Casting silicone materials for fountains and garden articles

Casting silicone materialscasting materials

Appearance: white

Viscosity (cs): 25000

Hardness (A): 20-22

Tensile strength(kgf/cm² ) ≥35

Tear strength (kgf /cm):≥25

Elongation break(%):≥500

Retractility (%):≤0.2

Curing agent mixed rate (%):2-3

Operate time (min): 30

Curing time (hours): 2-4

Model:  625# Casting silicone materials

Appearance: white

Viscosity (cs): 18000

Hardness (A): 25

Tensile strength(kgf/cm² ) ≥35

Tear strength (kgf /cm):≥22

Elongation break(%):≥320

Retractility (%):≤0.2

Curing agent mixed rate (%):2-3

Operate time (min): 30

Curing time (hours): 2-4

Model:  630# Casting silicone materials

Appearance: white

Viscosity (cs): 12000-15000

Hardness (A): 28-32

Tensile strength(kgf/cm² ) ≥35

Tear strength (kgf /cm):≥20

Elongation break(%):≥470

Retractility (%):≤0.2

Curing agent mixed rate (%):2-3

Operate time (min): 30

Curing time (hours): 2-4

Operation of Casting silicone materials

1. deal with original moulds

2. brush on release agent

3. correct weigh accoring to mixng ratio

4. stir the two component evenly

5. vacuum-pumping

6. pouring

 Casting silicone materials Features:

(1) Silicon rubber for pad printing with SGS and ROSH approval

(2) Curing agent arrange together as free charged

(3) In liquid form and in various colors

(4) With an exceptional fluidity and good operability.

(5)Temperature and deformation resistance as well as low shrinkage.

(6) High duplication times.

(7) Sample orders are available

(8) MOQ: 100KG

Any questions for Liquid Mould Making Silicone Rubber, pls feel free to contact Taylor:

Tel: + 86-755-89212380

Mob: +86-18938867522

E-mail: hyw(at)szrl(dot)net

Skype: taylordl828

Facebook: hyw(at)szrl(dot)net