200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelMOLDING SILICONE RUBBER
payment methodT/T, L/C, Westem Union
update timeTue, 05 Nov 2013 11:31:00 GMT
Color White(different colors are available if requested )
Curing Agent 5%for free charged
Usage for many produce mold making in pouring way
Origin China
HS code 3910 0000
application for gypsum molding
Model HY625# hy630# hy638#silicone rubber
transportation by sea or by air
CD for how to make mold free
Min Order200 kilogram
Liquid Silicone For Gypsum Mold
Liquid Silicone For Gypsum Mold Description
Silicon rubber for molding making is primarily intended for poly resin crafts,PU crafts,PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory,Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Liquid Silicone For Gypsum Mold for features
Silicon rubber for mold making is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength ,tear strength and elongation.
HY-638#MOLDING SILICONE FOR STONE
HY-638# molding silicon is particularly suitable for artificial stone ,gypsum/plaster ,toy gifts and craftwork gifts with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. It is suitable for large products or fine and precision products which is difficult to demould. This molding silicon is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is up to 2‰.
Model | Appearance | Viscosity (cps) | Hardness (Ao) | Tensile Strength (Mpa) | Tear Strength (KN/m) | Elongation (%) | Mixing ratio(%) | Operating Time(H) | Curing Time(H) |
HY-638 | White | ≤38000 | 36±2 | ≥3.8 | ≥28 | ≥360 | 2~3 | 0.5~1 | 2~5 |
Liquid Silicone For Gypsum Mold for operations
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)
FAQ of Liquid Silicone For Gypsum Mold 1. Why could the silicone mold be reused only for a few times?
It can be due to the following reasons:
a. Adding too much silicone oil in to silicon rubber. Silicon oil is an additive which destroies the molecular weight of silicone rubber and reduce the tension and tear strength.
b. Using the silicon rubber with a high hardness to make molds for small sized products with delicate and intricate designs and the silicon rubber with a low hardness to makes molds for large sized products with simple designs.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.