liquid molding silicone elastomer

Operations of molding silicone elastomer:

Step One: Take 100g of part A and add 2g of part B and mix the molding silicone elastomer and curing agent evenly.

Notes: molding silicone elastomer is a kind of flowing liquid and it contains two parts. Part A is a kind of white flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the molding silicone elastomer will be partly solidified and this will give birth to difficulties in your final operation. What is more, the finished molding silicone elastomer molds will meet a short life. All of these will cause a waste of molding silicone elastomer.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes. Otherwise, it will cause , and no more further steps will be available

Step Three: Perfusion Molding

The perfusion molding is an easy way to make molds, it is  Slowly and evenly perfuse the mixed silicon rubber into the square frame. After the cross linking reaction

Any further information of molding silicone elastomer required,

please feel free to contact 

Mr Chris

TEL: 086-755-89948006

FAX: 086-755-89948030

Mobile:86-189 3886 7508

Skype: chrisyao211