200 - 1,500 kilogram
group nameLife casting silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-923
payment methodL/C, T/T, Western Union
update timeWed, 02 Jul 2014 14:27:15 GMT
color any color
brand hongye silicone
application make mold
shelflife 12month
HS code 39100000
status liquid
sample free of charge
Min Order200 kilogram
HY-923 Liquid Silicone for elastomeric article is a two-component liquid silicone rubber for injection molding processes. HY-923 shows a higher productivity, less yellowing and low volatile contents. HY-923 would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.
Specification of Liquid Silicone for Elastomeric Article:
Vulcanisates consisting of HY-923are distinguished by the following properties:
·High flowability, low viscosity and short injection time.
·Low volatiles content; Fast cure
·Excellent mold release, Excellent Thermal stability
·Excellent compression set; Excellent resilience
·High stability to ozone and ultraviolet light
·Outstanding resistance to ageing
·Not readily combustible, does not melt or drip
·Easy-pigmentable with LSR Colour Pastes fulfill the requirement of KTW
Application of Liquid Silicone for Elastomeric Article:
Because of the outstanding properties,HY-923 is particularly suitable for the following elastomeric articles: sealing elements, O-rings, stoppers,diaphragms, keypads, bellows, vibration dampers, air vent flaps, switch covers, pressure cookers parts, cable connectors s.o.
Typical Physical Properties of Liquid Silicone for Elastomeric Article
HY-923 Liquid Silicone for Injection Molding | |||
A Component | B Component | ||
Appearance | translucent | translucent | |
Viscosity in Pa.s | DIN 53018 | 600 | 600 |
Pls mix part A and part B by mixing ratio 1:1. The mixture will get formed to be molds with size 150mm*150mm*2mm within 1mins under Temperature 150 centi degrees. | |||
Density | DIN 53 479 A | g/cm3 | 1.08 |
Hardness | DIN 53 505 | Shore A | 40 |
Tensile strength | DIN 53 504 S2 | N/mm2 | 6.5 |
Elongation at break | DIN 53 504 S2 | % | 550 |
Tear strength | ASTM D 624 die B | N/mm | 35 |
Processing Recommendations of Liquid Silicone for Elastomeric Article
Ready-to-use mixtures (of the components A and B) are fed directly to the injectionmoulding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 1:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230°C, the addition -crosslinking silicone rubber vulcanises free of dissociation products within a few seconds. Excellent flowability and easy demoulding permit fully automated production of large numbers of articles in shorter total cycle times.
PACKAGE of Liquid Silicone for Elastomeric Article:
Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
SHELF LIFE of Liquid Silicone for Elastomeric Article:
8-10 months when stored under 24°C in original unopened packages.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.