Water Pipe(hot dipped galvanized)

Water Pipe(hot dipped galvanized)
Size: 1/2"-8"
Thickness:1.4-8.75mm
Length:3-12meter
Standard: ASTM A5

Water Pipe(hot dipped galvanized)
Size: 1/2"-8"
Thickness:1.4-8.75mm
Length:3-12meter
Standard: ASTM A53,BS1387,EN39

Water Pipe(hot dipped galvanized)

DIAMETER:DN15-DN200

O.D: 19-219.1mm

Wall Thickness:1.4-9mm

Length: 3 to 12 m

Grade:Q195 Q215 Q235 ST37 ST52

Delivery status:Hot dipped galvanized

Zinc coating: 280g/m2

Ends:Screwed both ends and complete with one solid coupling(socket)

Usage: Electrical,water transportation and conduct pipe

LIFE : More than 10 years

 

Galvanized Scaffolding Steel Pipe

Made to Standard En39:

Type			Outside Dia. of Black /Galvanized Tube						Weight of Black/ Galvanized Tube
	Size		Minimum		Maximum		Wall thickness		Plain ends		Pieces
	NB(mm)	inches	mm	inches	mm	inches	mm	inches	Kg/ft	Kg/meter	Per bundle
3	40	11/2	47.8	1.882	48.8	1.921	3.2	0.126	1.090	3.56	61
4	40	11/2	47.8	1.882	48.8	1.921	4.0	0.157	1.332	4.37	50

1. TOLERANCE
:a) On Specified OD + 0.5mm (Ovality 0.5mm)
:b) The Inside Diameter of tubes shall allow insertion of a guage of 37.7mm dia for a minimum length of 200mm.
:c) On Wall thickness -10%
:d) The mass deviation on a single tube shall not exceed -7.5% of the specified mass.
2. ENDS
: Cut cleanly and nominally square with the axis of the tube and free from excessive burrs.
3. PROPERTIES
:a) Chemical (Maximum) C - 0.20%, SI - 0.05%, MN - 1.40%, P - 0.04%, S - 0.045%, AL - Min. 0.02%.
:b) Mechanical = UTS - 340 to 520 N/mm2, YS - 235 N/mm2 (minimum) & %Elongation on 5.65 S0 - 24% (minimum).
4. FLATTENING TEST WELD AT 90 DEGREES (COLD)
a) For weld : Distance between the platens, measured under load is not greater than 75% of the OD of tube.
b) For Material :Distance Between the platens, measured under load is not greater than 60% of the OD of tube.
5. STRAIGHTNESS
: 1 in 500 (In 1 meter it should not exceed 3mm).
6. ZINC COATING
: Minimum local coating thickness on the outside surface 40 microns.
(GALVANIZING)
7. MARKING
: a) We can emboss mill sign "EN 39 UTP 3 or 4." online at every one meter interval over the length of pipe.
b) We can do online stencilling as per customer needs.
8. PACKING
: Hexagonal type.
9. MILL TEST CERTIFICATE
:We can issue a MTC, certifying that the tubes supplied comply with this Standard.

 

 

 

Save our paper, Save our environment ,You can ask yourself ''Do you really need a hard copy?''---This is our mission. ---TIANJIN RONGXIN STEEL CO.,LTD.