RTV 2 silicone rubber for artificial stone molds making

Applications of RTV 2 silicone rubber for artificial stone molds making  

The RTV 2 silicone rubber can be used for artificial stone casting molds ,and it also can be used for   making various molds,such as reproduction of concrete or cement , poly resin, epoxy, polyurethane-polymer, plaster, gypsum, soaps, candle & lighting, architecture, decorative  arts and crafts, plastic toy, gift and stationery, big statue, cultural relic product, etc..

Datasheet of RTV 2 silicone rubber for artificial stone molds making 

RTV-2 molding silicon rubber

Features of RTV 2 silicone rubber for artificial stone molds making 

resistance to deformation,

high-temperature resistance

acid-alkali resistance

expansion as well as high reproduction times,

good tensile strength ,

Strong Tear strength

Good elongation

Low shrinkage

Long shelf time which can reach at least 1 year

Operation guide of RTV 2 silicone rubber for artificial stone molds making 

1. Stir part A and part B with right mixing ratio (100:5) evenly. And get the mixture for vacuum-pumping. (If there is no vacuum machine, just mix less catalyst)

2. Clean your products and brush a layer of release agent (detergent or soap water) on your product.

3. Pour the mixture with correct mixing ratio into the model frame.

After about 3-5 hours, when the silicone get cured, take out the original mold, and there is th finished silicone mould.

1. Stir part A and part B with right mixing ratio (100:5) evenly. And get the mixture for vacuum-pumping. (If there is no vacuum machine, just mix less catalyst)

2. Clean your products and brush a layer of release agent (detergent or soap water) on your product.

3. Pour the mixture with correct mixing ratio into the model frame.

After about 3-5 hours, when the silicone get cured, take out the original mold, and there is th finished silicone mould.

 RTV-2 silicone rubber for electronic potting compound

Brief Introduction of Electronic potting compound silicone rubber
Electronic potting compound silicone rubber is a code of addition cure silicone rubber, which is similar to KCC potting silicone rubber. It has a low viscosity and mixing ratio 1:1, easy in operation and pourable. The electronic potting compound silicone rubber is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and anti-vibration.

Applications of Electronic potting compound silicone rubber
The potting silicone rubber is a kind of low viscosity, Inherent flame resistance, two components silicone rubber with heat-conducting. It can cure in both room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. The flame retardant UL94-V0 level can be achieved. It mainly applied in electronic components surface with materials of PC (Poly-carbonate),PP,ABS,PVC, etc. and metal materials.

Operation of Electronic potting compound silicone rubber
1.    Put part A and part B in separate container with equal dosage and stir evenly when mixing the two parts together.
2.    Put the mixture into the vacuum machine under 0.08 MPa for 5 minutes.
3.    The temperature influences the curing time of electronic potting silicone rubber. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.

Storage of Electronic potting compound silicone rubber
Electronic potting silicone rubber is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about 12 months from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.  

Package of Electronic potting compound silicone rubber
5kg/drum, 20kg/drum and 200kg/drum

Place of Origin                                          Guangdong China
Brand Name                                             Hong Ye Silicone Rubber
Model Number:                                       HY-9300, HY-9315, HY-9325
Appearance                                              Liquid silicone rubber
Mixing ratio                                               1:1
Color                                                         Transparent
Pot life/working life                                 50-60 mins
Curing time                                             5-6 hours
Minimum Order Quantity:                    200 Kilogram
Packaging Details:                               20kg/drum,200/drum
Delivery Time:                                       within 3 days after payment confirmed in our bank.
Payment Terms:                                    L/C,T/T
Supply Ability:                                       8 Ton per Day
Certifications:                                      RoHS. UL cert. MSDS.SGS ISO9001:2000

Our factory:

Any more information , pls feel free to contact Ms Shirley 

also call office no. 0086-755-89948019

Mob:86-15220170905

Skype: patch8826

Write to hyh(at)szrl(dot)net  

Welcome to our website  www dot szrl dot net