BMW D-CAN GT1 and INPA

BMW D-CAN GT1 and INPA                                                                                                                                              

 INPA/EDIABAS, GT1, SSS.
(Diagnose, coding / programming).
Complete support of all blocks of management on all models BMW since 1998!
Supports reports:
1. High-speed D-CAN and PT-CAN (500 kbit/s)
2. Low - speed K-CAN (100 kbit/s)
3. Standard BMW reports (BMW-OBD-interface).
D-CAN It is used for diagnostics of the following models:
- E60, E61 since 03/2007
- E83 since 09/2006
- E81, E87 since 03/2007
- E90, E91, E92, E93 since 03/2007
- E70 (new X5)
- R56 (new MINI)
Work with 1995 for 1998 (except for old blocks of management using L-line).
work With 1998 for 03/2007 years on all models.
 
<install:>
 
0. install DiagHead.exe  <if your OS is XP, you need install .net framework 2.0 software>
1. install VMware-player-2.5.0-118166_PConline
2. copy inpa all file to c:\. NOTE:If you want try the new version, you can install <inpa ediabas from inpa ediabas.rar>, but they are not 100% tested!
3. copy gt1 software to c:  (note: selet one of them between <dis55+tis+bmw mini> and <dis55+tis2007.12+dis44(coding+progman)>)
4. edit system path, add c:\ediabas\bin\ path (see syspath.jpg for help)
5. connect USB cable and instal FTDI drivers
6. install d-can usb device(CDM 2.04.06 WHQL Certified.rar)
7. Record computer COM port number (see number.jpg for help) <if the COM port number is larger than 4, you should change it to 1 or 2 or 3>
8. Setup "Latensy Timer = 1" (see L_timer.jpg for help)
9. Set c:\ediabas\hardware\obd\obd.ini PORT=comX （computer USB-COM port number）
10. copy C:\EDIABAS\Hardware\obd\OBD.ini to C:\windows
11. Run c:\ediabas\hardware\obd\OBDSetup.exe
12. Restart Windows
13. change main network Adapter ip to 192.168.68.1, please dont change VMware network Adapter ip
14. open C:\ediabas\bin\EDIABAS.ini, change the Port=6801 if needed
 
<run>
inpa  c:\inpa\bin\inpaload.exe

gt1(need set network ip address )
   1. run c:\ediabas\bin\IFHSrv32.exe
   2. run DiagHead.exe
   3. select diaghead <run> menu
   4. run vwware
   5. open c:\gt1\DIS 55 English\DIS 55 English.vmdk()
 
   <first time run gt1, you need do this, gt1 will need find & steup d-can interface>
 
   6. click <administration> button (in gt1 software main screen)
   7. click <connection setup> button
   8. click <connecting> button
   9. click <menu>-><end>--<quit> buttion (to back to main screen)
 
    to work correctly with the device, in VMPlayer set Ethernet1, Ethernet2, Ethernet3 to "Connected", "Bridged". master PC network settings must be the following:
     - IP 192.168.68.1
     - subnet mask 255.255.255.0
     - gateway 192.168.68.1
     note:
        if notebook not connect network cables, please insert the Loopback cables (the net cable end)
        please dont change Ethernet2, Ethernet3 ip address
 
        Don't use USB Extender cable, directly connect interface to computer.
        you need close your Firewall software,if you not close Firewall , gt1 not can connect you diaghead
       if your inpa not is v6.47 version,maybe you need repacde c:\EDIABAS\bin for use our bin.zip
       if you think support new ecu for inpa,you need repacde c:\EDIABAS\ecu  for use our ecu.zip