group nameSucker Rod Pump
Min Order1 piece
brand nameSJ
update timeMon, 04 Jun 2012 01:33:09 GMT
Min Order1 piece
It’s suitable for deep well since the barrel only bears pressure from outside and does not bear tensile load and its clearance change is small. But it is not recommended for sandy wells since there is no ciuculation for the well fluid around the outside of the barrel so pump may become stuck in the tubing by packed sand.
Technical specifications
Specification | Nominal Pump Bore(in) | Plunger Length(ft)
| Max.O.D.(mm) | Rod(in) | Tubing(in) | Pump Constant(m3/d) | Stroke (m) |
20-112RHBC | 1.12 | 4-6 | 46.7 | 3/4 | 2-3/8 | 0.92 | ≤7.5 |
20-112RHBM | 44.7 | ||||||
20-125RHBC | 1.25 | 47.5 | 3/4 | 2-3/8 | 1.14 | ||
20-125RHBM | 44.7 | ||||||
25-150RHBC | 1.50 | 59.5 | 3/4 | 2-7/8 | 1.64 | ||
25-150RHBM | 55.6 | ||||||
25-175RHBC | 1.75 | 59.5 | 3/4 | 2-7/8 | 2.24 | ||
25-175RHBM | 55.6 | ||||||
30-225RHBC | 2.25 | 72.1 | 3/4 | 3-1/2 | 3.69 | ||
30-225RHBM | 71.7 |
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.