10 - 40,000 ton
40,001 - 999,999 ton
group nameTYT STEEL SCAFFOLDING
Min Order10 ton
brand nameTYTSTEEL
payment methodT/T, L/C, D/P D/A, MoneyGram, Credit Card, Westem Union, Escrow
update timeTue, 22 Apr 2014 14:23:28 GMT
Standard BS, GB, DIN, ASTM, API
Standard BS 1387, BS 1139, BS 4568, BS EN 39, GB/T 3091-2001, GB/T 13793-1992, DIN EN 10305, DIN EN 10025, ASTM A53-2007, API 5L
Grade 16Mn, A53-A369, ST35-ST52, Q195-Q345
Grade 16Mn, A53(A,B), St37, St52, St42, Q235, Q195, Q215
Thickness 0.8 - 10 mm
Section Shape Round
Outer Diameter 21.3 - 273.1 mm
Secondary Or Not Non-secondary
Application Fluid Pipe
Technique ERW
Certification ISO 9001-2008
Surface Treatment Galvanized
Special Pipe Thick Wall Pipe
Alloy Or Not Non-alloy
color offwhite
thickness 0.8-10mm
OD 21.3-273.1mm
length 3.5-12.05m
usage water/gas/structure pipe
Min Order10 ton
Galvanized Pipe
thickness: 0.75-10mm
meterial standard GB700-88
color: off white
alloy or not: non
Apply field: Water/Oil/Gas/furniture pipe/scaffolding pipe
price competitive price
.
TOLERANCE | ||||||||
:a) On Specified OD + 0.5mm (Ovality 0.5mm) | ||||||||
:b) The Inside Diameter of ubes shall allow insertion of a guage of 37.7mm dia for a minimum length of 200mm. | ||||||||
:c) On Wall thickness -10% | ||||||||
:d) The mass deviation on a single tube shall not exceed -7.5% of the specified mass. | ||||||||
2. ENDS | ||||||||
: Cut cleanly and nominally square with the axis of the tube and free from excessive burrs | ||||||||
3. PROPERTIES | ||||||||
:a) Chemical (Maximum) C - 0.20%, SI - 0.05%, MN - 1.40%, P - 0.04%, S - 0.045%, AL - Min. 0.02%. | ||||||||
:b) Mechanical = UTS - 340 to 520 N/mm2, YS - 235 N/mm2 (minimum) & %Elongation on 5.65 S0 - 24% (minimum). | ||||||||
4. FLATTENING TEST WELD AT 90 DEGREES (COLD) | ||||||||
a) For weld : Distance between the platens, measured under load is not greater than 75% of the OD of tube. | ||||||||
b) For Material :Distance Between the platens, measured under load is not greater than 60% of the OD of tube. | ||||||||
5. STRAIGHTNESS | ||||||||
: 1 in 500 (In 1 meter it should not exceed 3mm). | ||||||||
6. ZINC COATING | ||||||||
: Minimum local coating thickness on the outside surface 40 microns. | ||||||||
(GALVANIZING) | ||||||||
7. MARKING | ||||||||
: a) We can emboss mill sign "EN 39 UTP 3 or 4." online at every one meter interval over the length of pipe. | ||||||||
b) We can do online stencilling as per customer needs. | ||||||||
8. PACKING | ||||||||
: Hexagonal type. | ||||||||
9. MILL TEST CERTIFICATE | ||||||||
:We can issue a MTC, certifying that the tubes supplied comply with this Standard. |
Hot Dipped Galvanized Steel Pipe Proceed Flow Chart
Keep us in mind, connect with us!
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.