group nameSolids Control System
Min Order1 piece
update timeMon, 08 Apr 2013 00:36:37 GMT
Processing Type Forging
Warranty free for one year
After-sales Service Provided Engineers available to service machinery overseas
application oilfield solid control
certification API
Operation simple and easy
Min Order1 piece
Kill manifold
1. Application
In case of increase in well head pressure, the kill manifold can provide a means of pumping heavy drilling fluid into the well to balance bottom hole pressure so that well kick and blowout can be prevented. In this case, by using blow down lines connected to the kill manifold, the increasing well head pressure also can be released directly
for bottom hole pressure release, or water and extinguishing agent can be injected into the well by means of the kill manifold. The check valves on the kill manifold only allow injection of kill fluid or other fluids into the well bore
throughthemselves, but do not allow any backflow so as to perform the kill operation or other operations.
2. Structure
The kill manifold consists of check valves, gate vales, pressure gauges and pipelines. The one end of the kill
manifold is connected to the drilling spool and the other end is connected to the pump. The kill manifold
and choke manifold are both designed to API 16C and can be used together. The kill manifold is available from 14MPa, 21MPa, 35MPa and 70MPa pressure ratings.
3. Operating Requirements
(1) Working pressure of all pipelines, gate valves and check valves shall be compatible with that of the BOP stack used.
(2) The kill manifold is not intended to be used as common lines for pouring drilling fluid.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.