnitName="”">8”</st1:chmetcnv>. The multi-ply fabric reinforced backings used in the production of the piston rubbers provide positive, wear resistant seals. High tensile strength, resistance to chemicals, hydrocarbons, and abrasion, long lasting service, and full interchangeability with other API designed pistons make our Premium piston a sound value.2009-7-17 13:31:49<![CDATA[Drilling wellhead tools- drill collar slips]]>http://www.tradevv.com/chinasuppliers/twcxamy/products-detail/china-Drilling-wellhead-tools-drill-collar-slips-61b08.html

Drilling wellhead tools- drill collar slips