Galvanized pipe
- US $850.00
10 - 40,000 metric ton
- US $450.00
40,001 - 999,999 metric ton
group nameTYT STEEL SCAFFOLDING
-
Min Order10 metric ton
brand nameTYTSTEEL
payment methodT/T, L/C, D/P D/A, MoneyGram, Credit Card, Westem Union, Escrow
-
update timeTue, 22 Apr 2014 14:02:18 GMT
Paramtents
Standard BS, GB, ASTM
Standard BS 1387, BS 1139, BS 4568, BS EN 39, GB/T 3091-2001, ASTM A53-2007
Grade 16Mn, ST35-ST52, Q195-Q345
Grade 16Mn, St37, St52, St42, St45, Q235, Q345, Q195, Q215
Thickness 0.045 - 3 inch
Section Shape Round
Outer Diameter 21.3 - 273.1 mm
Secondary Or Not Non-secondary
Application Structure Pipe
Technique Hot Rolled
Certification ISO9001-2000
Surface Treatment Galvanized
Special Pipe Thick Wall Pipe
Alloy Or Not Non-alloy
OD 21.3-273.1mm
WT 0.045-3inch
Commudity GI PIPE
Length TO your oder
Application Stucture pipe
Packging & Delivery
Min Order10 metric ton
Briefing
OD 21.3-273.1mm
WT 0.045-3inch
Length to your order
Application Stucture pipe
Detailed
Galvanized pipe
standerd ASTM A53 BS1387 GB/T3091-2001
Grader Q195 Q235 Q345 Q215
OD 21.3-273.1mm
WT 0.045-3inch
Length to your order or 5.6-6m
Application Stucture pipe
| 1. TOLERANCE | ||||||||
| :a) On Specified OD + 0.5mm (Ovality 0.5mm) | ||||||||
| :b) The Inside Diameter of ubes shall allow insertion of a guage of 37.7mm dia for a minimum length of 200mm. | ||||||||
| :c) On Wall thickness -10% | ||||||||
| :d) The mass deviation on a single tube shall not exceed -7.5% of the specified mass. | ||||||||
| 2. ENDS | ||||||||
| : Cut cleanly and nominally square with the axis of the tube and free from excessive burrs. | ||||||||
| 3. PROPERTIES | ||||||||
| :a) Chemical (Maximum) C - 0.20%, SI - 0.05%, MN - 1.40%, P - 0.04%, S - 0.045%, AL - Min. 0.02%. | ||||||||
| :b) Mechanical = UTS - 340 to 520 N/mm2, YS - 235 N/mm2 (minimum) & %Elongation on 5.65 S0 - 24% (minimum). | ||||||||
| 4. FLATTENING TEST WELD AT 90 DEGREES (COLD) | ||||||||
| a) For weld : Distance between the platens, measured under load is not greater than 75% of the OD of tube. | ||||||||
| b) For Material :Distance Between the platens, measured under load is not greater than 60% of the OD of tube. | ||||||||
| 5. STRAIGHTNESS | ||||||||
| : 1 in 500 (In 1 meter it should not exceed 3mm). | ||||||||
| 6. ZINC COATING | ||||||||
| : Minimum local coating thickness on the outside surface 40 microns. | ||||||||
| (GALVANIZING) | ||||||||
| 7. MARKING | ||||||||
| : a) We can emboss mill sign "EN 39 UTP 3 or 4." online at every one meter interval over the length of pipe. | ||||||||
| b) We can do online stencilling as per customer needs. | ||||||||
| 8. PACKING | ||||||||
| : Hexagonal type. | ||||||||
| 9. MILL TEST CERTIFICATE | ||||||||
| :We can issue a MTC, certifying that the tubes supplied comply with this Standard. | ||||||||
You need a product
Related Searches
You May Like
- Nearest port for product export
- TIANJIN XINGANG PORT, QINGDAO PORT, SHANGHAI PORT, NINGBO PORT
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, CIP, CPT, DDP, DDU
- Acceptable payment methods
- T/T, L/C, D/P D/A, MoneyGram, Credit Card, Westem Union, Escrow