10 - 40,000 metric ton
40,001 - 999,999 metric ton
group nameTYT STEEL SCAFFOLDING
Min Order10 metric ton
brand nameTYTSTEEL
payment methodT/T, L/C, D/P D/A, MoneyGram, Credit Card, Westem Union, Escrow
update timeTue, 22 Apr 2014 14:24:46 GMT
Standard BS, GB, ASTM
Standard BS 1387, BS 4568, BS EN 39, GB/T 3091-2001, ASTM A53-2007
Grade Q195-Q345
Grade Q235, Q345, Q195, Q215
Thickness 1.2 - 6.5 mm
Section Shape Round
Outer Diameter 21.3 - 219 mm
Secondary Or Not Non-secondary
Application Fluid Pipe
Technique ERW
Certification ISO9001-2000
Surface Treatment Galvanized
Special Pipe Thick Wall Pipe
Alloy Or Not Non-alloy
Zinc coating 250-400 g/m2
Min Order10 metric ton
Greenhouse Galvanized Steel Pipe
Standard: ASTM A53,BS1387,EN39
Size: 1/2"-8"
Thickness:1.2-6.5mm
Length:3-8meter
Greenhouse Galvanized Steel Pipe |
Diameter: | DN15-DN200 |
O.D: | 21.3-219.1mm |
Wall Thickness: | 1.2-6.5mm |
Length: | 3 to 8 meter |
Material Grade: | Q195,Q215,Q235,ST37,ST52 |
Standard: | GB/T3091,ASTM A53,BS1387,EN39 |
Surface Treatment: | Hot dipped galvanized |
Zinc Coating Content: | 250-400 g/m2 |
Ends: | Screwed both ends,one side with coupling,the other with plastic cap |
Usage: | Greenhouse structure,water and gas transportation,scaffolding |
Life: | More then 10 years |
Reference Standard En39:
Type |
|
| Outside Dia. of Black /Galvanized Tube |
|
| Weight of Black/ Galvanized Tube | |||||
| Size | Minimum | Maximum | Wall thickness | Plain ends | Pieces | |||||
| NB(mm) | inches | mm | inches | mm | inches | mm | inches | Kg/ft | Kg/meter | Per bundle |
3 | 40 | 11/2 | 47.8 | 1.882 | 48.8 | 1.921 | 3.2 | 0.126 | 1.090 | 3.56 | 61 |
4 | 40 | 11/2 | 47.8 | 1.882 | 48.8 | 1.921 | 4.0 | 0.157 | 1.332 | 4.37 | 50 |
1. TOLERANCE
:a) On Specified OD + 0.5mm (Ovality 0.5mm)
:b) The Inside Diameter of tubes shall allow insertion of a guage of 37.7mm dia for a minimum length of 200mm.
:c) On Wall thickness -10%
:d) The mass deviation on a single tube shall not exceed -7.5% of the specified mass.
2. ENDS
: Cut cleanly and nominally square with the axis of the tube and free from excessive burrs.
3. PROPERTIES
:a) Chemical (Maximum) C - 0.20%, SI - 0.05%, MN - 1.40%, P - 0.04%, S - 0.045%, AL - Min. 0.02%.
:b) Mechanical = UTS - 340 to 520 N/mm2, YS - 235 N/mm2 (minimum) & %Elongation on 5.65 S0 - 24% (minimum).
4. FLATTENING TEST WELD AT 90 DEGREES (COLD)
a) For weld : Distance between the platens, measured under load is not greater than 75% of the OD of tube.
b) For Material :Distance Between the platens, measured under load is not greater than 60% of the OD of tube.
5. STRAIGHTNESS
: 1 in 500 (In 1 meter it should not exceed 3mm).
6. ZINC COATING
: Minimum local coating thickness on the outside surface 40 microns.
(GALVANIZING)
7. MARKING
: a) We can emboss mill sign "EN 39 UTP 3 or 4." online at every one meter interval over the length of pipe.
b) We can do online stencilling as per customer needs.
8. PACKING
: Hexagonal type.
9. MILL TEST CERTIFICATE
:We can issue a MTC, certifying that the tubes supplied comply with this Standard.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.