Lexia 3

Product Name: Lexia 3
PP2000 V22.14 Lexia-3 V45 Citroen/Peugeot Diagnostic

Lexia 3 Latest Version:
1.Diagbox :Diagnosis Tool from PSA :V05.02 
   Acti-Diag    V 4.76.01       
 
  Data:V 12.14          
 ------------------------
  DDC:V 2.09.09              
 ------------------------
  eDiag:V 4.0.3.2.55    
 ------------------------
  PP2000:V 600.15        
 ------------------------
  Lexia:V 500.14        
 ------------------------
  PPD:V 3.1.43.9
 ------------------------
2.lexia46
3.pp2000 10A/23.25
4.PROXIA3_43

Lexia 3 Language Inculding:
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, <st1:country-region w:st="on">Hungary, Greek, Czech

PP2000/Lexia-3 Interface works for both Citreon and Peugeot.It compatible with most of Citreon and Peugeot cars from 1995.But not good for Peugeot 307 and Citreon C5.It support read identification,read fault codes,clear fault codes,auto-scan etc.Have multiple language for choose.
PP2000/LEXIA-3 Interface works for both Citreon and Peugeot!

Lexia 3 Compatible Vehicles:

It compatible with Citreon cars including, C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on.But please pay attention,according to our customer's experience,this item can not works good at C5 new models.
It compatible with  most Peugeot cars from 1995,but it can not work good with Peugeot 307 after 2004 year.
If customer have this two types of cars,please pay attention.please check with us first before purchase.
Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Lexia 3 Supported functions:
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

The following diagnostic functions are supported:
1.Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2.Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3.Clear fault codes
This function clears all stored fault codes and other diagnostic information.
4.Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5.Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6.Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

Hardware and software requirements:
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.

Package includes:
1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable
1pc x 16pin to Clip Cable
1pc x Instruction for Installation and Activation DVD for PP2000

you may interest in:auto key programmer,odometer correction tool,Launch X431,Launch X431 Master,Launch X431 diagun,Launch X431 scanner,Launch X431 GX3,Autoboss v30 scanner,Autoboss scanner,Benz Key Maker,BMW Scanner,ad900 key programmer,SBB key programmer,Auto Diagnostic Tool，Auto Key Programmer，Odometer Correction，Auto Code Reader，Diagnostic PC Interface，ECU Chip Tuning，Ecu Programmer，VAG Scanner，BMW Scanner，Airbag Reset，Opel Diagnostic Tools，ELM327，K+CAN Commander