GS400 code reader

GS400 code reader

Wider vehicle coverage with CAN Protocol support
Displays DTC's / Generic Codes P0, P2, P3, U0 and Manufacturer Specific Codes P1, P3, and U1
Displays OBD2 monitor and I/M Readiness Status
Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that support Mode 9
Reset Check Engine Lights
Determines the malfunction indicator lamp (MIL) status
Displays Total # of Codes Retrieved
Identifies and Displays Pending Codes
Code Definitions Displayed on unit Screen
Detects OBD-II Freeze Frame Information
Memory / Battery backup for off-car review and analysis
Unit can be flash updated with a standard Windows PC
Highly reliable and accurate
Easy-to-read crystal-clear backlit large LCD display
Easy to use with one plug-in
Stand-alone unit with no need for an additional laptop computer to operate
Safely communicates with the on-board computer
Detachable and replaceable 16-Pin OBD2 Cable

Included Communication Protocols:
C.A.N. (Controller Area Network)
ISO 9141
J1850PWM
J1850VPW
KWP 2000 ISO 14230-4
EKWP 2000

Specifications
Display: 128 x 64 backlit LCD display
Operating Temperature: 0 to 50¡ãC (-32 to 122 F¡ã)
Storage Temperature: -20 to 70¡ãC (-4 to 158 F¡ã)
External Power: 10.0 to 15.5 Volts provided via vehicle battery
Internal Power: 9V Cell
Dimensions:

Length Width Height 
200 mm (7.8¡¡À) 90 mm (3.5¡¡À) 34mm (1.3¡¡À)
NW: 0.60 Kg(1.3lb), GW: 0.80Kg(1.8lb)
STANDARDS: FCC Certified
INDIVIDUAL PACKING CASE (10in x8.0in x 3.0in);

MAINTENANCE:

2 year warranty, full life maintenance