FR4 1.6mm Multiple board Makeup Of Double-Side PCB

contact supplier

Paramtents

FR4 1.6mm Multiple board Makeup Of Double-Side PCB
Without "X" for panel
Routing and V-Cut With Slots
Tested 100%

Material:FR4,CEM-1,CEM-3,High TG150-170,Aluminum

copper:0.5oz,1oz,2oz,3oz,4oz,5oz

1-30layer

Min holes:0.2mm for drill

Min line/space:4mil/4mil

Surface finish: HAL/HAL Lead-free, ENIG, Plating gold, Chem Tin/Ag, OSP

Outline Profile: CNC routing/V-Cut/Beveling/Punching

100% E-test

Customed our products based on your need: material, specification, etc.

1.PCB Made Ability:

Item	Technical Standards
Rise			1-30 Layer
Material			FR-4,CEM-1,CEM-3,Hight TG,FR4 Halogen Free,FR-1,FR-2,Aluminum
Thickness			0.2mm-3.2mm(8mil-126mil)
Minimum thickness			0.075mm(3mil)
Cu			1/2 oz min;5 oz max
Min line width/spacing			0.075mm/0.1mm(3mil/4mil)
Min drill hole			0.2mm(8mil)
Punching the smallest aperture			0.9mm(35mil)
Surface finish/treatment			HALS/HALS lead free,Chemical tin,Chemical Gold,Immersion Silver/Gold,Osp,Gold Plating
The largest size puzzle			610mm×508mm
Tolerance		Pore spaces	+/-0.075mm(3mil) CNC Driling
		Line width	+/-0.05mm(2mil)or
		Line width	+/-20% of original artwork
		Aperture	PTH L:+/-0.075mm(3mil)
		Aperture	Non-PTH L:+/-0.05mm(2mil)
		Appearance Tolerance	+/-0.125mm(5mil) CNC Routing
		Appearance Tolerance	+/-0.15mm(6mil) by Punching
		Warp	0.70%
Insulation Resistance			10Kohm-20Mohm
Conduction Resistance			<50ohm
Test voltage			10-300V
MLB	Interlaminar deviation		4 layers:0.15mm(6mil)max
MLB	Interlaminar deviation		6 layers:0.25mm(10mil)max