Stator Coil Pre-forming Machine

(1) Technical data

Stator ID：30~140mm

Stator OD：Max. 210mm

Stack length：20~200mm

Winding overhang range：15--60mm

Power：380V/50/60HZ  1.5KW

Machine weight：about 700kg

Machine dimension：L920*W1120*H2500mm

(2) Main components

PLC：Mitsubishi(Produced in Dalian)

Oil pump：Jingyuan

Sensor：Autonics

Button/switch：Schneider

Other electric elements：Delixi/Schneider

(3) Machine main function and characteristic

1. This machine adopts whole hydraulic system and PCL program.

2. This machine can adjust the forming stack length by changing washer.

3. Form the OD, and ID of the stator core coil without forming hang over to facilitate operator to put phase isolator.

4. After forming, there is no copper wire enamel broken or wire snap.

5. Changing a new tooling is easy and convenient.

6. Both slot paper and wedge should not be damaged or turned over. The stator should not be deformation or stator lamination should not be upward. There is no wire enamel broken.

7. Production capacity ≤15s/set (exclude loading/unloading time)

8. Primary qualification rate ≥99%, after rework, the rate ≥99.9%

9. This machine adopts safety grating protection system. Operator need to stand when operating.

10. Machine adopts two hands simultaneously start button to ensure safety.