group nameHot dipped Galvanized Steel Pipe/Tube
Min Order20 piece
brand namezhaolida
payment methodT/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow
update timeThu, 24 Jan 2013 14:57:33 GMT
Technique ERW
Grade Q195-Q345
Thickness 2.0 - 5.4 mm
Outer Diameter 10.2 - 165.1 mm
Application Fluid Pipe
Secondary Or Not Non-secondary
Min Order20 piece
Our products have been exported to South America and Asia and Africa market.
Applications:
Water Pipelines, Waste waterlines , Water supply main
Deep tube wells casing pipes, Gas/Natural gas pipe lines, Oil pipe lines, LPG & other non-toxic gas pipelines
Industrial Purposes, Sewerage system, Industrial water lines/plant piping, Vehicular chassis and frames,
Idlers & belt conveyors,Agriculture and Irrigation,Scaffoldings, Electrical Cable conduits, Cooling towers, Antenna and Telecom Towers, Cold storages, Tabular polesFire Protection Systems, HVAC, Plumbing,Fabrication industry, Food Processing, Pharmaceutical, Petrochemical, Chemical, Machine Building, Automobile
Features:
Leak proof finish, Durable finish standards, Superior tensile strength, Dimensionally accurate, Highly durable, High durability, Increased bend ability, Responsive to rigorous fabrication, Long-term corrosion resistance, Exhibits high metallurgical properties.
Size scope:
This standard covers tubes of specified outside diameter 10.2mm to 165.1mm (thread size 1/8 to 6 )in two series, medium and heavy, and three type of designated thicknesses.
Manufacturing process:
The tubes shall be manufactured by a seamless(s) or longitudinally welded(W)process.
Steel grade
S195T No.1.0026
Chemical Composition:(%)
C:max:0.20
Mn,max:1.40
P,max:0.035,
S,max:0.030
Mechanical properties:
Upper Yield Strength min(Mpa):135
Tensile strength (Mpa):320 to 520
Elongation min(%):20
Inspection:
1) Tensile test, be performed on bare tube in accordance with EN10002-1
2) Bend test: be applied to bare tubes with specified O.D of 17.2mm up to and including 60.3mm and be carried out in accordance with En10232 to an angle of 90 degree .
3) Flattening test: be applied to bare tubes with specified outside diameters greater than 60.3mm and be carried out in accordance with En10233.
4) Leak tightness test: Each tube (before threading, if applicable) shall be tested for leak-tightness.The test shall be either hydrostatic test or electro-magnetic test in accordance with En10246-1.
5) Dimensional inspection;
6) Visual examination
Marking:
H or M:indicate the series
L,L1 or L2 indicate the type
S or W indicate the tube manufacturing process, seamless or welded.
Delivery conditions:
For tube ends:
1) The tube ends shall be cut nominally square to the axis of the tube and shall be free from excessive burrs..
2) Tube ends shall be supplied with external taper threads in accordance with EN10226-1/EN10226-2.
3) Tube shall be supplied with one socket per tube.
4) One cap or plug fitted to each tube end.
5) With the thread varnished or with thread protection.
For hot dip galvanized condition:
1) shall be supplied galvanized according to EN ISO 1461
2) shall be supplied galvanized according to EN 10240.
Professional product line and good service! Anyone is welcomed!
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.