PCB Electronic Potting Silicone Rubber with high quality

PCB Electronic Potting Silicone Rubber HY-215# Features & Applications

PCB Electronic Potting Silicone Rubber HY-215# is in two parts with low viscosity.

PCB Electronic Potting Silicone Rubber HY-215# can be cured completely at room temprature.

PCB Electronic Potting Silicone Rubber HY-215# works on the surface of material as PC(Poly-carbonate), PP, ABS, PVC as to its superior bonding feature.

PCB Electronic Potting Silicone Rubber HY-215# is also applicable for insulation, waterproof and bonding of electronics parts.

PCB Electronic Potting Silicone Rubber HY-215# meets the requirements of European RoHs.

PCB Electronic Potting Silicone Rubber HY-215# Typical Application
-Potting for Protection of general electronic module.
-Outdoor protection for LED screen.

PCB Electronic Potting Silicone Rubber HY-215# Technical Parameters

(Pls note all data of PCB Electronic Potting Silicone Rubber HY-215# above is in 25C with 55% humidity conditions. We don't guarantee a same date if testing under different conditions, or when data was regenerated).

Warm Tips
 1. Sealing pakage for storage. The mixture should be used up at once to avoid wasting.
 2. Silicone belongs to non-dangerous goods, but keep away form mouth and eyes.
 3. When it gets stratified after a period of storage, Please mix HY-210# evenly before using,
      it does not affect the performance.
 

Package
22kg/set (Part A 20kg + Part B 2kg)

Shelf Life and Transportation
1. Twelve(12) months when stored at 25C in original unopened packages.
2. This is a non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.

Technical Guidelines
1. Pls put part A and B in separate container and stir evenly before mixing the two
   parts together.
2. Mixing Ratio part A:part B is 10:1
3. Bubble release if necessary, deaeration the mixture under 0.08 MPa for 3 minutes.
4. HY-215# is cured at roon temperature, so pls put it under room temperature after
   pouring. It comes to next process when basically cured, and it takes about 24 hours
   for completely cured.

Kindly note: Temperature and Humidity with a tremendous influences for curing of HY-215#.

Further information, please feel free to contact Firleanna:

SKYPE:HY-Firleanna

T: 86-755-85224692

M:86-13480836856

F: 86-755-89948030

3w(dot)szrl(dot)net

3w(dot)sellsilicon(dot)com