condensation silicone (Tin catalyst series)

condensation silicone applications

condensation silicone is mainly used in mold making for the manufacturer of products made of unsaturated resin, epoxy resin, polyurethane, cultural relic duplication, architectural decoration, resin crafts, lighting ornaments, candles, statues, model design, product exploitation etc.

condensation silicone features:

condensation silicone type with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. It is suitable for small products or fine and precision products which is difficult to demould. Condensaton silicone rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage less than 0.2%.

condensation silicone datasheet:

Model: 638 condensation silicone

Appearance: White
Viscosity (cs): 14000-16000
Hardness (A): 22-25
Tensile strength (kgf /cm) ≥35-36
Elongation break: (%)≥450
Retractility (%): ≤0.3
Curing agent mixed rate (%): 2-3
Operate time (min): 30
Curing time (hours): 2-4

Model: 728 condensation silicone
Appearance: White
Viscosity (cs): 15000-18000
Hardness (A): 26-30
Tensile strength (kgf /cm) ≥35-36
Elongation break: (%)≥450
Retractility (%): ≤0.3
Curing agent mixed rate (%): 2-3
Operate time (min): 30
Curing time (hours): 2-4

Model: 788 condensation silicone
Appearance: White
Viscosity (cs): 15000-18000
Hardness (A): 30-35
Tensile strength (kgf /cm) ≥35-36
Elongation break: (%)≥450
Retractility (%): ≤0.3
Curing agent mixed rate (%): 2-3
Operate time (min): 30
Curing time (hours): 2-4

condensation silicone using instruction:
condensation silicone: Component A is white flowing liquid and component B is the curing agent. For example, take silicone rubber of 100g and add 2g curing agent for mixing evenly (silicone rubber and curing agent must be measured accurately). After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. If you don't have vacuum machine, please add 1.2% or 1.5% curing agent so that the bubbles can bubble itself. Since the less curing agent you add, the slower the mould will curdle, the bubbles will bubble out itself.

More details of condensation silicone rubber, pls feel free to contact Taylor:

Tel:086-755-89212380

Mob:086-18938867522

Skype: taylordl828