200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY628# silicone rubber
payment methodT/T, L/C, Westem Union
update timeTue, 05 Nov 2013 11:54:16 GMT
Mixing ratio 100:5, 10:1, 1:1
MOQ 200kg
Payment T/T L/C Western union
Package 25kg/drum 200kg/drum
Features Liquid
Port shenzhen
HS Code 39100000
Certifications RoHS, MSDS, SGS, ISO9001:2000
Min Order200 kilogram
1. Casting Silicone for GRC molding HY628
Model | Appearance | Viscosity (cps) | Hardness (Shore A0) | Tensile-strength(kgf/cm2) | Tear-strength (kgf/cm) | Elongation(%) | Mixing Ratio (%) | Operating | Demould Time(hrs) |
628 | adjustable | 26000-30000 | 26±2 | ≥45 | ≥27 | ≥ 460 | 5 | 0.5 | 3-5 |
2. Casting Silicone for making GRC molding features:
1). Two-part silicon rubber:flowable liquid silicon and curing agent.
2). Cures at room temperature within 3-5 hours.
3). An exceptional fluidity and good operability, easy to demold.
4). Good tensile and tear strength, low shrinkage.
5). High duplication times.
3. HY628 Casting Silicone for GRC molding application:
liquid silicone rubber stone mouldings is mainly applied for making various molds:
liquid silicone rubber stone mouldings can used to reproduce concrete or cement, gypsum, gypsum, architecture, decorative arts and crafts, big statue, cultural relic product, etc.
liquid silicone rubber stone mouldings can used to reproduce poly resin, epoxy, polyurethane-polymer, plastic toy, gift and stationery.
liquid silicone rubber stone mouldings can also used to reproduce soaps, candle & lighting.
4.Frequently asked questions of Casting silicone for GRC moldingrubber
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
Any question about silicon rubber, Pls feel free to contact Christy
TEL: 086-755-89948006
FAX: 086-755-89948030
Mobile: 86-189 3886 7547
Skype: christyxu911
Email: hyxj(at)szrl(dot)net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.