group nameLab Powder Coating gun
Min Order1 piece
brand nameCOLO powder coating machine
modelcolo-800Dt-B
payment methodT/T, Western Union, paypal
update timeFri, 29 Mar 2024 18:57:09 GMT
Voltage 110v or 220v
Use powder coating testing
Type of spray gun corona
Delivery time 2 days
Brand COLO
Min Order1 piece
small powder coating system for hobby or small coating job.
1. Turn on the gun control unit
2. Press the desired application key (Preset or Program Mode)
on the control unit (see gun control unit operating instructions)
3. Pick the gun up and point it at a grounded object, at a distance
of approx. 20 cm
4. Press the powder gun trigger
- The display for current and high voltage on the control
unit shows the actual value
Cleaning the manual powder gun
Frequent cleaning of the gun serves to guarantee the quality of the coating.
Note:
Before cleaning the powder gun, switch off its control unit. The
compressed air used for cleaning must be free from oil and water!
Daily
1. Blow off the outside of the gun and wipe clean etc.
Weekly
2. Remove powder hose from connector
3. Remove the spray nozzle from the gun and clean it with compressed
air
4. Blow through the gun with compressed air, beginning from the
connection in flow direction
5. Clean the integrated gun tube with the supplied brush, if necessary
6. Blow through the gun again with compressed air
7. Clean the powder hose
8. Reassemble the gun and connect it
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.