100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelpad printing silicone rubber
payment methodT/T, L/C, Westem Union
update timeTue, 05 Nov 2013 11:26:48 GMT
condition liquid
color adjustable
Min Order100 kilogram
pad printing silicone application:
Pad Printing Silicone is mainly applicable to the printing of irregular patterns on plastic toys, electroplating products, electronic toys, trademarks, artwork gifts, stationery, etc.
Pad Printing Silicone Features and Advantages:
Model | Viscosity (cps) | Hardness (A.) | Tensile Strength (Mpa) | Tear Strength (KN/m) | Elogation(%) | Mixing Ratio (%) | Pot Life (H) | Demould Time(H) |
901 | ≤33000 | 25-28 | ≥3.0 | ≥20 | ≥360 | 2-3 | 0.5 | 2-4 |
902 | ≤33000 | 25-28 | ≥3.2 | ≥22 | ≥380 | 2-3 | 0.5 | 2-4 |
912 | ≤33000 | 25-28 | ≥3.5 | ≥24 | ≥420 | 2-3 | 0.5 | 2-4 |
916 | ≤35000 | 25-28 | ≥3.5 | ≥24 | ≥420 | 2-3 | 0.5 | 2-4 |
918 | ≤33000 | 18-20 | ≥3.6 | ≥26 | ≥420 | 2-3 | 0.5 | 2-4 |
901#/902#/912#/916#/918# Pad Printing Silicone Rubber(Condensation RTV-2 with Tin Catalyst) has the advantage of good printing effects, fine quality, good resilience and without any impurity. The silicone pad is a carrier which transfers the patterns from the steel plate onto the surface of products.
Pad Printing Silicone Operations:
Firstly, clean the mold with detergent, and dry it by a piece of cloth or an air gun, then spray the mold with a layer of release agent;
Secondly, the addition of silicone oil. The ratio of pad printing silicon rubber to the silicon oil depends on the size of pattern which customer needs to print. The larger the pattern is, the softer the printing pad should be, and more silicon oil needs to add. Contrarily, if a silicon pad with high hardness needed, silicon oil should be added less or none. General hardness of the printing pad is 15A°~-25 A°. If too much silicon oil added in the silicon rubber, the printing pad will be too soft, and this will limit the printing times. Because silicon oil will destroy the molecular of the silicon rubber, no matter how supreme quality the silicon rubber is. And therefore, the printing pad will be abrasive and intolerant. General mixing proportion is 30-50g silicone oil to 100g liquid siliconerubber.
Thirdly, the addition of curing agent. Mix 100g silicon and 30-50g silicon oil sufficiently and evenly, then add the curing agent which is 2%-3% of the total weight of the silicon and the silicon oil, keep stirring for 2-3 minutes, and then deair to remove the air bubbles.
Further information, please feel free to contact Firleanna:
SKYPE:HY-Firleanna
T: 86-755-85224692
M:86-18938867520
F: 86-755-89948030
3w(dot)szrl(dot)net
3w(dot)sellsilicon(dot)com
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.