silicone rubber for candle mould making

Silicon Rubber For Candle/Soap Reproducing with excellent fluidity, high tensile, tear-strength

Silicon Rubber For Candle/Soap Reproducing application:
Silicon Rubber For Candle/Soap Reproducing is two parts condensation liquid silicone rubber that can be cure under room temperature. silicone rubber mainly used for the manufacturer of products made of unsaturated resin, epoxy resin, polyurethane, etc.

Silicon Rubber For Candle/Soap Reproducing features:
Silicon Rubber For Candle/Soap Reproducing is mainly with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. 

Silicon Rubber For Candle/Soap Reproducing is the most suitable for small products or fine and precision products which is difficult to demould. This silicone rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage less than 0.2%.

Silicon Rubber For Candle/Soap Reproducinginstruction:

1. Adding curing agent 1%, the silicone can still be operated within 2.5 hours and can be  
    demoulded after 6-8 hours.

2. Adding curing agent 2%, the silicone can still be operated within 50 minutes to 1 hour and
     can be demoulded after 2-3 hours.

3. Adding curing agent 3%, the silicone can still be operated within 28 - 30 minutes and can
     be demoulded after 1.5-2 hours.

4. Adding curing agent 4%, the silicone can still be operated within 10 - 15 minutes and can
     be demoulded after 1 -1.5 hours.

Frequently asked questions of Silicon Rubber For Candle/Soap Reproducing

Why does the silicone rubber mold have few molding times? 

Silicon Rubber For Candle/Soap Reproducing has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products. 

The infomration just for reference,need more information about Silicon Rubber For Candle/Soap Reproducing,

Please feel free to contact with Ms. Judy at the number of 0086-18938867591 , QQ: 18938867591

Thank you for your attention~

Ms. Judy