Car driving recorder SL-HD806

1 seamless loop recording function

2 car starts automatically recording, turnoff delay

3 recording function while charging

4 cars with anti-shake function

5 AV OUT function

6 infrared night vision, illumination, 5million pixel CMOS sensor

7 maximum support 32GB TF memory card

8 can be equipped with Bluetooth (voicebroadcast call number)

9 ultra-wide 120 degree lens. (99141 lensAmbarella play mode, ultra-high definition)

10 2.7-inch high-definition TFT display.

11 video formats: AVI .1280 x720P 30fps

12 Photo format: JPEG. 3M

Operating Instructions:

DVR with video, camera, preview , AV OUT,network cameras feature , when used according to their needs , insert the TFcard before use .

[1] Recording Mode

Press the power key or connect the charger, DVR automatically enter video mode and start recording , then the blue lightflashes. Recording, press the record button to stop recording, this time a longbright blue light .

Work using the charger when the charger ispowered off , DVR delay of 5 seconds after the automatic shutdown .

[2] camera mode

Press the Mode button to select boot toenter the camera mode, press the OK button to take a picture.

[3] Playback mode

Press the Mode button to select boot into thepreview mode , press the Up / Down keys to select the video file or photo files, press the OK button to play or pause , press the mode button to exit previewmode.

[4] AV OUT function

   Through AV cable ,TV , etc. with the device connected to the output terminal , audio and videosignals can be output on the TV and other end-

Side display .

Motion detection function [5]

The shooting mode menu < motiondetection > entry is set to < On> , start motion detection function .If the device to capture moving objects , you automatically enter a 1 minutelong video recording and save. After 1 minute, if the object is still moving ,the system will automatically start the next 1 minute long video recording andsave it until the object stops moving , the system will stop recording andcontinue detection.

Exit motion detection , automatically turnoff motion detection feature.

[6] Charge

   DVR can beconnected to the charger , the charging indicator light long bright red whenfully charged, the red light goes out.

[7] connected to the computer

1. U disk function: Verify that the systemmenu item selection <USB功能> as a disk drive , a USB data cable to connect computer , thenthe computer will appear on a removable disk , the device enters the U diskmode. In the U disk mode, the recorded file can be copied or cut to a computerplayer , TF card can also be removed using the card reader reads the data .

2. PC camera function: Verify that thesystem menu item selection <USB功能> as PC camera ,connected to the computer with a USB data cable , the computer will appear on astandard video equipment , then you can use as PC camera .

[8] Date and Time Set

  Select the System menuinterface < Time settings> item, press OK key to enter into the date andtime setting interface.

The date and time setting interface , pressthe OK button to select the year, month , day, hour , minute, use the Up / Downkeys on the year, month, day, hour , minute adjustments , all set up, press theOK button to confirm exit.

[9] system reset

If the equipment in the course of unusualcircumstances , please use 1mm diameter small stick press the reset button ,the system will automatically reset.