BEIJING EVERGROWRESOURCES CO.，LTD

PTFE NEEDLE FELT

2008-6-20 13:41:40

]]> Specifications︰ PTFE NEEDLE FELT color:brown,white size:<1800mm weight:600~780gram/square mter thickness:0.88~0.99mm density:0.65~0.78 g/cube cm air permeability:80~130 l/dm2/min@200pa mullen burst:25kg min break strength:N/50mm warp 500 min weft:500min elongation:warp:20% max weft:20% max Shrinkage in dry heat/250 celsius degrees for 2 hrs warp:3% max weft:3% max Application: the good filter materials under high Temp and anticorrision. the goods sealing materials under high Temp and anticorrision. Advantages︰ PTFE NEEDLE FELT color:brown,white size:<1800mm weight:600~780gram/square mter thickness:0.88~0.99mm density:0.65~0.78 g/cube cm air permeability:80~130 l/dm2/min@200pa mullen burst:25kg min break strength:N/50mm warp 500 min weft:500min elongation:warp:20% max weft:20% max Shrinkage in dry heat/250 celsius degrees for 2 hrs warp:3% max weft:3% max Application: the good filter materials under high Temp and anticorrision. the goods sealing materials under high Temp and anticorrision. Product Description PTFE NEEDLE FELT color:brown,white size:<1800mm weight:600~780gram/square mter thickness:0.88~0.99mm density:0.65~0.78 g/cube cm air permeability:80~130 l/dm2/min@200pa mullen burst:25kg min break strength:N/50mm warp 500 min weft:500min elongation:warp:20% max weft:20% max Shrinkage in dry heat/250 celsius degrees for 2 hrs warp:3% max weft:3% max Application: the good filter materials under high Temp and anticorrision. the goods sealing materials under high Temp and anticorrision.

Carbon fibre felt

2008-6-20 13:41:40

]]> Specifications︰ Type PCF and VCF Thickness (mm) 3/3.5/4/5/6/8/10/12 Width (mm) 500/600/800/1000/1200 Length (mm) 5000/10000/15000/20000 Note Above size is standard size, we can design according to customer’s request. Item PCF and VCF Carbon Content 90～95% Area Density 400～1350 g/m2 Thermal Conductivity 0.077 Cal/m.h.℃~0.085 Cal/m.h.℃ Resistivity 1.0Ω/25mm Tensile Strength Warp 8~14/ Weft 10~ 16 N/25mm Use Temp:under vacuum or inert gases protection:1800 ~ 2500 C. Advantages︰ Advantages︰ Application: Aerospace: Hot isostatic process furnaces, heat treating, sintering, brazing furnaces, autoclaves. Semi conductors: Silicon pullers, gallium arsenate producers, monocrystal furnaces. Metallizing (metal heat treating): Heat treating furnaces, sintering, brazing furnaces. Fibers Composites manufacturing: Carbonizing furnaces, graphitizing furnaces - induction or resistance tube furnaces. Ceramics: Pyrolytic depositing furnaces, sintering furnace CVD furnaces, CVR furnaces. Quartz/Fused Silica manufacturing: Melting/Sintering furnaces. Glass industry: Insulating fasteners (part of liners). Tool manufacturing: Sintering and hot pressing. Others: Furnace manufacturing: High temperature furnaces. as conducting electrode in fuel cells.

ACTIVATED CARBON FIBRE CLOTH

2008-6-20 13:41:40

]]> Specifications︰ ITEM ACFC1750 ACFC1500 ACFC1100 ACFC800 BET:square meter/g 1750 1500 1100 800 PORE VOLUME:ml/g 0.8-0.9 0.7-0.8 0.5-0.6 0.3-0.4 DENSITY: g/square meter100+-5 100+-5 100+-5 80+ - 5 WIDTH:mm 800+-50 800+-50 950+-50 1000+-50 Advantages︰ APPLICATION: *Solvent recovery * Air purification *Water purification *Decoloring of liquid *Deodoring in refrigerater *Sanitary products *NBC protection suits *Wound care products Product Description Properties *High adsorption speed capacity *Good efficiency towards pesticides and odors *Possible adaptation to condition of use. *High voluminal adsorption capacity *Regenerable *Low mineral content Specification:

CARBON FIBRE FELT ---HEAT INSULATION MATERIALS

2008-6-20 13:41:40

]]>Type PCF and VCF Thickness (mm) 3/3.5/4/5/6/8/10/12 Width (mm) 500/600/800/1000/1200 Length (mm) 5000/10000/15000/20000 Note Above size is standard size, we can design according to customer’s request. Item PCF and VCF Carbon Content 90～95% Area Density 400～1350 g/m2 Thermal Conductivity 0.077 Cal/m.h.℃~0.085 Cal/m.h.℃ Resistivity 1.0Ω/25mm Tensile Strength Warp 8~14/ Weft 10~ 16 N/25mm Use Temp:under vacuum or inert gases protection:1800 ~ 2500 C. Advantages︰ Application: Aerospace: Hot isostatic process furnaces, heat treating, sintering, brazing furnaces, autoclaves. Semi conductors: Silicon pullers, gallium arsenate producers, monocrystal furnaces. Metallizing (metal heat treating): Heat treating furnaces, sintering, brazing furnaces. Fibers Composites manufacturing: Carbonizing furnaces, graphitizing furnaces - induction or resistance tube furnaces. Ceramics: Pyrolytic depositing furnaces, sintering furnace CVD furnaces, CVR furnaces. Quartz/Fused Silica manufacturing: Melting/Sintering furnaces. Glass industry: Insulating fasteners (part of liners). Tool manufacturing: Sintering and hot pressing. Others: Furnace manufacturing: High temperature furnaces. as conducting electrode in fuel cells. Product Description PAN and Rayon carbon fibre needle felt

ACTIVATED CARBON FIBRE CLOTH

2008-6-20 13:40:49

]]>Specifications︰ ITEM ACFC1750 ACFC1500 ACFC1100 ACFC800 BET:square meter/g 1750 1500 1100 800 PORE VOLUME:ml/g 0.8-0.9 0.7-0.8 0.5-0.6 0.3-0.4 DENSITY: g/square meter100+-5 100+-5 100+-5 80+ - 5 WIDTH:mm 800+-50 800+-50 950+-50 1000+-50 Advantages︰ APPLICATION: *Solvent recovery * Air purification *Water purification *Decoloring of liquid *Deodoring in refrigerater *Sanitary products *NBC protection suits *Wound care products Product Description Properties *High adsorption speed capacity *Good efficiency towards pesticides and odors *Possible adaptation to condition of use. *High voluminal adsorption capacity *Regenerable *Low mineral content Specification:

CARBON FIBRE FELT ---HEAT INSULATION MATERIALS

2008-4-11 13:42:43

China Carbon fibre felt

2008-6-19 15:33:01

]]>Specifications︰ Type PCF and VCF Thickness (mm) 3/3.5/4/5/6/8/10/12 Width (mm) 500/600/800/1000/1200 Length (mm) 5000/10000/15000/20000 Note Above size is standard size, we can design according to customer’s request. Item PCF and VCF Carbon Content 90～95% Area Density 400～1350 g/m2 Thermal Conductivity 0.077 Cal/m.h.℃~0.085 Cal/m.h.℃ Resistivity 1.0Ω/25mm Tensile Strength Warp 8~14/ Weft 10~ 16 N/25mm Use Temp:under vacuum or inert gases protection:1800 ~ 2500 C. Advantages︰ Advantages︰ Application: Aerospace: Hot isostatic process furnaces, heat treating, sintering, brazing furnaces, autoclaves. Semi conductors: Silicon pullers, gallium arsenate producers, monocrystal furnaces. Metallizing (metal heat treating): Heat treating furnaces, sintering, brazing furnaces. Fibers Composites manufacturing: Carbonizing furnaces, graphitizing furnaces - induction or resistance tube furnaces. Ceramics: Pyrolytic depositing furnaces, sintering furnace CVD furnaces, CVR furnaces. Quartz/Fused Silica manufacturing: Melting/Sintering furnaces. Glass industry: Insulating fasteners (part of liners). Tool manufacturing: Sintering and hot pressing. Others: Furnace manufacturing: High temperature furnaces. as conducting electrode in fuel cells.

PTFE NEEDLE FELT

2008-6-19 15:27:28

]]>Specifications︰ PTFE NEEDLE FELT color:brown,white size:<1800mm weight:600~780gram/square mter thickness:0.88~0.99mm density:0.65~0.78 g/cube cm air permeability:80~130 l/dm2/min@200pa mullen burst:25kg min break strength:N/50mm warp 500 min weft:500min elongation:warp:20% max weft:20% max Shrinkage in dry heat/250 celsius degrees for 2 hrs warp:3% max weft:3% max Application: the good filter materials under high Temp and anticorrision. the goods sealing materials under high Temp and anticorrision. Advantages︰ PTFE NEEDLE FELT color:brown,white size:<1800mm weight:600~780gram/square mter thickness:0.88~0.99mm density:0.65~0.78 g/cube cm air permeability:80~130 l/dm2/min@200pa mullen burst:25kg min break strength:N/50mm warp 500 min weft:500min elongation:warp:20% max weft:20% max Shrinkage in dry heat/250 celsius degrees for 2 hrs warp:3% max weft:3% max Application: the good filter materials under high Temp and anticorrision. the goods sealing materials under high Temp and anticorrision. Product Description PTFE NEEDLE FELT color:brown,white size:<1800mm weight:600~780gram/square mter thickness:0.88~0.99mm density:0.65~0.78 g/cube cm air permeability:80~130 l/dm2/min@200pa mullen burst:25kg min break strength:N/50mm warp 500 min weft:500min elongation:warp:20% max weft:20% max Shrinkage in dry heat/250 celsius degrees for 2 hrs warp:3% max weft:3% max Application: the good filter materials under high Temp and anticorrision. the goods sealing materials under high Temp and anticorrision.

UHMWPE WEAR STRIP

2008-6-20 13:41:54

]]> Specifications︰ UHMWPE wearstrip is pared from semi finished discs with thickness from 0,5 mm to 10 mm and width from 8 mm to 360 mm. It can be delivered on coils, cut to size and if requested cut to shape. Wearstrip is used in the packaging and conveyor industrie. Advantages︰ UHMW PE possess excellent performance: 1.very high abrasion resistance 2.very high impact strength 3.very low coefficient friction and good self-lubricants properties 4.excellent chemical resistance 5.good resistance under low TEMP. 6.excellent dielectric properties

UHMW PE

2008-6-20 13:41:54

]]>Specifications︰ UHMW PE Powder Typical properties Properties UHMW PE Item Unit MIII MIV Molecular weight: X Million MIN 3.0 4.0 Density:g/cm3 : 0.935 Volatile matter %: 0.15 max (Moisture) Particle size: % 99 (Minus No.20 mesh sieve ) Temperature of deformation: 80 (Celsius degrees)min Izod impact KJ/M strength:No Bulk density: g/cm3 : 0.45 Notched impact KJ/m2 strength:: 70 min Break strength: MPa : 32~C 35 Break elongation %:200~ 300 Packing: 25Kg net in PP woven bag lined PE bag. 15MT/ 20 FCL. Advantages︰ UHMW PE possess excellent performance: 1.very high abrasion resistance 2.very high impact strength 3.very low coefficient friction and good self-lubricants properties 4.excellent chemical resistance 5.good resistance under low TEMP. 6.excellent dielectric properties Product Description UHMW PE have the excellent performance: 1.very high abrasion resistance 2.very high impact strength 3.very low coefficient friction and good self-lubricants properties 4.excellent chemical resistance 5.good resistance under low TEMP. 6.excellent dielectric properties

UHMWPE Fiber

2008-6-20 13:41:54

]]>Item Specification Strength(g/dtex) Modulus(g/dtex) Application UHF-R2400 2400DX450F ≧30 1300 Rope UHF-R3200 3200DX650F ≧28 UHF-R4800 4800DX750F ≧26 UHF-BF1300 1300DX300F ≧33 1400 Composites And Bulletproof Products UHF-BF1500 1500DX300F ≧32 UHF-BF1600 1600DX320F/480F ≧32 UHF-W800 800DX160F/240F ≧34 1650 "Weaving Fabric And thread,Fishing Line" UHF-W600 600D/150F ≧35 UHF-W400 400DX120F ≧35 UHF-F200 200DX60F ≧36 UHF-F150 150DX50F ≧36 UHF-F100 100DX30F ≧36

UHMWPE Safty products

2008-6-20 13:41:54

]]> UHMWPE Fabric and Plate UHMWPE fabric is made of high modulus, high performance polyethylene fiber which are orthogonal laid down and thermally bonded with special bulletproof binder. Features : ★ lightweight ★ soft, flexible ★ waterproof ★ outstanding UV resistant ★ moisture resistance ★ high energy absorption ★ ballistic resistance Use : It is widely used for soft bulletproof and bayonet-proof jacket, bullet-proof helmet and bulletproof sheet. Specification Code Specification Density (cm2/g) Application ER-11 1200X1600mm 170±3 46layers for 54 type lead core, 34 layers for NIJ Standard IIIA ER-12 1200X1600mm 160±3 48layers for 54 type lead core, 36 layers for NIJ Standard IIIA ER-13 1.2X50m 160±3 46layers for 54 type lead core, 36 layers for NIJ Standard IIIA Code Product Name Specification Density (cm2/g) Application ER-21 PE Bulletproof Plate 1200X1600mm 7kg/m2 54 type lead core ER-22 PE Bulletproof Plate 1200X1600mm 24kg/m2 AK47 lead core with copper jacket ER-23 PE Bulletproof insert Plate 250X300mm 1.7kg/pc AK47 lead core with copper jacket ER-24 Composite Plate of PE and Ceramic 250X300mm 2.4kg/pc NIJ Standard III ER-25 Composite Plate of PE and Ceramic 250X300mm 3.0kg/pc Riffle A.P., NIJ Standard IV High Performance Soft Safety Vest Features : ★ lightweight ★ soft, comfort ★ waterproof ★ outstanding UV resistant ★ low moisture sensibility Use : It is an idea and new material in safety products as its powerful protection capability and high specific energy absorption. Specification Code Name Style Protection Area Protection Level ER-31 Vest 0.28m2 GA141-2001 Police Standard Level II ER-32 Vest 0.28m2 GA141-2001 Police Standard Level III ER-33 Vest 0.32m2 NIJ Standard IIIA ER-34 Complete Protection 0.50m2 NIJ Standard IIIA ER-35 Complete Protection plus Groin 0.60m2 NIJ Standard IIIA

UHMWPE rope

2008-6-20 13:41:54

]]>UHMWPE Fiber Rope Diameter (mm) Lay Tenacity (ton) KG/100meter 6 12 3.0 2.5 12 12 10.0 8.5 16 12 18.0 16.0 20 12 24.0 25.0 22 12 28.0 29.0 25 12 35.0 38.0 28 12 48.0 50.0 30 12 56.0 54.0 38 12 80.0 81.0 40 12 86.0 88.0

UHMWPE SHEET

2008-6-20 13:41:40

]]> Specifications︰ SIZE 1030X2150mm 1200X2100mm 1000X3000mm 1500x3000mm 2000x3000MM 1000x4000mm Thickness:6.5~180mm Typical properties Item unit Value Tensile strength Mpa ≥24 Break elongation % ≥140 Advantages︰ APPLICATIONS： ★Abrasion Resistance and Self-lubricant : marine fender, truck liners, gearing wheels, bearing bushes, sliding elements, chute liners, bunker liners, chain wear strip, guide strips and liners. paper and cardboard Industry, suction blades, foil blades, scraper and deflecting blades etc. ★Excellent Impact Strength : lug straps, picker stickers, loom pickers, picker shields and spinning etc. ★Hygienically : food processing, slide guide mechanisms, cutting boards, rammers, rolling pins, chopping blocks and moulds etc. ★High Resistance to Chemical Solvents: pump casings, seals, spray nozzles, agitator screws, acid pump impellers and valve liners, electroplating plating drums etc. Product Description Ultra-high molecular weight polyethylene ( UHMWPE ) is an outstanding engineering plastic. It’s characterized by the following properties. FEATURES： (1)Very high abrasion resistance (2)Very high impact strength (3)Very low coefficient friction (4)Good self-lubricant (5)Excellent resistance to chemicals (6)Good resistance to low temperature. (7)Excellent dielectric properties

UHMWPE BAR

2008-6-20 13:41:40

]]> Specifications︰ Diameter mm Roundnessless mm Length mm 15 ≤3 ±1.5 1000 20 ≤3 ±1.5 1000 30 ≤3 ±1.5 1000 40 ≤3 ±1.5 1000 50 ≤5 ±2.5 1000 70 ≤5 ±2.5 1000 80 ≤5 ±2.5 1000 100 ≤6 ±3 1000 120 ≤6 ±3 1000 140 ≤6 ±3 1000 160 ≤6 ±3 1000 180 ≤6 ±3 150 200 ≤6 ±3 150 250 ≤6 ±3 150 300 ≤6 ±3 150 380 ≤6 ±3 150 400 ≤6 ±3 150 500 ≤6 ±3 150 1000~2000 ≤6 ±3 150 Main technical specification Item unit value Tensile strength Mpa ≥ 24 Break elongation % 140 Advantages︰ Feature Very high abrasion resistance Very high impact strength Very low coefficient friction Good self-lubricant property Excellent resistance to chemicals Good resistance to low temperature Excellent dielectric properties Product Description Application 1.Engineering manufacture:gear wheel, bearing bushes, sliding elements, chute liners, bunker liners, chain wear strip, guide strips and liners. 2.The paper industry:suction box covers and guiding strips. 3.The textile industry:lug straps, picker sticks, loom pickers, picker shields and spinning and mooring rope etc. 4.The food handling equipment:cutting boards, kitchen work tops and wear parts. 5.Machine construction: spray nozzles, agitator screws, acid pump impellers and valve liners. 6.Mining

UHMW PE film

2008-6-20 13:41:40

]]>Specifications︰ UHMW PE film width:100--300---1200mm thickness:0.075--0.15-1.5mm length:20--70 meter/each roll Advantages︰ UHMW PE has the excellent performance: 1.very high abrasion resistance 2.very high impact strength 3.very low coefficient friction and good self-lubricants properties 4.excellent chemical resistance 5.good resistance under low TEMP. 6.excellent dielectric properties Product Description UHMW PE have the excellent performance: 1.very high abrasion resistance 2.very high impact strength 3.very low coefficient friction and good self-lubricants properties 4.excellent chemical resistance 5.good resistance under low TEMP. 6.excellent dielectric properties

PTFE SHEET

2008-6-20 13:41:40

]]> Specifications︰ LengthXWidthXThickness mm tolerance 150×150 1.0～30 ±0.30～±0.50 250×250 1.5～30 ±0.30～±0.50 300×300 1.5～30 ±0.30～±0.50 450×450 1.5～30 ±0.30～±0.50 600×600 2～30 ±0.30～±0.50 800×800 3～30 ±0.30～±0.50 1000×1000 3～30 ±0.30～±0.50 1200×1200 3～30 ±0.30～±0.50 1000×2000 5～35 ±0.30～±0.60 Product Description PTFE molded sheet is manufactured by suspension PTFE powder. PTFE is is the best chemical resistance plastic. It has the lowest coefficient of friction of all known solid materials and a wide range of working temperature from-180+260.

PTFE AND PRODUCTS

2008-6-20 13:41:40

]]>PTFE SEMI-PRODUCTS PTFE(polytetrafluoroethylene)is the best chemical resistance plastic. It has the lowest coefficient of friction of all known solid materials and a wide range of working temperature from-180 to +260℃. APPLICATION: Resistance to chemical corrosion:Pipe hose,thin-wall beaker, reactor valve,diaphragm pump,lining of pipe-line equipment,filter etc. Resistance to aging, low friction coefficient: gland packing, pump seal, pull-rod sealing ring, mechanical seal, bearing, piston ring, guide ring, valve seat,valve clack,buffering ring etc. Good dielectric property: Wire and cable,insulating bushing of instrument,capacitor,radio insulation,transformer insulation etc. Self-cleaning property: Exterior wall coating,bridge slide block, machine guide track etc. Waterproof: Filter film,raincoat,sport suit,tabernacle etc. PTFE PLATE Length(mm) X Width(mm) Thickness(mm) Nominal tolerance 150 X 150; 250 X 250; 300 X 300 1～65 ±0.30～±0.50 450 X 450; 600 X 600 2～65 ±0.30～±0.50 800 X 800；1000 X 1000; 1200 X 1200；1500 X 1500 2～65 ±0.30～±0.50 1000 X 2000 5～35 ±0.30～±0.60 Φ100～400 1～2 ±0.30～±0.50 Φ400～1000 2～65 ±0.30～±0.50 PTEF TUBE & PIPE Specification outside diameter (mm) wall thickness (mm) Length (mm) Nominal Tolerance Nominal Tolerance 24 X 2～29.6 X 2 24～29.6 ±.65 2 ±0.30 1000～4000 32 X 2～50 X 5 32～50 ±0.80 3.5～5 ±0.30～±0.38 51 X 2～82 X 3 51～82 ±0.95 2～3 ±0.30～±0.38 90 X 3～104 X 3 90～104 ±1.10 3～3 ±0.30 129 X 3.5～204 X 4 129～204 ±1.20 3.5～4 ±0.35 PTFE BAR TYPES Diameter(mm) Length(mm) Nominal tolerance Nominal tolerance SFFBN 4,5,6 +0.48 0 100 +5.0 7,8,9 +0.58 0 SF X BN 10,13,15,16,18 +1.10 0 1000 +3.60 20,25,30 +1.30 0 35,40,45,50 +1.60 0 55,60,65,70,75,80,85,90,100 +2.00 0 100-300 +2.50 110,120,130,140,150 +2.50 0 180,200,250,270,300 +3.0 0 150 +2.0 Typical properties Item unit value Density g/cm3 2.10-2.30 Tensile strength(min) MPa 18 Ultimate elongation(min) % 230 FILLED PTFE PRODUCTS size unit value outside diameter mm 12-310 inside diameter mm 4.3-286 height mm 2-5 Note: Filler: glass fiber; carbon fiber; MoS2; graphite; PI; PPS; SiO2 ; bronze powder; polyphenyl, etc Typical properties Item unit value Density g/cm3 2.10-2.30 Tensile strength (min) MPa 15.0 Ultimate elongation (min) % 150 PTFE FILM 1. PTFE Skived Sheet/Tape Item Unit value Skived sheet Thickness 0.5-5 mm Width 900;1000;1200;1500 mm Length ≥150 M Skived tape Thickness 0.5-5 mm Width 30-500 mm length ≥5000 M Typical properties Item Unit value Density g/cm3 2.10-2.30 Tensile strength (min) MPa ≥15.0 Ultimate elongation (min) % %150 dialectic strength KV/mm 10 2. PTFE Skived Film Item Thickness Thickness tolerance Width Width tolerance Length (m) Oriented 0.015-0.040 ±10% 30-110 ±0.3 ≥50 Semi-oriented 0.030 -0.10 ±10% 30-90 ±0.3 ≥100 Non-oriented 0.020 -0.50 ±10% 30-300 ±2.0 ≥50 Typical properties Item Unit Oriented Semi-oriented Non-oriented Tensile strength MPa ≥30 ≥20 ≥10 Elongation at rupture % ≥30 ≥60 ≥100 1MHz dielectric loss tangent 2.5 X 10-4 - - 1MHz dielectric constant average 1.8-2.2 - - DC breakdown voltage (Normal temperature) KV/M average 200 lowest 40 average 60 lowest 6 average 30 THERS PTFE PACKING;PTFE EXPANDED SEALING TAPE;THREAD TAPE PTFE SEMI-PRODUCTS

CAST NYLON

2008-6-20 13:41:40

]]> Specifications︰ Size: Width X length:500 X 1000mm, 1000X1000 mm, 1220 X 2440mm THICKNESS: 5, 8，10，15，20，25，30，35，40，45，50，55，60，65，70，75，80，85，95mm Colour: natural yellow/black/green/blue Product Description MC Nylon, means Monomer casting nylon,is a kind of comprehensive used engineering plastic ,can be applied almost every industrial field. The caprolactum monomer first be melted,and added catalyst,then poured it inside molds at atmosphere pressure so as to shape in different profiles ,such as rod ,plate or tube.The molecule weight of MC nylon can reach 70,000-100,000/mol,three times than that of nylon 6/6/.Eminence mechanical properties comparing with other materials.MC nylon plays a more and more important role in the material list recommended to the more fields.

UHMW PE film

2008-6-19 15:24:53

UHMW PE powder

2008-6-19 15:29:32

UHMWPE BAR

2008-6-19 15:23:41

]]>Specifications︰ Diameter mm Roundnessless mm Length mm 15 ≤3 ±1.5 1000 20 ≤3 ±1.5 1000 30 ≤3 ±1.5 1000 40 ≤3 ±1.5 1000 50 ≤5 ±2.5 1000 70 ≤5 ±2.5 1000 80 ≤5 ±2.5 1000 100 ≤6 ±3 1000 120 ≤6 ±3 1000 140 ≤6 ±3 1000 160 ≤6 ±3 1000 180 ≤6 ±3 150 200 ≤6 ±3 150 250 ≤6 ±3 150 300 ≤6 ±3 150 380 ≤6 ±3 150 400 ≤6 ±3 150 500 ≤6 ±3 150 1000~2000 ≤6 ±3 150 Main technical specification Item unit value Tensile strength Mpa ≥ 24 Break elongation % 140 Advantages︰ Feature Very high abrasion resistance Very high impact strength Very low coefficient friction Good self-lubricant property Excellent resistance to chemicals Good resistance to low temperature Excellent dielectric properties Product Description Application 1.Engineering manufacture:gear wheel, bearing bushes, sliding elements, chute liners, bunker liners, chain wear strip, guide strips and liners. 2.The paper industry:suction box covers and guiding strips. 3.The textile industry:lug straps, picker sticks, loom pickers, picker shields and spinning and mooring rope etc. 4.The food handling equipment:cutting boards, kitchen work tops and wear parts. 5.Machine construction: spray nozzles, agitator screws, acid pump impellers and valve liners. 6.Mining

UHMWPE rope

2008-4-10 11:47:21

UHMWPE Safty products

2008-6-20 13:40:31

]]>UHMWPE Fabric and Plate UHMWPE fabric is made of high modulus, high performance polyethylene fiber which are orthogonal laid down and thermally bonded with special bulletproof binder. Features : ★ lightweight ★ soft, flexible ★ waterproof ★ outstanding UV resistant ★ moisture resistance ★ high energy absorption ★ ballistic resistance Use : It is widely used for soft bulletproof and bayonet-proof jacket, bullet-proof helmet and bulletproof sheet. Specification Code Specification Density (cm2/g) Application ER-11 1200X1600mm 170±3 46layers for 54 type lead core, 34 layers for NIJ Standard IIIA ER-12 1200X1600mm 160±3 48layers for 54 type lead core, 36 layers for NIJ Standard IIIA ER-13 1.2X50m 160±3 46layers for 54 type lead core, 36 layers for NIJ Standard IIIA Code Product Name Specification Density (cm2/g) Application ER-21 PE Bulletproof Plate 1200X1600mm 7kg/m2 54 type lead core ER-22 PE Bulletproof Plate 1200X1600mm 24kg/m2 AK47 lead core with copper jacket ER-23 PE Bulletproof insert Plate 250X300mm 1.7kg/pc AK47 lead core with copper jacket ER-24 Composite Plate of PE and Ceramic 250X300mm 2.4kg/pc NIJ Standard III ER-25 Composite Plate of PE and Ceramic 250X300mm 3.0kg/pc Riffle A.P., NIJ Standard IV High Performance Soft Safety Vest Features : ★ lightweight ★ soft, comfort ★ waterproof ★ outstanding UV resistant ★ low moisture sensibility Use : It is an idea and new material in safety products as its powerful protection capability and high specific energy absorption. Specification Code Name Style Protection Area Protection Level ER-31 Vest 0.28m2 GA141-2001 Police Standard Level II ER-32 Vest 0.28m2 GA141-2001 Police Standard Level III ER-33 Vest 0.32m2 NIJ Standard IIIA ER-34 Complete Protection 0.50m2 NIJ Standard IIIA ER-35 Complete Protection plus Groin 0.60m2 NIJ Standard IIIA

UHMWPE SHEET

2008-6-19 15:17:27

]]>Specifications︰ SIZE 1030X2150mm 1200X2100mm 1000X3000mm 1500x3000mm 2000x3000MM 1000x4000mm Thickness:6.5~180mm Typical properties Item unit Value Tensile strength Mpa ≥24 Break elongation % ≥140 Advantages︰ APPLICATIONS： ★Abrasion Resistance and Self-lubricant : marine fender, truck liners, gearing wheels, bearing bushes, sliding elements, chute liners, bunker liners, chain wear strip, guide strips and liners. paper and cardboard Industry, suction blades, foil blades, scraper and deflecting blades etc. ★Excellent Impact Strength : lug straps, picker stickers, loom pickers, picker shields and spinning etc. ★Hygienically : food processing, slide guide mechanisms, cutting boards, rammers, rolling pins, chopping blocks and moulds etc. ★High Resistance to Chemical Solvents: pump casings, seals, spray nozzles, agitator screws, acid pump impellers and valve liners, electroplating plating drums etc. Product Description Ultra-high molecular weight polyethylene ( UHMWPE ) is an outstanding engineering plastic. It’s characterized by the following properties. FEATURES： (1)Very high abrasion resistance (2)Very high impact strength (3)Very low coefficient friction (4)Good self-lubricant (5)Excellent resistance to chemicals (6)Good resistance to low temperature. (7)Excellent dielectric properties

UHMWPE WEAR STRIP

2008-6-19 15:15:28

]]>Specifications︰ UHMWPE wearstrip is pared from semi finished discs with thickness from 0,5 mm to 10 mm and width from 8 mm to 360 mm. It can be delivered on coils, cut to size and if requested cut to shape. Wearstrip is used in the packaging and conveyor industrie. Advantages︰ UHMW PE possess excellent performance: 1.very high abrasion resistance 2.very high impact strength 3.very low coefficient friction and good self-lubricants properties 4.excellent chemical resistance 5.good resistance under low TEMP. 6.excellent dielectric properties

UHMWPE Fiber

2008-4-10 11:41:43

GLASS FIBRE AND PRODUCTS

2008-4-11 13:55:44

]]>GLASS FIBER MEDIA Fiber made from melted glass that is drawn into a thin fiber less than a thousandth of an inch in diameter. The fiber may be spun into threads and woven into fabrics which suitable for many applications,such as removal of micron and submicron size particulates from both liquids and gases or used in an acoustic, electrical,or thermal insulating material. Feature: 1.Lightness, heat resisting, low thermal capacity and low thermal conductivity, soft and excellent fire-isolation. 2.Anti-heat energy and heat stability. 3.Anti-mildew, anti-insect, un-scattered and good stretching resistance. 4.Excellent anti-ageing. 5.Excellent sound absorbability, adsorption and filtering. 6.It can be cut, sewn according to requirements and it's also easy to construct. Application: 1.These products are widely used for wrapping material of all kinds of heat source (coal, electricity, oil, and gas) and heat-presentation of central air-conditioning pipelines. 2.It can be used as the materials for heat-isolation and fire -resistance. 3.It can be used as the materials for seal, sound absorption filtering and insulation. 4.Excellent material for heat-conducting, heat-presentation. 5.It can be used as materials for sound isolation, heat insulation 6.It can also be used for touching fire and all kinds of flue in which the temperature is less than 600℃. GLASS FIBER PAPER ITEM UNIT ASHRAE HEPA ULPA K 19 K29 K 39 K 49 K 59 K69 K79 Basis weight g/m2 65 65 70 70 70 70 78 Thickness mm 0.32±0.03 0.32±0.03 0.32±0.03 0.32±0.03 0.32±0.03 0.35±0.03 0.35±0.03 Filter resistance Pa ≦18 ≦25 ≦37 ≦48 ≦56 ≦68 ≦98 Filter efficiency % ≧90 ≧99 ≧99.9 ≧99.99 ≧99.999 ≧99.9999 ≧99.99999 Tensile strength N/M ≧160 ≧160 ≧200 ≧210 ≧230 ≧300 ≧400 MD N/M ≧120 ≧120 ≧130 ≧160 ≧180 ≧220 ≧250 CD Mark 0.3 micron air flow rate:0.06L/min*cm2 ITEM UNIT ASHRAE HEPA W 85 W 19 W 29 W 39 W49 W 59 W69 Basis weight g/m2 70 70 70 72 72 72 75 Thickness mm 0.35±0.03 0.35±0.03 0.35±0.03 0.37±0.03 0.37±0.03 0.37±0.03 0.38±0.03 Width mm ≤1200 Filter resistance Pa ≦9 ≦19 ≦28 ≦39 ≦49 ≦64 ≦72 Filter efficiency % ≧85 ≧90 ≧99 ≧99.9 ≧99.99 ≧99.999 ≧99.9999 Tensile strength N/M ≧800 ≧800 ≧800 ≧900 ≧900 ≧980 ≧980 MD N/M ≧500 ≧500 ≧500 ≧550 ≧550 ≧600 ≧600 CD Stiffness mN.m 0.8 0.8 0.8 1 1 1.2 1.2 Mark 0.3 micron air flow rate:0.06L/min*cm2 Packing: plastic bag/carton Other type: Glass fiber for liquid filter, air filter, water proof type, antibacterial type, water proof and antibacterial type. GLASS FIBER TISSUE ITEM UNIT SPECIFICATION PB-30 TBH-30 TBMH-1 TBM-30 TBG Tensile strength KN/M radial 60 55 40 45 45 KN/M latitudinal 60 55 40 40 45 Initial resistance Pa 55 50 80 100 120 Precision μm 60 60 40 20 5 Filter efficiency % 85 85 95 99 99.9 Width mm 600 , 1000 Use Air and gases filter, liquid filter, gas oil separation and filter part of the machine (compressor). Packing:200㎡/roll GLASS FIBER FELT ITEM UNIT SPECIFICATION GFF-03 GFF-05 GFF-10 Thickness mm > 3 > 5 > 10 Weight (g/m2) 500-600 700-800 900-1000 Heat-resisting (℃) 600 600 600 Thermal conductivity (kcal/m.h.c) 0.055 0.0457 0.028 Tensile strength (N/cm2) 400 500 500 Width (±50mm) 1000~2000 1000~2000 1000~2000 Thickness: 3/4/5/6/8/10/12/15mmm

PTFE AND PRODUCTS

2008-4-11 13:51:54

PTFE SHEET

2008-6-19 15:21:23

]]>Specifications︰ LengthXWidthXThickness mm tolerance 150×150 1.0～30 ±0.30～±0.50 250×250 1.5～30 ±0.30～±0.50 300×300 1.5～30 ±0.30～±0.50 450×450 1.5～30 ±0.30～±0.50 600×600 2～30 ±0.30～±0.50 800×800 3～30 ±0.30～±0.50 1000×1000 3～30 ±0.30～±0.50 1200×1200 3～30 ±0.30～±0.50 1000×2000 5～35 ±0.30～±0.60 Product Description PTFE molded sheet is manufactured by suspension PTFE powder. PTFE is is the best chemical resistance plastic. It has the lowest coefficient of friction of all known solid materials and a wide range of working temperature from-180+260.

CAST NYLON

2008-4-11 13:58:00