Infrared Catalytic Burner HD242

1.Energy saving
2.Environmental protection
3.High radiation efficiency
4.Long life
5.easy installed

1.Energy saving
2.Environmental protection
3.High radiation efficiency
4.Long life
5.easy installed

HD242 Infrared Catalytic Burner:

Detailed product description

Type:HD242

Gas type:LPG or NG

Dimention:840L*130W*175H(mm)

Weight:11.7Kg/pc

Heat output:8120Kcal/hr or 9.4KW/hr

Gas comsuption:0.68Kg/hr for LPG under the pressure of 2.9Kpa

                       0.74m3/hr for NG under the pressure of 2.0Kpa

  

Material Descriptions:

Shell:gray cast iron
Upper cover:stamped  stainless iron
Burning net:Fe-Cr-Al material
Nozzle:brass
Core components:cordierite honeycomb burner plates with rare-earth catalyst-coated 
 

Working  principles of  the product:

Infrared catalytic burner uses the porous cordierite honeycomb combustion plate  with a special catalyst coated as a core component .

Its catalytic combustion is  the best combustion mode ,which means that  gas  (natural gas, liquefied petroleum gas) and combustion-supporting gas (air) are mixed according to the scientific proportion through burner shell (pre-mixed room) with the precise design and manufacturing . Ignited by the ignition, the gas mixture is burning on surface of catalyst which lies in the holes of porous cordierite honeycomb plate .The vast majority(95%) of the heat generated  in the form of infrared radiation penetrate the object directly,put an end to energy loss caused by heating the air to heat the object, the mode of heat convection heating , greatly improve  the energy conversion ability so as to  further save the energy (save 60% of the operation costs under the same industrial conditions compared to the ordinary heating mode --electric heating ).Gas is almost under complete combustion as a result of catalytic combustio. the flue gas pollution is extremely low (CO <0.02%, NOX <10ppm) ,fully meeting the national environmental standards and  there is no need for direct exhaust  fan.

  

 

3. Applied Range

    A. Food Industry:
Rice Biscuit assembly line, grilled chichen biscuit, egg roll, roasting shredded squid oven, roasting oven for   pachyrhizus, smokeless oven, griddle, middle eastern oven, hot pot oven, roasting pachyrhizus oven, snack car, soup oven, cooking assembly line, infra-red gas baking pan, deep-fry assembly line, water-removing machine, baking, etc.

 

   B. Painting Industry
Liquifized or powered painting assembly line, warm-up, preliminary treatment of heating, desiccating wood, galvanization drying assembly line, phosphatization drying assembly line.

 

   C. Fibre industry
Carpet latex dryer, dyeing dryer, printing dryer, textile dryer, industrial clothes dryer, latex gloves drying assembly line.
Glass and ceramics industry: Enamel firing dryer, glassoven, heatiheat-setting machine, mould drying, fritting, parching

   

     D. Paper industry
All kinds of paper dry lines and auxiliary drying heat wall.

 

    E. Farming and animal husbandry
Heating of barton, heating of crops, grain dryer.

 

    

Item	Technology            Petroleum
Gas  species	Nature Gas/Liquefied petroleum gas/Oil gas/ The artificial coal gas
Light-off temperature	≥ 350º C
Complete combustion temperature	≤ 380º C
Heat source temperature	850º C
Heating temperature range	30º C---850º C
Heating temperature range	1.9μ m----15μ m
Furnace front pressure	2000pa(NG) /  2800(LPG)

 

 

Comparison table of energy consumption

Furnace type   Parameters	Electronic cooker	Oil furnace	Coal-fired furnace	Infrared catalytic heaters
Energy requirement	10,000Kcal	10,000Kcal	10,000Kcal	10,000Kcal
Temperature	180	180	180	180
Energy consumption	Electricity(15 kW/h)	Electricity (1Kw/h)+ diesel (2Kg)	Coal (10Kg)	LPG(0.9Kg)
Heating time	20 minutes	40 minutes	90 minutes	5-8 minutes