Liquid RTV Molding Silicone for Polystone Columns

Liquid RTV Molding Silicone for Polystone Columns

 Features of liquid rtv molding silicone

(1) liquid rtv molding silicone with SGS and ROSH approval

(2) Curing agent arrange together as free charged

(3) In liquid form and in various colors

(4) With an exceptional fluidity and good operability.

(5)Temperature and deformation resistance as well as low shrinkage.

(6) High duplication times.

(7) Sample orders are available

(8) MOQ: 100KG

 Operation of liquid rtv molding silicone

1. deal with original moulds

2. brush on release agent

3. correct weigh accoring to mixng ratio

4. stir the two component evenly

5. vacuum-pumping

6. pouring

(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)

During operate of liquid rtv molding silicone for mold making the three impotant thing to pay attention : 

  1. weigh theliquid silicone rubber and curing agent exatly .
  2. Stir theliquid silcone rubber and curing agent evenly .
  3.we shouldchoose the right hardness to making diffirent size of product mold.

FAQ of  liquid rtv molding silicone

  Why should the silicone mold be reused only for a few times?

It can be due to the following reasons:

a. Adding too much silicone oil in to silicone rubber.

b. Using the silicone rubber with a high hardness to make molds for small sized products

with delicate and intricate designs .

Any questions about Silicone Rubber, Leah is at your service.

TEL: 086-755-89212382

FAX: 086-755-89948030

MOBILE: 086-189 3886 7561

Website: www(dot)szrl(dot)net

E-MAIL: hyji(at)szrl(dot)net

Skype: leahchou1214

QQ: 189 3886 7561