200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY625# 628#
payment methodT/T, L/C, Westem Union
update timeTue, 05 Nov 2013 12:00:37 GMT
Min Order200 kilogram
1. RTV silicone rubber for plaster molding Application:
For making molds for plaster moldings, plaster cornice, plaster column, ceiling medallion, ceiling roses, ceiling centres, ceiling panel, paster corbels, plaster friezes, etc. It can also be used for other materials like resin, candle, wax, cement, fiberglass, etc., based on different size ,patterns and your operation method.
2. Liquid silicone for plaster molding Features:
Liquid Silicone for plaster molding is white flowing liquid with general hardness of 22-50A° After curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
3. Liquid silicone for gypsum colum mold making operations:
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; Contrarily, if molds requiring slower drying and demold, less curing agent is needed.
(Note: Our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould. )
4. 3. Liquid silicone for gypsum colum mold making datasheet:
Model | HongYe RTV 625# | HongYe RTV 630# |
Appearance | white | white |
Mixing Ratio (%) | 50:1~20:1 | 50:1~20:1 |
Operating time (mins 25 0C ) | 40~50 | 40~50 |
Curing time(hours 25 0C) | 4~5 | 3~6 |
Hardness (A°) | 25±2 | 26~30 |
Viscosity (Mpas -25 0C) | 18000~22000 | 20000~24000 |
Tensile-strength(kgf /cm² ) | 34~38 | 38~44 |
Tear-strength (kgf /cm ) | 20~24 | 24~28 |
Elongation-break(%) | 420~480 | 440~490 |
4. Frequently asked questions of mold making silicone rubber RTV2:
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products
If you have any questions with mold making silicone rubber RTV2 , pls feel free to contact Ms Angel Yue
MSN: angelfly369(at)msn(dot)cn
Skype:angelfly369
Email:hysa(at)szrl(dot)net
Tel:0086-755-89948006
Mob: 086-18938867575
Trademanager:cn200039753 .
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.