Shenzhen ERI Technology Limited

Sell SMD Tantalum Capacitor

2009-10-20 10:23:49

]]>

Solid tantalum chip capacitors are designed and manufactured with the demanding requirements of surface mount technology in mind.

There are A, B, C, D, E, S six case available. This product is compatible with automatic pick and place equipment.

Suitable for military equipment and computer,mobile phone and other electronic products.

It meets the requirements of EIA 535BAAC and QC300801 standard.

Sell Dipped Tantalum Capacitor

2009-10-20 10:23:49

]]>

Small units with high stable performance.

Lower current leakage and dissipation factor, stable frequency, temperature and long life.

Suitable for military equipments, computer, telephone and other electronic products.

It meets IEC384-15-3 and GB7215-87 standard.

Sell Radial Leads MLCC

2009-10-20 10:23:58

]]>

Wide capacitance, temperature , voltage and tolerance range; Industry sizes;

Tape and Reel available for auto placement; a lot of leads type available.

Sell Axial Leads MLCC

2009-10-20 10:23:58

]]>

Wide capacitance, temperature , voltage and tolerance range; Industry sizes;.

Tape and Reel available for auto placement.

Sell SMD MLCC

2009-10-20 10:23:49

]]>

NPO (COG) Ultra stable ClassⅠdielectric, with negligible dependence of electrical properties on temperature, voltage, frequency and time, Used in circuits requiring stable performance.
X7R Stable Class Ⅱdielectric, with predictable change of properties with temperature, voltage, frequency and time. Used 5 Uas blocking, coupling, by-passing and frequency discriminating elements. This dielectric is ferroelectric and offers higher capacitance ranges than ClassⅠ.

Y5V(Z5U) General purpose Class Ⅱdielectric with highest dielectric constant and greater variation of properties with temperature and test conditions. Very high capacitance per unit volume and suited for application as well as filtering, transient suppression blocking, and charge storage application.

Sell Dipped Electrolytic Capacitor

2009-10-20 10:23:49

]]>

Feature:

Temperature Range:-40～+105℃

Rated Voltage:10～450VDC

Capacitance Range:1～4700uF

Sell SMD Alumium Electrolytic Capacitor

2009-10-20 10:23:49

]]>

Voltage Range:4~100V

Capacitance Range:0.1~6800uF

Capacitance Tolerance:±20% at 120Hz,20℃

Load Life:2000 hours

Comply with the RoHS directive

Operation Temperature Range:-40~ +85℃

Sell Metallization Polyester Film Capaciotor

2009-10-20 10:23:49

]]>

Small Size with good selfhealing effect.Impulse Strength with high impact.

Suitable for DC and Low Pulse Circuit. E.g. Low Frequency Filter, Blocking of DC and By-pass. Please do not use in the AC, filtering, Oscillation and high frequency circuits.

It meets GB7332（IEC384-2）standard.

Sell Metallization Polypropylene Film Capacitor

2009-10-20 10:23:49

]]>

Small Size with good selfhealing effect.

Very low loss at high frequency, the low temperature in changing with high impact.

Have well voltage proof features under the high frequency AC current.

Suitable for high Frequency, DC, AC and Impulsion High Current conditions. e.g. Lamps and Lanterns.

It meets GB10190 （IEC384-16）standard.

Sell Anti-interferen capacitors MPX X2

2009-10-20 10:23:49

]]>

Small Size with good,selfhealing effect .

Have strong,moisture resistance and well proof voltage.

Suitable for over line, to inhibit the Surge, fit for AC circuits etc.

It meets UL1414（EN132400），GB/T14472-1998（IEC384-14） standard.

Sell THC2W-High-energy mix of tantalum capacitors

2009-10-20 10:23:58

Sell THC1W-High-energy mix of tantalum capacitors

2009-10-20 10:23:58

Sell THCL-High-energy mix of tantalum capacitors

2009-10-20 10:23:58

Sell THC2-High-energy mix of tantalum capacitors

2009-10-20 10:23:58

Sell THC1-High-energy mix of tantalum capacitors

2009-10-20 10:23:58

Sell CAK31- reliability index of the gas seal non-solid electrolyte tantalum capacitors

2009-10-20 10:23:58

Sell CAK35-A reliability index of the gas seal non-solid electrolyte tantalum capacitors

2009-10-20 10:23:58

]]> Silver shell packaging, gas seal, cylindrical, axial leads, coats insulated casing, there is polarity<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> Stable electrical performance, high reliability, long life and good storage stability<o:p></o:p> Applicable to aviation, aerospace, satellite, radar, weapons and other high-reliability requirements of military electronic equipment, DC, pulse and low-ripple circuit.<o:p></o:p> Standard:GJB733A-96,QJ/PWV20001-2000<o:p></o:p>   Tantalum Capacitors for radar.

Sell CAK38-Reliable indicators of a fixed gas seal non-solid electrolyte tantalum capacitors

2009-10-20 10:23:58

Sell CAK39-Reliable indicators of a fixed gas seal non-solid electrolyte tantalum capacitors

2009-10-20 10:24:06

Sell CAK81-Reliable indicators of a fixed gas seal non-solid electrolyte tantalum capacitors

2009-10-20 10:24:06

]]> The product is metallic silver shell, glass insulator package sealed non-solid electrolyte tantalum capacitors, axial leads, metal for the anode, electrical performance, excellent stability, high reliability, long life and good storage stability, electrical properties parameters and MIL-C-39006/9D the CLR69 Conformal close to rated voltage range, nominal-capacity; applicable to aviation, aerospace, satellites, missiles, sea (ground) cables, and communications with the reliability requirements of military electronic equipment The DC and pulse circuits. Products meet the national military standard GJB733A-96 "are reliable indicators of the total non-solid electrolyte tantalum capacitors norms" as well as detailed specifications QJ/PWV128-2002.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> Main Technical Performance:<o:p></o:p> Operating temperature range:-55℃- 125℃(> 85 ℃, the applied voltage is the use of category)<o:p></o:p> Capacitance Tolerance:±10%，±20%   Tantalum Capacitors for Defense.<o:p></o:p>

Sell GCA30-Reliable indicators of a fixed gas seal non-solid electrolyte tantalum capacitors

2009-10-20 10:24:06

Sell GCA35-Gas seal non-solid electrolyte tantalum capacitors

2009-10-20 10:24:06

]]> The product is metallic silver shell, glass insulator package sealed non-solid electrolyte tantalum capacitors, axial leads, metal for the anode, has a good resistance to harsh environments and storage performance. GCA35-based post-secondary technical agreement in line with QZJ840628 7 and SJ20207-92 detailed specification requirements, product performance, quality, stable and reliable, suitable for communications, aerospace electronic equipment, or pulsating DC circuits.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> Main Technical Performance:<o:p></o:p> Operating temperature range:-55℃- 125℃(> 85 ℃, the applied voltage is the use of category)<o:p></o:p> Capacitance Tolerance:±10%，±20%<o:p></o:p> Room temperature leakage current:Io ≤ 0.0008CRUR (uA) or 1uA (whenever is greater)<o:p></o:p> High-temperature (85 ℃, 125 ℃) Leakage current: Io ≤ 0.006CRUR(uA) or 6uA (whenever is greater)   Tantalum Capacitors for Defense.

Sell CA31-Gas seal non-solid electrolyte tantalum capacitors

2009-10-20 10:24:06

Sell CA32- 200℃Large-capacity non-solid electrolyte tantalum capacitors

2009-10-20 10:24:06

]]>This product is for high-capacity non-solid electrolyte tantalum capacitors, multi-core parallel structure, and product performance is stable and reliable, lead to elicit the same, there are polar, vertical installation, for DC or pulsating DC circuit. Are consistent with above-standard QJ/PWV79-2022.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> Main Technical Performance:<o:p></o:p> Operating temperature range:-55℃- 125℃(> 85 ℃, the applied voltage is the use of category)<o:p></o:p> Capacitance Tolerance:±10%，±20%<o:p></o:p> Room temperature leakage current:Io ≤ 0.001CRUR (uA) <o:p></o:p> High-temperature (85 ℃, 125 ℃) Leakage current: Io ≤ 0.008CRUR(uA) <o:p></o:p>

Sell CA33A-High-pressure non-solid electrolyte tantalum capacitors

2009-10-20 10:24:06

]]> The product metal shell, series structure, cylinder, and axial two kinds of one-way leads to way, shell coated insulating layer, high-pressure polar tantalum capacitors, the product excellent electrical properties, stability, reliability, leakage current, high-pressure , wide operating temperature to meet the special requirements of high-voltage circuits for communications, instrumentation and other special requirements to electronic equipment in DC or pulse circuit QJ/PWV133-2002 products meet standard requirements.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> Main Technical Performance:<o:p></o:p> Operating temperature range:-55℃- 125℃(> 85 ℃, the applied voltage is the use of category)<o:p></o:p> Capacitance Tolerance:±10%，±20%<o:p></o:p> Room temperature leakage current:Io ≤ 0.001CRUR (uA) or 1uA (whenever is greater)<o:p></o:p> High-temperature (85 ℃, 125 ℃) Leakage current: Io ≤ 0.008CRUR(uA) <o:p></o:p>   Tantalum Capacitors for Military.

Sell CA81-Gas seal non-solid electrolyte tantalum capacitors

2009-10-20 10:24:06

Sell CAK-Reliable of solid electrolyte tantalum capacitors

2009-10-20 10:24:06

]]> The product is a tubular metal casing sealed solid tantalum capacitors, axial leads are polarity, electrical properties and stability, high reliability, long life and reliability requirements applies to military electronic equipment. CAK-type products meet the national military standard GJB63B-2001 "are reliable indicators of solid electrolyte tantalum capacitors general norms" and GJB63A-91 detailed regulations.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> Main Technical Performance:<o:p></o:p> Operating temperature range:-55℃- 125℃(> 85 ℃, the applied voltage is the use of category)<o:p></o:p> Capacitance Tolerance:±10%，±20%<o:p></o:p> Room temperature leakage current:Io ≤ 0.01CRUR (uA) or 0.5uA (whenever is greater)<o:p></o:p>   Tantalum Capacitors for Defense.

Sell CAK70-A reliability index of the bipolar nature of solid electrolyte tantalum capacitors

2009-10-20 10:24:06

]]> The product pipe-shaped metal gas seal axial leads, bipolar solid electrolyte tantalum capacitors. Stable electrical performance, high reliability, long life and reliability requirements applies to military electronic equipment in the polar transformation pack DC and pulsating circuits. Meet the national military standard GJB63B-2001 "are reliable indicators of solid electrolyte tantalum capacitors general norms" and the industry military standard SJ202208-92 Detailed specification requirements.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> Main Technical Performance:<o:p></o:p> Operating temperature range:-55℃- 125℃(> 85 ℃, the applied voltage is the use of category)<o:p></o:p> Capacitance Tolerance:±10%，±20%<o:p></o:p> Room temperature leakage current:Io ≤ 0.02CRUR (uA) or 1uA (whenever is greater)<o:p></o:p> Tantalum Capacitors for Defense.

Anti-interferen capacitors MPX X2

2009-5-14 15:31:26

]]>

Small Size with good,selfhealing effect .

Have strong,moisture resistance and well proof voltage.

Suitable for over line, to inhibit the Surge, fit for AC circuits etc.

It meets UL1414（EN132400），GB/T14472-1998（IEC384-14） standard.

Axial Leads MLCC

2009-5-14 15:19:02

]]>

Wide capacitance, temperature , voltage and tolerance range; Industry sizes;.

Tape and Reel available for auto placement.

CA31-Gas seal non-solid electrolyte tantalum capacitors

2009-10-9 22:11:50

CA32- 200℃Large-capacity non-solid electrolyte tantalum capacitors

2009-10-9 22:13:38

CA33A-High-pressure non-solid electrolyte tantalum capacitors

2009-10-9 22:15:10

CA81-Gas seal non-solid electrolyte tantalum capacitors

2009-10-9 22:16:35

CAK31- reliability index of the gas seal non-solid electrolyte tantalum capacitors

2009-10-9 22:00:23

CAK35-A reliability index of the gas seal non-solid electrolyte tantalum capacitors

2009-10-9 22:01:19

]]> Silver shell packaging, gas seal, cylindrical, axial leads, coats insulated casing, there is polarity<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> Stable electrical performance, high reliability, long life and good storage stability<o:p></o:p> Applicable to aviation, aerospace, satellite, radar, weapons and other high-reliability requirements of military electronic equipment, DC, pulse and low-ripple circuit.<o:p></o:p> Standard:GJB733A-96,QJ/PWV20001-2000<o:p></o:p>   Tantalum Capacitors for radar.

CAK38-Reliable indicators of a fixed gas seal non-solid electrolyte tantalum capacitors

2009-10-9 22:02:53

CAK39-Reliable indicators of a fixed gas seal non-solid electrolyte tantalum capacitors

2009-10-9 22:04:38

CAK70-A reliability index of the bipolar nature of solid electrolyte tantalum capacitors

2009-10-9 22:18:58

]]> The product pipe-shaped metal gas seal axial leads, bipolar solid electrolyte tantalum capacitors. Stable electrical performance, high reliability, long life and reliability requirements applies to military electronic equipment in the polar transformation pack DC and pulsating circuits. Meet the national military standard GJB63B-2001 "are reliable indicators of solid electrolyte tantalum capacitors general norms" and the industry military standard SJ202208-92 Detailed specification requirements.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> Main Technical Performance:<o:p></o:p> Operating temperature range:-55℃- 125℃(> 85 ℃, the applied voltage is the use of category)<o:p></o:p> Capacitance Tolerance:±10%，±20%<o:p></o:p> Room temperature leakage current:Io ≤ 0.02CRUR (uA) or 1uA (whenever is greater)<o:p></o:p> Tantalum Capacitors for Defense.

CAK81-Reliable indicators of a fixed gas seal non-solid electrolyte tantalum capacitors

2009-10-9 22:05:59

]]> The product is metallic silver shell, glass insulator package sealed non-solid electrolyte tantalum capacitors, axial leads, metal for the anode, electrical performance, excellent stability, high reliability, long life and good storage stability, electrical properties parameters and MIL-C-39006/9D the CLR69 Conformal close to rated voltage range, nominal-capacity; applicable to aviation, aerospace, satellites, missiles, sea (ground) cables, and communications with the reliability requirements of military electronic equipment The DC and pulse circuits. Products meet the national military standard GJB733A-96 "are reliable indicators of the total non-solid electrolyte tantalum capacitors norms" as well as detailed specifications QJ/PWV128-2002.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> Main Technical Performance:<o:p></o:p> Operating temperature range:-55℃- 125℃(> 85 ℃, the applied voltage is the use of category)<o:p></o:p> Capacitance Tolerance:±10%，±20%   Tantalum Capacitors for Defense.<o:p></o:p>

CAK-Reliable of solid electrolyte tantalum capacitors

2009-10-9 22:17:55

Dipped Electrolytic Capacitor

2009-5-14 15:20:57

]]>

Feature:

Temperature Range:-40～+105℃

Rated Voltage:10～450VDC

Capacitance Range:1～4700uF

Dipped Tantalum Capacitor

2009-5-14 15:16:45

]]>

Small units with high stable performance.

Lower current leakage and dissipation factor, stable frequency, temperature and long life.

Suitable for military equipments, computer, telephone and other electronic products.

It meets IEC384-15-3 and GB7215-87 standard.

GCA30-Reliable indicators of a fixed gas seal non-solid electrolyte tantalum capacitors

2009-10-9 22:08:04

GCA35-Gas seal non-solid electrolyte tantalum capacitors

2009-10-9 22:09:37

]]> The product is metallic silver shell, glass insulator package sealed non-solid electrolyte tantalum capacitors, axial leads, metal for the anode, has a good resistance to harsh environments and storage performance. GCA35-based post-secondary technical agreement in line with QZJ840628 7 and SJ20207-92 detailed specification requirements, product performance, quality, stable and reliable, suitable for communications, aerospace electronic equipment, or pulsating DC circuits.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> Main Technical Performance:<o:p></o:p> Operating temperature range:-55℃- 125℃(> 85 ℃, the applied voltage is the use of category)<o:p></o:p> Capacitance Tolerance:±10%，±20%<o:p></o:p> Room temperature leakage current:Io ≤ 0.0008CRUR (uA) or 1uA (whenever is greater)<o:p></o:p> High-temperature (85 ℃, 125 ℃) Leakage current: Io ≤ 0.006CRUR(uA) or 6uA (whenever is greater)   Tantalum Capacitors for Defense.

Metallization Polyester Film Capaciotor

2009-5-14 15:29:40

]]>

Small Size with good selfhealing effect.Impulse Strength with high impact.

Suitable for DC and Low Pulse Circuit. E.g. Low Frequency Filter, Blocking of DC and By-pass. Please do not use in the AC, filtering, Oscillation and high frequency circuits.

It meets GB7332（IEC384-2）standard.

Metallization Polypropylene Film Capacitor

2009-5-14 15:30:44

]]>

Small Size with good selfhealing effect.

Very low loss at high frequency, the low temperature in changing with high impact.

Have well voltage proof features under the high frequency AC current.

Suitable for high Frequency, DC, AC and Impulsion High Current conditions. e.g. Lamps and Lanterns.

It meets GB10190 （IEC384-16）standard.

Radial Leads MLCC

2009-5-14 15:18:10

]]>

Wide capacitance, temperature , voltage and tolerance range; Industry sizes;

Tape and Reel available for auto placement; a lot of leads type available.

SMD Alumium Electrolytic Capacitor

2009-5-14 15:22:52

]]>

Voltage Range:4~100V

Capacitance Range:0.1~6800uF

Capacitance Tolerance:±20% at 120Hz,20℃

Load Life:2000 hours

Comply with the RoHS directive

Operation Temperature Range:-40~ +85℃

SMD MLCC

2009-5-14 15:19:49

]]>

SMD Tantalum Capacitor

2009-5-14 15:15:21

]]>

Solid tantalum chip capacitors are designed and manufactured with the demanding requirements of surface mount technology in mind.

There are A, B, C, D, E, S six case available. This product is compatible with automatic pick and place equipment.

Suitable for military equipment and computer,mobile phone and other electronic products.

It meets the requirements of EIA 535BAAC and QC300801 standard.

THC1-High-energy mix of tantalum capacitors

2009-10-9 21:58:24

THC1W-High-energy mix of tantalum capacitors

2009-10-9 21:54:26

THC2-High-energy mix of tantalum capacitors

2009-10-9 21:57:37

THC2W-High-energy mix of tantalum capacitors

2009-10-9 21:53:14

THCL-High-energy mix of tantalum capacitors

2009-10-9 21:55:38

Sell Network Resistor

2009-10-20 10:23:49

]]>Industry standard size, miniaturization, high-density assembly

Excellent moisture proof and antisepsis

High reliability, long usage-life

Free design, production according to the consumers’ requirement

Application to such household and communication appliances as color TV, air conditioner,Fax machine and the like

Sell SMD Resistor

2009-10-20 10:23:49

]]>

Miniature and light weight

Suit for reflow and wave flow solder

Stable electrical capability,high reliability

Low assembly cost,suit for automatic SMT equipment

Superior mechanical and frequency characteristics

According with RoHS standard

Network Resistor

2009-5-14 15:33:16

]]>Industry standard size, miniaturization, high-density assembly

Excellent moisture proof and antisepsis

High reliability, long usage-life

Free design, production according to the consumers’ requirement

Application to such household and communication appliances as color TV, air conditioner,Fax machine and the like

SMD Resistor

2009-5-14 15:34:04

]]>

Miniature and light weight

Suit for reflow and wave flow solder

Stable electrical capability,high reliability

Low assembly cost,suit for automatic SMT equipment

Superior mechanical and frequency characteristics

According with RoHS standard