bbq Infrared Gas Burner HD538

1.50% energy saving
2.Long life
3.High radiation efficiency
4.Environmental friendly
5.Main market:Sou

1.50% energy saving
2.Long life
3.High radiation efficiency
4.Environmental friendly
5.Main market:Southeast Asia,Euro

 

Model	Length (mm)	Width (mm)	Hight(mm)	Weight (kg)	Heat Output		Diameter of the Nozzle	Pottery Shades
					BTU/h	Kcal/h
HD538	538	85	65	1.4	13500	3400	ø1.05	4

 

Main Purpose of HD538 Barbecue Grill:

• Barbeque, food baking process and so on. It can save 50% energy when using this kind of products;
• mainly installed on the innermost firewall of ovens;
• The combustion front is at right angle to a plane. So it is usually called back furnace;
• It is widely used in high-grade combined-type oven in North America and in snack car/teppanyaki/duck furnace in China.

   Advantages:

• Energy saving: conversion rate: above90% 
• Environmental protection: CO:below 80ppm;NOx: below 10ppm;CHx: below 50ppm 
• Whole combustion: 95% of energy released in the form of infrared ray; heating the objects directly 
• Long useful time:  above 11000hr
• Easily installed

Summary of the product:

Infrared catalytic burner uses the porous cordierite honeycomb combustion plate  with a special catalyst coated as a core component .

 

Its catalytic combustion is  the best combustion mode ,which means that  gas  (natural gas, liquefied petroleum gas) and combustion-supporting gas (air) are mixed according to the scientific proportion through burner shell (pre-mixed room) with the precise design and manufacturing . Ignited by the ignition, the gas mixture is burning on surface of catalyst which lies in the holes of porous cordierite honeycomb plate .

 

The vast majority(95%) of the heat generated  in the form of infrared radiation penetrate the object directly,put an end to energy loss caused by heating the air to heat the object, the mode of heat convection heating , greatly improve  the energy conversion ability so as to  further save the energy (save 60% of the operation costs under the same industrial conditions compared to the ordinary heating mode --electric heating ).Gas is almost under complete combustion as a result of catalytic combustio. the flue gas pollution is extremely low (CO <0.02%, NO _x <10ppm) ,fully meeting the national environmental standards and there is no need for direct exhaust  fan.

 

The user manual

Table 1:The use of technical parameters

Items	Technical parameters
Types	natural gas (NG),liquefied petroleum gas (LPG)
Light-off temperature	≥350
complete combustion temperature	≤380
Heat source temperature	around 850
Baking temperature range	30---850
Wavelength range	1.9μm--15μm
Furnance pressure natural	2000pa(NG)/2800pa(LPG)