100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY-E642 RTV Silicone Rubber
payment methodT/T, L/C, Westem Union
update timeTue, 05 Nov 2013 12:26:52 GMT
Appearance Liquid
Application Mold making silicone rubber
H.S. code 39100000
Color white/off-white/red/yellow/blue
Shelf life 12 months
Purity 100%
Curing agent 4% for free
Mixing ratio 1:1/ 10:1
Sample Free
Package Vacuum packing
Min Order100 kilogram
RTV Silicone Rubber
DATASHEET OF RTV SILICONE RUBBER
Model | HY-E642 |
Appearance | Yellowish Transparent |
Mixing Ratio | 1:1/ 10:1 |
Viscosity part A (Mpa.s) | 20000±2000 |
Viscosity part B (Mpa.s) | 3500±1000 |
Viscosity mixed(Mpa.s) | 8200 ±2000 |
Operating time ( Mins 25C) | 20-40mins |
Curing time ( Hrs 25C) | 2~3hrs |
Hardness (A°) | 42±2 |
Tensile-strength(kgf /cm2 ) | 60±5 |
Tear-strength (Kgf/cm ) | 17±3 |
Elongation-break(%) | 300±20 |
Retractility(%) | ≤0.1 |
FEATURES OF RTV SILICONE RUBBER :
1.Two-parts, flowable liquid silicon & curing agent.
Can solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.
2. Good tensile strength and tear strength,low shrinkage.
3. It gets cured at room temperature 25 0C within 5-7 hours.
4. An exceptional fluidity and good operability, easy to be demolded.
5. Suitable for pouring methods of operation for small sized molds making.
DESCRIPTION OF RTV SILICONE RUBBER:
E642# addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.
E642 addition cure silicone rubber is mainly used for molds making for food grade products. And it is also develop to solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.
APPLICATIONS OF RTV SILICONE RUBBER:
E642# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
OPERRATING INSTRUCTION OF RTV SILICONE RUBBER :
1.Stir part A and part B with right mixing ratio evenly. (E642# is 1:1) and get the mixture for vacuum-pumping.(If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).
2.Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4.Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE OF RTV SILICONE RUBBER :
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE OF RTV SILICONE RUBBER :
Packed in clean 25kg/pail, 200kg/pail.
Pls kindly note:
Since this product is a newly develop one and is still on the path of promoting, We will offer you very competible price at this moment to suppport you on expanding the market and compete with other brands. This is a good chance for you to earn more money and occupy the market!
IF THERE'S ANY QUESTIONS OF OF RTV SILICONE RUBBER, PLS FEEL FREE TO CONTACT TAYLOR:
TEL:086-755-89212380
MOBILE:086-18938867522
Skype: taylordl828
Facebook: hyw(at)szrl(dot)net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.