superbright waterproof hid hi lo xenon bulb HID kits H4 6000K 8000K 10000K for MG

waterproof hid hi/lo xenon bulb HID kits

H4 6000K 8000K 10000K  

1. HID kit ; Waterproof

2. HID kit ; low defective rate

3. HID kit ; Factory Price 

4. HID kit ; Long warranty

Details for 9007 hid hi/lo

1)HID kit is wide range of acceptable input voltage (AC 9~16V). 
2)Low startup electric current for HID(3A), easy to  startup, without initiating the alert indicator HID light . 
3)HID kit obtains stable brightness quickly within 5 seconds 

upon cold boot, more safe for driving. 
4) HID kit in LIWIN With excellent digital microchip made in

 USA means more stable performance and low defective rate.

Technic details of 9007 hi lo hid

Bulbs for HID kit you can choose

*Single bulb : H1, H3, H4, H6, H7, H8, H9, H10, H11, H13, 

H27,9004(HB1), 9005(HB3), 9006(HB4), 

*D Series: D1S,D1R,D1C, D2S, D2R,D2C,D3S,D3R,

D3C,D4S,D4R,D4C,

*High/low (bi-xenon): H4 (Hi/Lo), H6,(Hi/Lo),H13 (Hi/Lo), 

9004(Hi/Lo), 9007(Hi/Lo)

Why Choose LIWIN 9007 hi/lo hid bulb

•LIWIN HID kit adopt high-power digital CUP programming controller, integrated better stable analog circuit and the top quality electronic parts

•HID kit of LIWIN have the professional ASIC programming controller which is the same type as HELLA, with the top quality electronic parts.

•Raw Material with LIWIN HID kit Were imported from Germany and USA , MIRCROCHIP CPU & MICROCHIP IR,ON-LM,ST-STP.

•Our HID kit adopt multi-integrated circuit, the failure rate was decreased to the least.(<0.1%)

•HID in our company has more constant power supply, match the common quality bulbs .

•Use LIWIN HID kit will have impact start-up, the lowest electromagnetic interference.

•Higher output power and power efficiency with our HID kit .

•All of our HID kit have pure aluminum shell, the best heat dissipation performance.

•LIWIN HID kit advantage: the widest input voltage range, apply to install the bus and the cars.

•Our HID kit are well insulated, waterproof and quakeproof performance.

•All of our products with HID kit Had passed the ISO9002 quality system, the CE,  E-MARK, ROHS.

Packing detailswith hid hi/lo bulb

2pcs of HID kit xenon bulb 

2pcs of HID kit xenon ballast 

All necessary accessories for HID kit installation

Installation of hid hi/lo bulb kit

1, Please open the HID hood and take off the assembly of the 

headlights on the two side(left and right).

2, Open up the back cap of the HID assembly of headlights.

3, Drill a hole in the middle of the back cap with a 25mm cutter.

4, Take down the plastic cover surrounding the HID head lamp.

5, Put the HID kit head lamp into the headlights.

6, First plug the HID kit bulbs wiring harness into the rubber 

base and then put it into the back cap of assembly. After that, 

please shut the headlight shield tightly.

Quality Control with LIWIN HID kit

1) 6 hours continuous working aging test. HID kit

2) Connection circuit protection test.  HID kit

3) Short circuit protection test. HID kit

4) Lack of voltage protection test. HID kit

5) Over voltage protection test. HID kit

6) Lash light concussion test. HID kit

7) Quakeproof capability test. HID kit

8) Cold/warm boot test. HID kit

9) Polarity protection test HID kit

10) EMC anti-jamming test <0.1% HID kit

Color temperature of HID kit bulbs

Payment and Delivery terms for LW HID kit

...