group nameAuto Key Programmer
Min Order1 piece
payment method
update timeFri, 23 Aug 2013 22:10:00 GMT
Min Order1 piece
New Released Mercedes Benz AK500+ Key Programmer with EIS SKC Calculator With Database Hard Disk
Support models:
Mercedes-Benz: W220/W220 "Keyless Go" W208/W210/W220/W203/W215/W230/W209/W219/W211/W230/W215 EEPROM(M95xxx)
Volkswagen Audi: MPC(MPC555/556,MPC561/562,MPC563/564),external Flash(MB58BW016,29BL802C,AM29BDD160,S29CD016,DE28F800 etc.) and external EEPROM(M95xxx)
Specification:
1.Features:
Q: I can not find 95xxx from A500+. Because I don't have 95 adapter to connect to 95xxx on the AK500+ main unit, i can not read the ECU and ESM data. From the video, there is someone telling that the 95xxx is on the package box, but i have not found it. Please provide me a 95xxx chip adapter, or i can not use it normally.
A: Now AK500+ SKC does’t have 95xxx chip adapter, you don’t need to remove ECU with SKC. Only old AK500 has 95XXX. It is easier to use for AK500+ with SKC calculator than AK500 with 95xxx chip adapter.
Q: How to write keys with AK500+ KEY Programmer?
A: You can write keys steps by steps as following:
1.Remove EIS
2.Open EIS
3.Connect the EIS according to the connction picture
4.Read EIS
5.Save the data
6.Open SKC key bulider file
7.Download EIS Dump File
8.Generate Key file
9.Put blank key to IR socket
10.Write key
Q: How to make new Benz key?
A: It is different for making new benz keys and old mecedes benz keys, please do it as following steps:
-Removed EIS
-Desolder CPU 1 from EIS
-Read data from EIS - CPU 1
-Save
-Close AK500+
-Open SKC Calculator
-Dowload the bin file
-Select keys for calculating result
-Calculate keys (About 7-10 minutes)
-Close SKC Calculator
-Open AK500+ again
-Click Step 4 to write the key option via IR
-Insert the key
-Load key dump file
-Click on programming
Q: AK500+ key programmer can do used benz keys? how to erase the data from the old mercedes keys? can AK500+ do this?
A: There are some old keys which can not be reused again. If your old benz key can be reused, first you need to remove the chip from the key, then you can erase the data by renewing the key.
Q: How to read EIS DATA?
A: First you need imopt EIS data to SKC, then get the key information, after writing the key data to the new keys, then you can start the car.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.