High Strength RTV Silicone Rubber for Garden Statue Molds

High Strength RTV Silicone Rubber for Garden Statue Molds 

RTV Silicone (room temperature vulcanization silicone) is a type of silicone rubber made from a two-component system (base plus curative; A+B) available in a hardness range of very soft to medium - usually from 15 Shore A to 40 Shore. RTV Silicones can be cured with either a platinum catalyst or a tin catalyst. Applications include low temperature overmolding, making molds for reproducing, and some optically clear grades have lens applications.

RTV silicone rubber applications

RTV Silicone Rubber will reproduce the finest detail and is suitable for a variety of industrial and art related applications including prototypes, furniture, sculpture and architectural elements. RTV Silicone Rubber can also be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).

Features of RTV silicone rubber

1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. Favorable hardness
7. High temperature resistance, acid and alkali-resistance and ageing resistance 

Attention for making a mold by RTV silicone rubber

1. RTV Silicone Rubber is white flowing liquid with general hardness of 22-40A° after curing.
2. If the mold makers want to make large products and large size molds, the mold should be made of silicone rubber with high hardness. On the contrary, if the products with fine and precision patterns, it should be made of silicon with low hardness.
3. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; Contrarily, if molds requiring slower drying and demould, less curing agent is needed.
4. it doesn't better to add silicone oil into silicone rubber. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould. )

Any questions of Silicone Rubber, please feel free to contact Miss Leah:

TEL: 086-755-89212382

FAX: 086-755-89948030

MOBILE: 086-189 3886 7561

Website: www(dot)szrl(dot)net

E-MAIL: hyji(at)szrl(dot)net

Skype: leahchou1214

QQ: 189 3886 7561