3NB-1300 mud pump

1.Input power:1300Hp
2.Axle rated speed :438r/min
3.Weight:20.8 t
4.Type:Triplex single role

1.Input power:1300Hp
2.Axle rated speed :438r/min
3.Weight:20.8 t
4.Type:Triplex single role

Parameters

Model	Type	Input power	Axle rated speed (r/min)	Rated speed pump	stroke length	Gear ratio
3NB-1300	Triplex single role	1300Hp	438	120Stroke /min	305	3.657
Weight excluding large pulley and air packages		Suction Pipe Diameter	Discharge Pipe Diameter	Dimension(mm)	Weight
18.2t		254-305mm	123mm	4600×2750×2525	20.8 t

 

Speed Diesel (to/ min)	Pump speed (Stroke/min)	Displacement(L/S)
		φ140	φ150	φ160	φ170	φ180
1500	120	28.16	32.32	36.18	41.52	46.54
1400	112	26.28	30.17	34.32	38.75	43.44
1300	104	24.40	28.01	31.87	36.00	40.34
1200	96	22.53	25.86	29.42	33.21	37.24
1100	88	20.65	23.70	26.97	30.44	34.13
1000	80	18.77	21.55	24.52	27.68	31.03
Rated pump pressure(MPa)	/	31	27	24	21	19
Mechanical efficiency by 90% volumetric efficiency by 100%

 

 

 

 

 

 

 

 

 

 

 

 

Features
1.Power End
The power pump shell is the structure of steel plate welding and has been tested with its intensity by authority. The crankshaft is a composed structure of straight shaft and eccentric wheel. Its airproof part of elastic ripple tube has been awarded a patent certificate by the state. The transmission gear is of medium hard side to improve the enduring ability.
2.Fluid End
Liquid power side valve is of whole forging with a vertical structure, the volume interstice is minimum. The k1:6 wimble surface has been processed by roll pressing and therefore is improved significantly with its cooperative precision. The water supply valve is fastened reliably and conveniently. The valve box and the base holes conform to APL standard.
3.Design Features
Parameters were optimized and the stroke has been lengthened appropriately to reduce the number of strokes to enhance the intake performance of the pump and for longer endurance of the relatively weak parts. The pumps are widely used in oil fields and other industrial and mining enterprises, well drilling and well maintenance, etc. The serial products are produced strictly by SY5138 standards established by the Petroleum Industry Ministry of China and factory-leaving experiments are carried out accordingly.